On Fri, 2015-07-31 at 20:53 +0800, Chenhui Zhao wrote:
In the last stage of deep sleep, software will trigger a Finite
State Machine (FSM) to control the hardware precedure, such as
board isolation, killing PLLs, removing power, and so on.
When the system is waked up by an interrupt, the FSM controls the
hardware to complete the early resume precedure.
This patch configure the EPU FSM preparing for deep sleep.
Signed-off-by: Chenhui Zhao <chenhui.zhao@xxxxxxxxxxxxx>
---
arch/powerpc/platforms/85xx/Makefile | 2 +-
arch/powerpc/platforms/85xx/sleep_fsm.c | 256
++++++++++++++++++++++++++++++++
arch/powerpc/platforms/85xx/sleep_fsm.h | 104 +++++++++++++
3 files changed, 361 insertions(+), 1 deletion(-)
create mode 100644 arch/powerpc/platforms/85xx/sleep_fsm.c
create mode 100644 arch/powerpc/platforms/85xx/sleep_fsm.h
When I asked why this was in drivers/platform[1], you said it was to share
with LS1, and that the values used were the same -- so why did you move it to
arch/powerpc?
[1] Note that other proposed patches create a drivers/soc/fsl instead of
drivers/platform/fsl... We need one of them, not both.
+void fsl_fsm_setup(void __iomem *base, struct fsm_reg_vals *val)
+{
+ struct fsm_reg_vals *data = val;
+
+ BUG_ON(!base || !data);
This BUG_ON is useless. If one of those is NULL you'll get an oops anyway.
diff --git a/arch/powerpc/platforms/85xx/sleep_fsm.h
b/arch/powerpc/platforms/85xx/sleep_fsm.h
new file mode 100644
index 0000000..2c60b40
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/sleep_fsm.h
@@ -0,0 +1,104 @@
+/*
+ * Freescale deep sleep FSM (finite-state machine) configuration
+ *
+ * Copyright 2015 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef _FSL_SLEEP_FSM_H
+#define _FSL_SLEEP_FSM_H
+
+#define FSL_STRIDE_4B 4
+#define FSL_STRIDE_8B 8
Why not just use 4/8 directly?
+/* Block offsets */
+#define RCPM_BLOCK_OFFSET 0x00022000
+#define EPU_BLOCK_OFFSET 0x00000000
+#define NPC_BLOCK_OFFSET 0x00001000
I thought you said OK to not putting these offsets in the kernel source...
-Scott