Re: [PATCH v3 1/2] drivers: watchdog: add a driver to support SAMA5D4 watchdog timer
From: Lothar WaÃmann
Date: Wed Aug 05 2015 - 06:59:07 EST
Hi,
> From SAMA5D4, the watchdog timer is upgrated with a new feature,
> which is describled as in the datasheet, "WDT_MR can be written
> until a LOCKMR command is issued in WDT_CR".
> That is to say, as long as the bootstrap and u-boot don't issue
> a LOCKMR command, WDT_MR can be written more than once in the driver.
>
> So the SAMA5D4 watchdog driver's implementation is different from
> the at91sam9260 watchdog driver implemented in file at91sam9_wdt.c.
> The user application open the device file to enable the watchdog timer
> hardware, and close to disable it, and set the watchdog timer timeout
> by seting WDV and WDD fields of WDT_MR register, and ping the watchdog
> by issuing WDRSTT command to WDT_CR register with hard-coded key.
>
> Signed-off-by: Wenyou Yang <wenyou.yang@xxxxxxxxx>
> ---
> drivers/watchdog/Kconfig | 9 ++
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/at91_sama5d4_wdt.c | 279 +++++++++++++++++++++++++++++++++++
> drivers/watchdog/at91sam9_wdt.h | 2 +
> 4 files changed, 291 insertions(+)
> create mode 100644 drivers/watchdog/at91_sama5d4_wdt.c
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index e5e7c55..4ce8346 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -152,6 +152,15 @@ config ARM_SP805_WATCHDOG
> ARM Primecell SP805 Watchdog timer. This will reboot your system when
> the timeout is reached.
>
> +config AT91_SAMA5D4_WATCHDOG
> + tristate "Atmel SAMA5D4 Watchdog Timer"
> + depends on ARCH_AT91
> + select WATCHDOG_CORE
> + help
> + Atmel SAMA5D4 watchdog timer is embedded into SAMA5D4 chips.
> + Its Watchdog Timer Mode Register can be written more than once.
> + This will reboot your system when the timeout is reached.
> +
> config AT91RM9200_WATCHDOG
> tristate "AT91RM9200 watchdog"
> depends on SOC_AT91RM9200 && MFD_SYSCON
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 5c19294..c57569c 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -30,6 +30,7 @@ obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.o
>
> # ARM Architecture
> obj-$(CONFIG_ARM_SP805_WATCHDOG) += sp805_wdt.o
> +obj-$(CONFIG_AT91_SAMA5D4_WATCHDOG) += at91_sama5d4_wdt.o
consistency? Other AT91 entries don't have an '_' between 'AT91' and
the remainder of the Kconfig name.
> obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o
> obj-$(CONFIG_AT91SAM9X_WATCHDOG) += at91sam9_wdt.o
[...]
> +static irqreturn_t atmel_wdt_irq_handler(int irq, void *dev_id)
> +{
> + struct atmel_wdt *wdt = platform_get_drvdata(dev_id);
> +
> + if (wdt_read(wdt, AT91_WDT_SR)) {
> + pr_crit("Atmel Watchdog Software Reset\n");
> + emergency_restart();
> + pr_crit("Reboot didn't ?????\n");
>
Reboot didn't what? 'succeed' perhaps?
> +static const struct of_device_id atmel_wdt_of_match[] = {
> + { .compatible = "atmel,sama5d4-wdt", },
> + { },
The empty initializer must always be the last element of the array, so
there is no point in having a trailing ',' (whose purpose is to
facilitate adding more entries after the last one).
Without the comma there will be a compile error if (e.g. due to a
badly resolved merge conflict) an additional entry would be added after
the stop marker. With the comma after the stop marker any trailing
entries would silently be ignored.
Lothar WaÃmann
--
___________________________________________________________
Ka-Ro electronics GmbH | PascalstraÃe 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
GeschÃftsfÃhrer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996
www.karo-electronics.de | info@xxxxxxxxxxxxxxxxxxx
___________________________________________________________
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/