Re: regression introduced by "block: Add support for DAX reads/writes to block devices"

[Linda Knippers]

On 8/10/2015 5:27 PM, Dave Chinner wrote:
> On Mon, Aug 10, 2015 at 12:32:08PM -0400, Linda Knippers wrote:
>> On 8/9/2015 4:52 AM, Boaz Harrosh wrote:
>>> On 08/06/2015 11:34 PM, Dave Chinner wrote:
>>>> On Thu, Aug 06, 2015 at 10:52:47AM +0300, Boaz Harrosh wrote:
>>>>> On 08/06/2015 06:24 AM, Dave Chinner wrote:
>>>>>> On Wed, Aug 05, 2015 at 09:42:54PM -0400, Linda Knippers wrote:
>>>>>>> On 08/05/2015 06:01 PM, Dave Chinner wrote:
>>>>>>>> On Wed, Aug 05, 2015 at 04:19:08PM -0400, Jeff Moyer wrote:
>>>>> <>
>>>>>>>>>
>>>>>>>>> I sat down with Linda to look into it, and the problem is that mkfs.xfs
>>>>>>>>> sets the blocksize of the device to 512 (via BLKBSZSET), and then reads
>>>>>>>>> from the last sector of the device.  This results in dax_io trying to do
>>>>>>>>> a page-sized I/O at 512 bytes from the end of the device.
>>>>>>>>
>>>>>
>>>>> This part I do not understand. how is mkfs.xfs reading the sector?
>>>>> Is it through open(/dev/pmem0,...) ? O_DIRECT?
>>>>
>>>> mkfs.xfs uses O_DIRECT. Only if open(O_DIRECT) fails or mkfs.xfs is
>>>> told that it is working on an image file does it fall back to
>>>> buffered IO. All of the XFS userspace tools work this way to prevent
>>>> page cache pollution issues with read-once or write-once data during
>>>> operation.
> ....
>> That patch does cause 'mkfs -t xfs' to work.
>>
>> Before:
>> $ sudo mkfs -t xfs -f /dev/pmem3
>> meta-data=/dev/pmem3             isize=256    agcount=4, agsize=524288 blks
>>          =                       sectsz=512   attr=2, projid32bit=1
>                                    ^^^^^^^^^^
> ....
> 
>> $ sudo mkfs -t xfs -f /dev/pmem3
>> meta-data=/dev/pmem3             isize=256    agcount=4, agsize=524288 blks
>>          =                       sectsz=4096  attr=2, projid32bit=1
>                                    ^^^^^^^^^^^
> 
> So in the after case, mkfs.xfs is behaving differently and not
> exercising the bug. It's seen the:
> 
>> $ cat /sys/block/pmem3/queue/logical_block_size
>> 512
>> $ cat /sys/block/pmem3/queue/physical_block_size
>> 4096
>   ^^^^
> 
> 4k physical block size, and hence configured the filesystem with a
> 4k sector size so all IO it issues is physicallly aligned. IOWs,
> mkfs.xfs's last sector read is 4k aligned and sized, and therefore
> the test has not confirmed that the patch fixes the 512 byte last
> sector read is fixed at all.

That is true.  All I reported is that mkfs.xfs now works.  I
had some questions about whether that was right.

The underlying problem is still there, as I can demonstrate with
a simple reproducer that just does what mkfs.xfs would have done
before.

> Isn't there a regression test suite that covers basic block device
> functionality that you can use to test these simple corner cases?

If there is, seems like DAX adds a few twists.

-- ljk
> 
> Cheers,
> 
> Dave.
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/