[PATCH v2 00/22] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms
From: Roger Quadros
Date: Fri Aug 07 2015 - 05:25:36 EST
Hi,
We do a couple of things in this series which result in
cleaner device tree implementation, faster perfomance and
multi-platform support. As an added bonus we get new GPI/Interrupt pins
for use in the system.
- Establish a custom interface between NAND and GPMC driver. This is
needed because all of the NAND registers sit in the GPMC register space.
Some bits like NAND IRQ are even shared with GPMC.
- Remove NAND IRQ handling from omap-gpmc driver, share the GPMC IRQ
with the omap2-nand driver and handle NAND IRQ events in the NAND driver.
This causes performance increase when using prefetch-irq mode.
30% increase in read, 17% increase in write in prefetch-irq mode.
- Clean up device tree support so that omap-gpmc IP and the omap2 NAND
driver can be used on non-OMAP platforms. e.g. Keystone.
- Implement GPIOCHIP + IRQCHIP for the GPMC WAITPINS. SoCs can contain
2 to 4 of these and most of them would be unused otherwise. It also
allows a cleaner implementation of NAND Ready pin status for the NAND driver.
- Implement GPIOlib based NAND ready pin checking for OMAP NAND driver.
NOTE: I've only adapted dra7.dtsi and dra7x-evms for this series.
I will adapt all other boards when the series is in a shape to be accepted.
cheers,
-roger
This is done in patches 1 to 14
Roger Quadros (22):
ARM: OMAP2+: gpmc: Add platform data
ARM: OMAP2+: gpmc: Add gpmc timings and settings to platform data
memory: omap-gpmc: Introduce GPMC to NAND interface
mtd: nand: omap2: Use gpmc_omap_get_nand_ops() to get NAND registers
memory: omap-gpmc: Add GPMC-NAND ops to get writebufferempty status
mtd: nand: omap2: Switch to using GPMC-NAND ops for writebuffer empty
check
memory: omap-gpmc: Remove NAND IRQ code
memory: omap-gpmc: Add IRQ ops for GPMC-NAND interface
mtd: nand: omap2: manage NAND interrupts
mtd: nand: omap: Copy platform data parameters to omap_nand_info data
mtd: nand: omap: Clean up device tree support
mtd: nand: omap: Update DT binding documentation
memory: omap-gpmc: Prevent mapping into 1st 16MB
ARM: dts: OMAP2+: Fix NAND device nodes.
memory: omap-gpmc: Move device tree binding to correct location
memory: omap-gpmc: Support general purpose input for WAITPINs
memory: omap-gpmc: Reserve WAITPIN if needed for WAIT monitoring
memory: omap-gpmc: Add irqchip support to the gpiochip
ARM: dts: dra7: Enable gpio & interrupt controller for gpmc node
mtd: nand: omap2: Implement NAND ready using gpiolib
ARM: dts: dra7x-evm: Provide NAND ready pin
memory: omap-gpmc: Prevent GPMC_STATUS from being accessed via
gpmc_regs
.../omap-gpmc.txt} | 0
.../devicetree/bindings/mtd/gpmc-nand.txt | 16 +-
arch/arm/boot/dts/dra7-evm.dts | 6 +-
arch/arm/boot/dts/dra7.dtsi | 4 +
arch/arm/boot/dts/dra72-evm.dts | 2 +
arch/arm/boot/dts/omap3-beagle.dts | 3 +-
arch/arm/mach-omap2/gpmc-nand.c | 11 +-
drivers/memory/omap-gpmc.c | 610 ++++++++++++---------
drivers/mtd/nand/omap2.c | 261 ++++++---
include/linux/omap-gpmc.h | 172 ++----
include/linux/platform_data/gpmc-omap.h | 169 ++++++
include/linux/platform_data/mtd-nand-omap2.h | 12 +-
12 files changed, 782 insertions(+), 484 deletions(-)
rename Documentation/devicetree/bindings/{bus/ti-gpmc.txt => memory-controllers/omap-gpmc.txt} (100%)
create mode 100644 include/linux/platform_data/gpmc-omap.h
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/