Re: [PATCH 3/3] Input - elantech: Add special check for fw_version 0x470f01 touchpad

From: Dmitry Torokhov
Date: Wed Aug 05 2015 - 14:08:27 EST


Hi Ulrik,

On Sun, Aug 02, 2015 at 12:16:41PM +0800, duson wrote:
> It is no need to check the packet[0] for sanity check when doing
> elantech_packet_check_v4() function for fw_version = 0x470f01 touchpad.
>

Are you OK with this version?

Thanks!

> Signed-off by: Duson Lin <dusonlin@xxxxxxxxxx>
> ---
> drivers/input/mouse/elantech.c | 28 +++++++++++++++++++++++++---
> drivers/input/mouse/elantech.h | 1 +
> 2 files changed, 26 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
> index 22b9ca9..5bc3d55 100644
> --- a/drivers/input/mouse/elantech.c
> +++ b/drivers/input/mouse/elantech.c
> @@ -785,6 +785,9 @@ static int elantech_packet_check_v4(struct psmouse *psmouse)
> unsigned char packet_type = packet[3] & 0x03;
> bool sanity_check;
>
> + /* This represents the version of IC body. */
> + int ver = (etd->fw_version & 0x0f0000) >> 16;
> +
> if (etd->tp_dev && (packet[3] & 0x0f) == 0x06)
> return PACKET_TRACKPOINT;
>
> @@ -796,9 +799,17 @@ static int elantech_packet_check_v4(struct psmouse *psmouse)
> */
> if (etd->crc_enabled)
> sanity_check = ((packet[3] & 0x08) == 0x00);
> - else
> - sanity_check = ((packet[0] & 0x0c) == 0x04 &&
> - (packet[3] & 0x1c) == 0x10);
> + else {
> + /*
> + * The sanity check only need to check packet[3]
> + * when IC_body = 7 and PID = 0x2A
> + */
> + if (ver == 7 && etd->samples[1] == 0x2A)
> + sanity_check = ((packet[3] & 0x1c) == 0x10);
> + else
> + sanity_check = ((packet[0] & 0x0c) == 0x04 &&
> + (packet[3] & 0x1c) == 0x10);
> + }

I'd write this as:

if (etd->crc_enabled)
sanity_check = ((packet[3] & 0x08) == 0x00);
else if (ver == 7 && etd->samples[1] == 0x2A)
sanity_check = ((packet[3] & 0x1c) == 0x10);
else
sanity_check = ((packet[0] & 0x0c) == 0x04 &&
(packet[3] & 0x1c) == 0x10);

>
> if (!sanity_check)
> return PACKET_UNKNOWN;
> @@ -1116,6 +1127,7 @@ static int elantech_get_resolution_v4(struct psmouse *psmouse,
> * Avatar AVIU-145A2 0x361f00 ? clickpad
> * Fujitsu LIFEBOOK E544 0x470f00 d0, 12, 09 2 hw buttons
> * Fujitsu LIFEBOOK E554 0x570f01 40, 14, 0c 2 hw buttons
> + * Fujitsu T725 0x470f01 05, 12, 09 2 hw buttons
> * Fujitsu H730 0x570f00 c0, 14, 0c 3 hw buttons (**)
> * Gigabyte U2442 0x450f01 58, 17, 0c 2 hw buttons
> * Lenovo L430 0x350f02 b9, 15, 0c 2 hw buttons (*)
> @@ -1651,6 +1663,16 @@ int elantech_init(struct psmouse *psmouse)
> etd->capabilities[0], etd->capabilities[1],
> etd->capabilities[2]);
>
> + if (etd->hw_version != 1) {
> + if (etd->send_cmd(psmouse, ETP_SAMPLE_QUERY, etd->samples)) {
> + psmouse_err(psmouse, "failed to query sample data\n");
> + goto init_fail;
> + }
> + psmouse_info(psmouse,
> + "Elan sample query result %02x, %02x, %02x\n",
> + etd->samples[0], etd->samples[1], etd->samples[2]);
> + }
> +
> if (elantech_set_absolute_mode(psmouse)) {
> psmouse_err(psmouse,
> "failed to put touchpad into absolute mode.\n");
> diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h
> index f965d15..e1cbf40 100644
> --- a/drivers/input/mouse/elantech.h
> +++ b/drivers/input/mouse/elantech.h
> @@ -129,6 +129,7 @@ struct elantech_data {
> unsigned char reg_26;
> unsigned char debug;
> unsigned char capabilities[3];
> + unsigned char samples[3];
> bool paritycheck;
> bool jumpy_cursor;
> bool reports_pressure;
> --
>

Thanks.

--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/