[PATCH 02/15] rtc: rx8025: Convert to threaded IRQ

From: Alexandre Belloni
Date: Tue Aug 04 2015 - 05:49:42 EST


The driver currently emulates the concept of threaded IRQ using a
workqueue, switch to threaded IRQ instead.

Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
---
drivers/rtc/rtc-rx8025.c | 37 ++++---------------------------------
1 file changed, 4 insertions(+), 33 deletions(-)

diff --git a/drivers/rtc/rtc-rx8025.c b/drivers/rtc/rtc-rx8025.c
index a943e1c08263..d8737713135d 100644
--- a/drivers/rtc/rtc-rx8025.c
+++ b/drivers/rtc/rtc-rx8025.c
@@ -71,9 +71,7 @@ MODULE_DEVICE_TABLE(i2c, rx8025_id);
struct rx8025_data {
struct i2c_client *client;
struct rtc_device *rtc;
- struct work_struct work;
u8 ctrl1;
- unsigned exiting:1;
};

static int rx8025_read_reg(struct i2c_client *client, int number, u8 *value)
@@ -128,26 +126,12 @@ static int rx8025_write_regs(struct i2c_client *client,
return ret;
}

-static irqreturn_t rx8025_irq(int irq, void *dev_id)
+static irqreturn_t rx8025_handle_irq(int irq, void *dev_id)
{
struct i2c_client *client = dev_id;
struct rx8025_data *rx8025 = i2c_get_clientdata(client);
-
- disable_irq_nosync(irq);
- schedule_work(&rx8025->work);
- return IRQ_HANDLED;
-}
-
-static void rx8025_work(struct work_struct *work)
-{
- struct rx8025_data *rx8025 = container_of(work, struct rx8025_data,
- work);
- struct i2c_client *client = rx8025->client;
- struct mutex *lock = &rx8025->rtc->ops_lock;
u8 status;

- mutex_lock(lock);
-
if (rx8025_read_reg(client, RX8025_REG_CTRL2, &status))
goto out;

@@ -175,10 +159,7 @@ static void rx8025_work(struct work_struct *work)
status | RX8025_BIT_CTRL2_XST);

out:
- if (!rx8025->exiting)
- enable_irq(client->irq);
-
- mutex_unlock(lock);
+ return IRQ_HANDLED;
}

static int rx8025_get_time(struct device *dev, struct rtc_time *dt)
@@ -550,7 +531,6 @@ static int rx8025_probe(struct i2c_client *client,

rx8025->client = client;
i2c_set_clientdata(client, rx8025);
- INIT_WORK(&rx8025->work, rx8025_work);

err = rx8025_init_client(client, &need_reset);
if (err)
@@ -574,7 +554,7 @@ static int rx8025_probe(struct i2c_client *client,

if (client->irq > 0) {
dev_info(&client->dev, "IRQ %d supplied\n", client->irq);
- err = request_irq(client->irq, rx8025_irq,
+ err = request_threaded_irq(client->irq, NULL, rx8025_handle_irq,
0, "rx8025", client);
if (err) {
dev_err(&client->dev, "unable to request IRQ\n");
@@ -602,17 +582,8 @@ errout:

static int rx8025_remove(struct i2c_client *client)
{
- struct rx8025_data *rx8025 = i2c_get_clientdata(client);
- struct mutex *lock = &rx8025->rtc->ops_lock;
-
- if (client->irq > 0) {
- mutex_lock(lock);
- rx8025->exiting = 1;
- mutex_unlock(lock);
-
+ if (client->irq > 0)
free_irq(client->irq, client);
- cancel_work_sync(&rx8025->work);
- }

rx8025_sysfs_unregister(&client->dev);
return 0;
--
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/