[PATCH v3] Add Mediatek thermal support

[Sascha Hauer]

This series adds support for the thermal sensors included in the
MT8173 SoC. Currently only basic temperature reading is supported
without any interrupt support.

The cpufreq driver for MT8173 is currently under review, so there's no
real cooling device available in mainline. Until this is available the
thermal driver can be tested with the following dts snippet. It creates
a fake gpio fan and a fake trip point which is so low that it can easily
be reached with a "cat /dev/zero > /dev/null" on the command line.

Please review and let me know what's missing to be included in mainline.

Changes since v2:
- sort #includes alphabetically
- Add prefix to register defines
- drop some members from struct mtk_thermal
- simplify raw_to_mcelsius()
- add and use more register bit defines
- use device_reset() instead of devm_reset_control_get()/reset_control_reset()
- misc other stuff

Changes since v1:
- Use "mediatek," prefix for custom properties
- Drop "thermal: consistently use int for temperatures" dependency

Sascha

	fan: gpio_fan {
		compatible = "gpio-fan";
		gpios = <&pio 24 0>;
		gpio-fan,speed-map = <0    0
				      4500 1>;
		#cooling-cells = <2>;
	};

	thermal-zones {
		cpu_thermal: cpu_thermal {
			polling-delay-passive = <1000>; /* milliseconds */
			polling-delay = <1000>; /* milliseconds */

			thermal-sensors = <&thermal 0>;

			trips {
				cpu_passive: cpu_passive {
					temperature = <47000>; /* millicelsius */
					hysteresis = <2000>; /* millicelsius */
					type = "passive";
				};

				cpu_crit {
					temperature = <90000>; /* millicelsius */
					hysteresis = <2000>; /* millicelsius */
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&cpu_passive>;
					cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};
	};

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/