Re: [PATCH v2 4/8] drm: rockchip/dp: add rockchip platform dp driver

[Thierry Reding]

On Sat, Aug 08, 2015 at 11:54:38AM +0800, Yakir Yang wrote:
[...]
>         edp: edp@ff970000 {
[...]
>                 hsync-active-high = <0>;
>                 vsync-active-high = <0>;
>                 interlaced = <0>;

These look like they should come from the display mode definition (EDID)
rather than device tree.

>                 samsung,color-space = <0>;
>                 samsung,dynamic-range = <0>;
>                 samsung,ycbcr-coeff = <0>;

I think these should also come from EDID, though I'm not sure if we
store this in internal data structures yet.

>                 samsung,color-depth = <1>;

This is probably drm_display_info.bpc.

>                 samsung,link-rate = <0x0a>;
>                 samsung,lane-count = <1>;

And these should really be derived from values in the DPCD and adjusted
(if necessary) during link training.

Why would you ever want to hard-code the above?

> >>+	dp->clk_24m = devm_clk_get(dev, "clk_dp_24m");
> >Same here, maybe "dp_24m".
> Like my previous reply. And actually as those two clocks all have
> a common prefix "SCLK" in rk3288 clock tree, I thinkt we can name
> them to "sclk_dp" & "sclk_dp_24m", is it okay ?

I don't think there's a need for these common prefixes. The names here
are identifiers in the context of the IP block, so any SoC-specific
prefixes are irrelevant. Also they do appear, in DT and in code, in the
context of clocks already, so "sclk_" or "clk_" is completely redundant
in these names.

Thierry

Attachment: signature.asc
Description: PGP signature