Re: [PATCH] usb: musb: omap2430: use *syscon* framework API to write to mailbox register

[Felipe Balbi]

Hi,

On Tue, Aug 04, 2015 at 07:36:09PM +0530, Kishon Vijay Abraham I wrote:
> Deprecate using phy-omap-control driver to write to the mailbox register
> and start using *syscon* framework to do the same.
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
> ---
>  Documentation/devicetree/bindings/usb/omap-usb.txt |    7 +-
>  drivers/usb/musb/omap2430.c                        |  115 ++++++++++++++++----
>  2 files changed, 99 insertions(+), 23 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt
> index 38d9bb8..c001306 100644
> --- a/Documentation/devicetree/bindings/usb/omap-usb.txt
> +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
> @@ -20,10 +20,15 @@ OMAP MUSB GLUE
>   - phy-names : the names of the PHY corresponding to the PHYs present in the
>     *phy* phandle.
>  
> -Optional properties:
> +Optional Properties:
> +Deprecated properties:
>   - ctrl-module : phandle of the control module this glue uses to write to
>     mailbox
>  
> +Recommended properies:
> + - syscon-otghs : phandle/offset pair. Phandle to the system control module and the
> +   register offset of the mailbox.
> +
>  SOC specific device node entry
>  usb_otg_hs: usb_otg_hs@4a0ab000 {
>  	compatible = "ti,omap4-musb";
> diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
> index 70f2b8a..a03cf1e 100644
> --- a/drivers/usb/musb/omap2430.c
> +++ b/drivers/usb/musb/omap2430.c
> @@ -39,16 +39,27 @@
>  #include <linux/usb/musb-omap.h>
>  #include <linux/phy/omap_control_phy.h>
>  #include <linux/of_platform.h>
> +#include <linux/regmap.h>
> +#include <linux/mfd/syscon.h>
>  
>  #include "musb_core.h"
>  #include "omap2430.h"
>  
> +#define OMAP2430_MUSB_MODE_MASK	0x1f
> +#define OMAP2430_MUSB_AVALID	BIT(0)
> +#define OMAP2430_MUSB_BVALID	BIT(1)
> +#define OMAP2430_MUSB_VBUSVALID	BIT(2)
> +#define OMAP2430_MUSB_SESSEND	BIT(3)
> +#define OMAP2430_MUSB_IDDIG	BIT(4)
> +
>  struct omap2430_glue {
>  	struct device		*dev;
>  	struct platform_device	*musb;
>  	enum omap_musb_vbus_id_status status;
>  	struct work_struct	omap_musb_mailbox_work;
>  	struct device		*control_otghs;
> +	struct regmap		*syscon_otghs; /* ctrl. reg. acces */
> +	unsigned int            otghs_reg; /* otghs reg. index within syscon */
>  };
>  #define glue_to_musb(g)		platform_get_drvdata(g->musb)
>  
> @@ -253,6 +264,44 @@ void omap_musb_mailbox(enum omap_musb_vbus_id_status status)
>  }
>  EXPORT_SYMBOL_GPL(omap_musb_mailbox);
>  
> +static void omap2430_musb_set_usbmode(struct omap2430_glue *glue,
> +				      enum omap_control_usb_mode mode)
> +{
> +	u32 val;
> +	int ret;
> +

	if (!glue->syscon_otghs) {
		omap_control_usb_set_mode(glue->control_otghs, mode);
		return;
	}

	switch (mode) {
	case USB_MODE_HOST:
		val = OMAP2430_MUSB_AVALID | OMAP2430_MUSB_VBUSVALID;
		break;
	case USB_MODE_DEVICE:
		val = OMAP2430_MUSB_IDDIG | OMAP2430_MUSB_AVALID |
			OMAP2430_MUSB_VBUSVALID;
		break;
	case USB_MODE_DISCONNECT:
		val = OMAP2430_MUSB_IDDIG | OMAP2430_MUSB_SESSEND;
		break;
	default:
		dev_dbg(glue->dev, "Invalid mode\n");
		dev_err(glue->dev, "Failed to set mode to %d\n", mode);
	}

	ret = regmap_update_bits(glue->syscon_otghs,
				 glue->otghs_reg,
				 OMAP2430_MUSB_MODE_MASK, val);
	if (ret < 0)
		dev_err(glue->dev, "Failed to update regmap\n");

other than that, looks fine.

-- 
balbi

Attachment: signature.asc
Description: Digital signature