Re: [PATCH v4 1/6] mfd: da9150: Add support for Fuel-Gauge

[Lee Jones]

On Tue, 04 Aug 2015, Adam Thomson wrote:

> Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>
> ---
> 
> Changes in v4:
>  - Update compatible string of fuel-gauge to "dlg, da9150-fuel-gauge". Also
>    made similar change to driver name to keep things consistent.
> 
> Changes in v3:
>  - Use DEFINE_RES_IRQ_NAMED() helper for defining FG IRQ resource.
>  - Unwanted new line & comments removed.
>  - Remove gotos which can be replaced with straight forward return calls.
>  - Add enum for indexing MFD cells list, which is used to assign pdata for FG
>    sub-device.
>  - Remove use of function pointers for QIF related read/write functions as
>    currently only I2C supported, so call I2C functions directly.
>  - Fold fg.h contents into core.h.

Assuming these have all been taken care of:

Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>

> Changes in v2:
>  - Moved temp callback function prototype to be part of power fuel-gauge patch,
>    as requested by Lee Jones.
> 
>  drivers/mfd/da9150-core.c       | 156 ++++++++++++++++++++++++++++++++++++++--
>  include/linux/mfd/da9150/core.h |  19 ++++-
>  2 files changed, 167 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/mfd/da9150-core.c b/drivers/mfd/da9150-core.c
> index 94b9bbd..85ca4b5 100644
> --- a/drivers/mfd/da9150-core.c
> +++ b/drivers/mfd/da9150-core.c
> @@ -23,6 +23,77 @@
>  #include <linux/mfd/da9150/core.h>
>  #include <linux/mfd/da9150/registers.h>
> 
> +/* Raw device access, used for QIF */
> +static int da9150_i2c_read_device(struct i2c_client *client, u8 addr, int count,
> +				  u8 *buf)
> +{
> +	struct i2c_msg xfer;
> +	int ret;
> +
> +	/*
> +	 * Read is split into two transfers as device expects STOP/START rather
> +	 * than repeated start to carry out this kind of access.
> +	 */
> +
> +	/* Write address */
> +	xfer.addr = client->addr;
> +	xfer.flags = 0;
> +	xfer.len = 1;
> +	xfer.buf = &addr;
> +
> +	ret = i2c_transfer(client->adapter, &xfer, 1);
> +	if (ret != 1) {
> +		if (ret < 0)
> +			return ret;
> +		else
> +			return -EIO;
> +	}
> +
> +	/* Read data */
> +	xfer.addr = client->addr;
> +	xfer.flags = I2C_M_RD;
> +	xfer.len = count;
> +	xfer.buf = buf;
> +
> +	ret = i2c_transfer(client->adapter, &xfer, 1);
> +	if (ret == 1)
> +		return 0;
> +	else if (ret < 0)
> +		return ret;
> +	else
> +		return -EIO;
> +}
> +
> +static int da9150_i2c_write_device(struct i2c_client *client, u8 addr,
> +				   int count, const u8 *buf)
> +{
> +	struct i2c_msg xfer;
> +	u8 *reg_data;
> +	int ret;
> +
> +	reg_data = kzalloc(1 + count, GFP_KERNEL);
> +	if (!reg_data)
> +		return -ENOMEM;
> +
> +	reg_data[0] = addr;
> +	memcpy(&reg_data[1], buf, count);
> +
> +	/* Write address & data */
> +	xfer.addr = client->addr;
> +	xfer.flags = 0;
> +	xfer.len = 1 + count;
> +	xfer.buf = reg_data;
> +
> +	ret = i2c_transfer(client->adapter, &xfer, 1);
> +	kfree(reg_data);
> +	if (ret == 1)
> +		return 0;
> +	else if (ret < 0)
> +		return ret;
> +	else
> +		return -EIO;
> +}
> +
>  static bool da9150_volatile_reg(struct device *dev, unsigned int reg)
>  {
>  	switch (reg) {
> @@ -107,6 +178,28 @@ static const struct regmap_config da9150_regmap_config = {
>  	.volatile_reg = da9150_volatile_reg,
>  };
> 
> +void da9150_read_qif(struct da9150 *da9150, u8 addr, int count, u8 *buf)
> +{
> +	int ret;
> +
> +	ret = da9150_i2c_read_device(da9150->core_qif, addr, count, buf);
> +	if (ret < 0)
> +		dev_err(da9150->dev, "Failed to read from QIF 0x%x: %d\n",
> +			addr, ret);
> +}
> +EXPORT_SYMBOL_GPL(da9150_read_qif);
> +
> +void da9150_write_qif(struct da9150 *da9150, u8 addr, int count, const u8 *buf)
> +{
> +	int ret;
> +
> +	ret = da9150_i2c_write_device(da9150->core_qif, addr, count, buf);
> +	if (ret < 0)
> +		dev_err(da9150->dev, "Failed to write to QIF 0x%x: %d\n",
> +			addr, ret);
> +}
> +EXPORT_SYMBOL_GPL(da9150_write_qif);
> +
>  u8 da9150_reg_read(struct da9150 *da9150, u16 reg)
>  {
>  	int val, ret;
> @@ -297,19 +390,35 @@ static struct resource da9150_charger_resources[] = {
>  	},
>  };
> 
> +static struct resource da9150_fg_resources[] = {
> +	DEFINE_RES_IRQ_NAMED(DA9150_IRQ_FG, "FG"),
> +};
> +
> +enum da9150_dev_idx {
> +	DA9150_GPADC_IDX = 0,
> +	DA9150_CHARGER_IDX,
> +	DA9150_FG_IDX,
> +};
> +
>  static struct mfd_cell da9150_devs[] = {
> -	{
> +	[DA9150_GPADC_IDX] = {
>  		.name = "da9150-gpadc",
>  		.of_compatible = "dlg,da9150-gpadc",
>  		.resources = da9150_gpadc_resources,
>  		.num_resources = ARRAY_SIZE(da9150_gpadc_resources),
>  	},
> -	{
> +	[DA9150_CHARGER_IDX] = {
>  		.name = "da9150-charger",
>  		.of_compatible = "dlg,da9150-charger",
>  		.resources = da9150_charger_resources,
>  		.num_resources = ARRAY_SIZE(da9150_charger_resources),
>  	},
> +	[DA9150_FG_IDX] = {
> +		.name = "da9150-fuel-gauge",
> +		.of_compatible = "dlg,da9150-fuel-gauge",
> +		.resources = da9150_fg_resources,
> +		.num_resources = ARRAY_SIZE(da9150_fg_resources),
> +	},
>  };
> 
>  static int da9150_probe(struct i2c_client *client,
> @@ -317,6 +426,7 @@ static int da9150_probe(struct i2c_client *client,
>  {
>  	struct da9150 *da9150;
>  	struct da9150_pdata *pdata = dev_get_platdata(&client->dev);
> +	int qif_addr;
>  	int ret;
> 
>  	da9150 = devm_kzalloc(&client->dev, sizeof(*da9150), GFP_KERNEL);
> @@ -335,16 +445,41 @@ static int da9150_probe(struct i2c_client *client,
>  		return ret;
>  	}
> 
> -	da9150->irq_base = pdata ? pdata->irq_base : -1;
> +	/* Setup secondary I2C interface for QIF access */
> +	qif_addr = da9150_reg_read(da9150, DA9150_CORE2WIRE_CTRL_A);
> +	qif_addr = (qif_addr & DA9150_CORE_BASE_ADDR_MASK) >> 1;
> +	qif_addr |= DA9150_QIF_I2C_ADDR_LSB;
> +	da9150->core_qif = i2c_new_dummy(client->adapter, qif_addr);
> +	if (!da9150->core_qif) {
> +		dev_err(da9150->dev, "Failed to attach QIF client\n");
> +		return -ENODEV;
> +	}
> +
> +	i2c_set_clientdata(da9150->core_qif, da9150);
> +
> +	if (pdata) {
> +		da9150->irq_base = pdata->irq_base;
> +
> +		da9150_devs[DA9150_FG_IDX].platform_data = pdata->fg_pdata;
> +		da9150_devs[DA9150_FG_IDX].pdata_size =
> +			sizeof(struct da9150_fg_pdata);
> +	} else {
> +		da9150->irq_base = -1;
> +	}
> 
>  	ret = regmap_add_irq_chip(da9150->regmap, da9150->irq,
>  				  IRQF_TRIGGER_LOW | IRQF_ONESHOT,
>  				  da9150->irq_base, &da9150_regmap_irq_chip,
>  				  &da9150->regmap_irq_data);
> -	if (ret)
> -		return ret;
> +	if (ret) {
> +		dev_err(da9150->dev, "Failed to add regmap irq chip: %d\n",
> +			ret);
> +		goto regmap_irq_fail;
> +	}
> +
> 
>  	da9150->irq_base = regmap_irq_chip_get_base(da9150->regmap_irq_data);
> +
>  	enable_irq_wake(da9150->irq);
> 
>  	ret = mfd_add_devices(da9150->dev, -1, da9150_devs,
> @@ -352,11 +487,17 @@ static int da9150_probe(struct i2c_client *client,
>  			      da9150->irq_base, NULL);
>  	if (ret) {
>  		dev_err(da9150->dev, "Failed to add child devices: %d\n", ret);
> -		regmap_del_irq_chip(da9150->irq, da9150->regmap_irq_data);
> -		return ret;
> +		goto mfd_fail;
>  	}
> 
>  	return 0;
> +
> +mfd_fail:
> +	regmap_del_irq_chip(da9150->irq, da9150->regmap_irq_data);
> +regmap_irq_fail:
> +	i2c_unregister_device(da9150->core_qif);
> +
> +	return ret;
>  }
> 
>  static int da9150_remove(struct i2c_client *client)
> @@ -365,6 +506,7 @@ static int da9150_remove(struct i2c_client *client)
> 
>  	regmap_del_irq_chip(da9150->irq, da9150->regmap_irq_data);
>  	mfd_remove_devices(da9150->dev);
> +	i2c_unregister_device(da9150->core_qif);
> 
>  	return 0;
>  }
> diff --git a/include/linux/mfd/da9150/core.h b/include/linux/mfd/da9150/core.h
> index 76e6689..1bf50ca 100644
> --- a/include/linux/mfd/da9150/core.h
> +++ b/include/linux/mfd/da9150/core.h
> @@ -15,6 +15,7 @@
>  #define __DA9150_CORE_H
> 
>  #include <linux/device.h>
> +#include <linux/i2c.h>
>  #include <linux/interrupt.h>
>  #include <linux/regmap.h>
> 
> @@ -46,23 +47,39 @@
>  #define DA9150_IRQ_GPADC	19
>  #define DA9150_IRQ_WKUP		20
> 
> +/* I2C sub-device address */
> +#define DA9150_QIF_I2C_ADDR_LSB		0x5
> +
> +struct da9150_fg_pdata {
> +	u32 update_interval;	/* msecs */
> +	u8 warn_soc_lvl;	/* % value */
> +	u8 crit_soc_lvl;	/* % value */
> +};
> +
>  struct da9150_pdata {
>  	int irq_base;
> +	struct da9150_fg_pdata *fg_pdata;
>  };
> 
>  struct da9150 {
>  	struct device *dev;
>  	struct regmap *regmap;
> +	struct i2c_client *core_qif;
> +
>  	struct regmap_irq_chip_data *regmap_irq_data;
>  	int irq;
>  	int irq_base;
>  };
> 
> -/* Device I/O */
> +/* Device I/O - Query Interface for FG and standard register access */
> +void da9150_read_qif(struct da9150 *da9150, u8 addr, int count, u8 *buf);
> +void da9150_write_qif(struct da9150 *da9150, u8 addr, int count, const u8 *buf);
> +
>  u8 da9150_reg_read(struct da9150 *da9150, u16 reg);
>  void da9150_reg_write(struct da9150 *da9150, u16 reg, u8 val);
>  void da9150_set_bits(struct da9150 *da9150, u16 reg, u8 mask, u8 val);
> 
>  void da9150_bulk_read(struct da9150 *da9150, u16 reg, int count, u8 *buf);
>  void da9150_bulk_write(struct da9150 *da9150, u16 reg, int count, const u8 *buf);
> +
>  #endif /* __DA9150_CORE_H */

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/