[PATCH v2 1/3] firmware: introduce sysfs driver for QEMU's fw_cfg device

[Gabriel L. Somlo]

From: "Gabriel Somlo" <somlo@xxxxxxx>

Make fw_cfg entries of type "file" available via sysfs. Entries
are listed under /sys/firmware/qemu_fw_cfg/by_key, in folders
named after each entry's selector key. Filename, selector value,
and size read-only attributes are included for each entry. Also,
a "raw" attribute allows retrieval of the full binary content of
each entry.

This patch also provides a documentation file outlining the
guest-side "hardware" interface exposed by the QEMU fw_cfg device.

Signed-off-by: Gabriel Somlo <somlo@xxxxxxx>
---
 .../ABI/testing/sysfs-firmware-qemu_fw_cfg         | 168 ++++++++
 drivers/firmware/Kconfig                           |  10 +
 drivers/firmware/Makefile                          |   1 +
 drivers/firmware/qemu_fw_cfg.c                     | 456 +++++++++++++++++++++
 4 files changed, 635 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg
 create mode 100644 drivers/firmware/qemu_fw_cfg.c

diff --git a/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg b/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg
new file mode 100644
index 0000000..5bc2e3f
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg
@@ -0,0 +1,168 @@
+What:		/sys/firmware/qemu_fw_cfg/
+Date:		August 2015
+Contact:	Gabriel Somlo <somlo@xxxxxxx>
+Description:
+		Several different architectures supported by QEMU (x86, arm,
+		sun4*, ppc/mac) are provisioned with a firmware configuration
+		(fw_cfg) device, used by the host to provide configuration data
+		to the starting guest. While most of this data is meant for use
+		by the guest BIOS, starting with QEMU v2.4, guest VMs may be
+		started with arbitrary fw_cfg entries supplied directly on the
+		command line, which therefore may be of interest to userspace.
+
+		=== Guest-side Hardware Interface ===
+
+		The fw_cfg device is available to guest VMs as a pair (control
+		and data) of registers, accessible as either a IO ports or as
+		MMIO addresses, depending on the architecture.
+
+		--- Control Register ---
+
+		Width: 16-bit
+		Access: Write-Only
+		Endianness: LE (if IOport) or BE (if MMIO)
+
+		A write to the control register selects the index for one of
+		the firmware configuration items (or "blobs") available on the
+		fw_cfg device, which can subsequently be read from the data
+		register.
+
+		Each time the control register is written, an data offset
+		internal to the fw_cfg device will be set to zero. This data
+		offset impacts which portion of the selected fw_cfg blob is
+		accessed by reading the data register, as explained below.
+
+		--- Data Register ---
+
+		Width: 8-bit (if IOport), or 8/16/32/64-bit (if MMIO)
+		Access: Read-Only
+		Endianness: string preserving
+
+		The data register allows access to an array of bytes which
+		represent the fw_cfg blob last selected by a write to the
+		control register.
+
+		Immediately following a write to the control register, the data
+		offset will be set to zero. Each successful read access to the
+		data register will increment the data offset by the appropriate
+		access width.
+
+		Each fw_cfg blob has a maximum associated data length. Once the
+		data offset exceeds this maximum length, any subsequent reads
+		via the data register will return 0x00.
+
+		An N-byte wide read of the data register will return the next
+		available N bytes of the selected fw_cfg blob, as a substring,
+		in increasing address order, similar to memcpy(), zero-padded
+		if necessary should the maximum data length of the selected
+		item be reached, as described above.
+
+		--- Per-arch Register Details ---
+
+		-------------------------------------------------------------
+		arch	access	       base	ctrl	ctrl	data	data
+			mode	    address	offset	endian	offset	width
+									max.
+		-------------------------------------------------------------
+		x86	IOport	      0x510	0	LE	1	 8
+		x86_64	IOport	      0x510	0	LE	1	 8
+		arm	MMIO	  0x9020000	8	BE	0	64
+		sun4u	IOport	      0x510	0	LE	1	 8
+		sun4m	MMIO	0xd00000510	0	BE	2	 8
+		ppc/mac	MMIO	 0xf0000510	0	BE	2	 8
+		-------------------------------------------------------------
+
+		NOTE: On platforms where the fw_cfg registers are exposed as
+		IO ports, the data port number will always be one greater than
+		the port number of the control register. I.e., the two ports
+		are overlapping, and can not be mapped separately.
+
+		=== Firmware Configuration Items of Interest ===
+
+		Originally, the index key, size, and formatting of blobs in
+		fw_cfg was hard coded by mutual agreement between QEMU on the
+		host side, and the BIOS running on the guest. Later on, a file
+		transfer interface was added: by reading a special blob, the
+		fw_cfg consumer can retrieve a list of records containing the
+		name, selector key, and size of further fw_cfg blobs made
+		available by the host. Below we describe three fw_cfg blobs
+		of interest to the sysfs driver.
+
+		--- Signature (Key 0x0000, FW_CFG_SIGNATURE) ---
+
+		The presence of the fw_cfg device can be verified by selecting
+		the signature blob by writing 0x0000 to the control register,
+		and reading four bytes from the data register. If the fw_cfg
+		device is present, the four bytes read will match the ASCII
+		characters "QEMU".
+
+		--- Revision (Key 0x0001, FW_CFG_ID) ---
+
+		A 32-bit little-endian unsigned integer, this item is used as
+		an interface revision number.
+
+		--- File Directory (Key 0x0019, FW_CFG_FILE_DIR) ---
+
+		Any fw_cfg blobs stored at key 0x0020 FW_CFG_FILE_FIRST() or
+		higher will have an associated entry in this "directory" blob,
+		which facilitates the discovery of available items by software
+		(e.g. BIOS) running on the guest. The format of the directory
+		blob is shown below.
+
+		NOTE: All integers are stored in big-endian format!
+
+		/* the entire file directory "blob" */
+		struct FWCfgFiles {
+			u32 count;		/* total number of entries */
+			struct FWCfgFile f[];	/* entry array, see below */
+		};
+
+		/* an individual directory entry, 64 bytes total */
+		struct FWCfgFile {
+			u32 size;	/* size of referenced blob */
+			u16 select;	/* selector key for referenced blob */
+			u16 reserved;
+			char name[56];	/* blob name, nul-terminated ASCII */
+		};
+
+		=== SysFS fw_cfg Interface ===
+
+		The fw_cfg sysfs interface described in this document is only
+		intended to display discoverable blobs (i.e., those registered
+		with the file directory), as there is no way to determine the
+		presence or size of "legacy" blobs (with selector keys between
+		0x0002 and 0x0018) programmatically.
+
+		All fw_cfg information is shown under:
+
+			/sys/firmware/qemu_fw_cfg/
+
+		The only legacy blob displayed is the fw_cfg device revision:
+
+			/sys/firmware/qemu_fw_cfg/rev
+
+		--- Discoverable fw_cfg blobs by selector key ---
+
+		All discoverable blobs listed in the fw_cfg file directory are
+		displayed as entries named after their unique selector key
+		value, e.g.:
+
+			/sys/firmware/qemu_fw_cfg/by_key/32
+			/sys/firmware/qemu_fw_cfg/by_key/33
+			/sys/firmware/qemu_fw_cfg/by_key/34
+			...
+
+		Each such fw_cfg sysfs entry has the following values exported
+		as attributes:
+
+		name  	: The 56-byte nul-terminated ASCII string used as the
+			  blob's 'file name' in the fw_cfg directory.
+		size  	: The length of the blob, as given in the fw_cfg
+			  directory.
+		key	: The value of the blob's selector key as given in the
+			  fw_cfg directory. This value is the same as used in
+			  the parent directory name.
+		raw	: The raw bytes of the blob, obtained by selecting the
+			  entry via the control register, and reading a number
+			  of bytes equal to the blob size from the data
+			  register.
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 99c69a3..f5cbe81 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -136,6 +136,16 @@ config QCOM_SCM
 	bool
 	depends on ARM || ARM64
 
+config FW_CFG_SYSFS
+	tristate "QEMU fw_cfg device support in sysfs"
+	depends on SYSFS
+	default n
+	help
+	  Say Y or M here to enable the exporting of the QEMU firmware
+	  configuration (fw_cfg) file entries via sysfs. Entries are
+	  found under /sys/firmware/fw_cfg when this option is enabled
+	  and loaded.
+
 source "drivers/firmware/broadcom/Kconfig"
 source "drivers/firmware/google/Kconfig"
 source "drivers/firmware/efi/Kconfig"
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 4a4b897..706fdc5 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_ISCSI_IBFT)	+= iscsi_ibft.o
 obj-$(CONFIG_FIRMWARE_MEMMAP)	+= memmap.o
 obj-$(CONFIG_QCOM_SCM)		+= qcom_scm.o
 obj-$(CONFIG_QCOM_SCM)		+= qcom_scm-32.o
+obj-$(CONFIG_FW_CFG_SYSFS)	+= qemu_fw_cfg.o
 CFLAGS_qcom_scm-32.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
 
 obj-y				+= broadcom/
diff --git a/drivers/firmware/qemu_fw_cfg.c b/drivers/firmware/qemu_fw_cfg.c
new file mode 100644
index 0000000..cd26eee
--- /dev/null
+++ b/drivers/firmware/qemu_fw_cfg.c
@@ -0,0 +1,456 @@
+/*
+ * drivers/firmware/qemu_fw_cfg.c
+ *
+ * Expose entries from QEMU's firmware configuration (fw_cfg) device in
+ * sysfs (read-only, under "/sys/firmware/qemu_fw_cfg/...").
+ *
+ * Copyright 2015 Carnegie Mellon University
+ */
+
+#include <linux/module.h>
+#include <linux/capability.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/ctype.h>
+
+/* selector key values for "well-known" fw_cfg entries */
+#define FW_CFG_SIGNATURE  0x00
+#define FW_CFG_ID         0x01
+#define FW_CFG_FILE_DIR   0x19
+
+/* size in bytes of fw_cfg signature */
+#define FW_CFG_SIG_SIZE 4
+
+/* fw_cfg "file name" is up to 56 characters (including terminating nul) */
+#define FW_CFG_MAX_FILE_PATH 56
+
+/* fw_cfg file directory entry type */
+struct fw_cfg_file {
+	u32 size;
+	u16 select;
+	u16 reserved;
+	char name[FW_CFG_MAX_FILE_PATH];
+};
+
+/* fw_cfg device i/o access options type */
+struct fw_cfg_access {
+	const char *name;
+	phys_addr_t base;
+	u8 size;
+	u8 ctrl_offset;
+	u8 data_offset;
+	bool is_mmio;
+};
+
+/* table of fw_cfg device i/o access options for known architectures */
+static struct fw_cfg_access fw_cfg_modes[] = {
+	{
+		.name = "fw_cfg IOport on i386, sun4u",
+		.base = 0x510,
+		.size = 0x02,
+		.ctrl_offset = 0x00,
+		.data_offset = 0x01,
+		.is_mmio = false,
+	}, {
+		.name = "fw_cfg MMIO on arm",
+		.base = 0x9020000,
+		.size = 0x0a,
+		.ctrl_offset = 0x08,
+		.data_offset = 0x00,
+		.is_mmio = true,
+	}, {
+		.name = "fw_cfg MMIO on sun4m",
+		.base = 0xd00000510,
+		.size = 0x03,
+		.ctrl_offset = 0x00,
+		.data_offset = 0x02,
+		.is_mmio = true,
+	}, {
+		.name = "fw_cfg MMIO on ppc/mac",
+		.base = 0xf0000510,
+		.size = 0x03,
+		.ctrl_offset = 0x00,
+		.data_offset = 0x02,
+		.is_mmio = true,
+	}, { } /* END */
+};
+
+/* fw_cfg device i/o currently selected option set */
+static struct fw_cfg_access *fw_cfg_mode;
+
+/* fw_cfg device i/o register addresses */
+static void __iomem *fw_cfg_dev_base;
+static void __iomem *fw_cfg_dev_ctrl;
+static void __iomem *fw_cfg_dev_data;
+
+/* atomic access to fw_cfg device (potentially slow i/o, so using mutex) */
+static DEFINE_MUTEX(fw_cfg_dev_lock);
+
+/* pick apropriate endianness for selector key */
+static inline u16 fw_cfg_sel_endianness(u16 key)
+{
+	return fw_cfg_mode->is_mmio ? cpu_to_be16(key) : cpu_to_le16(key);
+}
+
+/* type for fw_cfg "directory scan" visitor/callback function */
+typedef int (*fw_cfg_file_callback)(const struct fw_cfg_file *f);
+
+/* run a given callback on each fw_cfg directory entry */
+static int fw_cfg_scan_dir(fw_cfg_file_callback callback)
+{
+	int ret = 0;
+	u32 count, i;
+	struct fw_cfg_file f;
+
+	mutex_lock(&fw_cfg_dev_lock);
+	iowrite16(fw_cfg_sel_endianness(FW_CFG_FILE_DIR), fw_cfg_dev_ctrl);
+	ioread8_rep(fw_cfg_dev_data, &count, sizeof(count));
+	for (i = 0; i < be32_to_cpu(count); i++) {
+		ioread8_rep(fw_cfg_dev_data, &f, sizeof(f));
+		ret = callback(&f);
+		if (ret)
+			break;
+	}
+	mutex_unlock(&fw_cfg_dev_lock);
+	return ret;
+}
+
+/* read chunk of given fw_cfg blob (caller responsible for sanity-check) */
+static inline void fw_cfg_read_blob(u16 key,
+				    void *buf, loff_t pos, size_t count)
+{
+	mutex_lock(&fw_cfg_dev_lock);
+	iowrite16(fw_cfg_sel_endianness(key), fw_cfg_dev_ctrl);
+	while (pos-- > 0)
+		ioread8(fw_cfg_dev_data);
+	ioread8_rep(fw_cfg_dev_data, buf, count);
+	mutex_unlock(&fw_cfg_dev_lock);
+}
+
+/* clean up fw_cfg device i/o setup */
+static void fw_cfg_io_cleanup(void)
+{
+	if (fw_cfg_mode->is_mmio) {
+		iounmap(fw_cfg_dev_base);
+		release_mem_region(fw_cfg_mode->base, fw_cfg_mode->size);
+	} else {
+		ioport_unmap(fw_cfg_dev_base);
+		release_region(fw_cfg_mode->base, fw_cfg_mode->size);
+	}
+}
+
+/* probe and map fw_cfg device */
+static int __init fw_cfg_io_probe(void)
+{
+	char sig[FW_CFG_SIG_SIZE];
+
+	for (fw_cfg_mode = &fw_cfg_modes[0];
+	     fw_cfg_mode->base; fw_cfg_mode++) {
+
+		phys_addr_t base = fw_cfg_mode->base;
+		u8 size = fw_cfg_mode->size;
+
+		/* reserve and map mmio or ioport region */
+		if (fw_cfg_mode->is_mmio) {
+			if (!request_mem_region(base, size, fw_cfg_mode->name))
+				continue;
+			fw_cfg_dev_base = ioremap(base, size);
+			if (!fw_cfg_dev_base) {
+				release_mem_region(base, size);
+				continue;
+			}
+		} else {
+			if (!request_region(base, size, fw_cfg_mode->name))
+				continue;
+			fw_cfg_dev_base = ioport_map(base, size);
+			if (!fw_cfg_dev_base) {
+				release_region(base, size);
+				continue;
+			}
+		}
+
+		/* set control and data register addresses */
+		fw_cfg_dev_ctrl = fw_cfg_dev_base + fw_cfg_mode->ctrl_offset;
+		fw_cfg_dev_data = fw_cfg_dev_base + fw_cfg_mode->data_offset;
+
+		/* verify fw_cfg device signature */
+		fw_cfg_read_blob(FW_CFG_SIGNATURE, sig, 0, FW_CFG_SIG_SIZE);
+		if (memcmp(sig, "QEMU", FW_CFG_SIG_SIZE) == 0)
+			/* success, we're done */
+			return 0;
+
+		/* clean up before probing next access mode */
+		fw_cfg_io_cleanup();
+	}
+
+	return -ENODEV;
+}
+
+/* fw_cfg revision attribute, in /sys/firmware/qemu_fw_cfg top-level dir. */
+static u32 fw_cfg_rev;
+
+static ssize_t fw_cfg_showrev(struct kobject *k, struct attribute *a, char *buf)
+{
+	return sprintf(buf, "%u\n", fw_cfg_rev);
+}
+
+static const struct {
+	struct attribute attr;
+	ssize_t (*show)(struct kobject *k, struct attribute *a, char *buf);
+} fw_cfg_rev_attr = {
+	.attr = { .name = "rev", .mode = S_IRUSR },
+	.show = fw_cfg_showrev,
+};
+
+/* fw_cfg_sysfs_entry type */
+struct fw_cfg_sysfs_entry {
+	struct kobject kobj;
+	struct fw_cfg_file f;
+	struct list_head list;
+};
+
+/* get fw_cfg_sysfs_entry from kobject member */
+static inline struct fw_cfg_sysfs_entry *to_entry(struct kobject *kobj)
+{
+	return container_of(kobj, struct fw_cfg_sysfs_entry, kobj);
+}
+
+/* fw_cfg_sysfs_attribute type */
+struct fw_cfg_sysfs_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct fw_cfg_sysfs_entry *entry, char *buf);
+};
+
+/* get fw_cfg_sysfs_attribute from attribute member */
+static inline struct fw_cfg_sysfs_attribute *to_attr(struct attribute *attr)
+{
+	return container_of(attr, struct fw_cfg_sysfs_attribute, attr);
+}
+
+/* global cache of fw_cfg_sysfs_entry objects */
+static LIST_HEAD(fw_cfg_entry_cache);
+
+/* kobjects removed lazily by kernel, mutual exclusion needed */
+static DEFINE_SPINLOCK(fw_cfg_cache_lock);
+
+static inline void fw_cfg_sysfs_cache_enlist(struct fw_cfg_sysfs_entry *entry)
+{
+	spin_lock(&fw_cfg_cache_lock);
+	list_add_tail(&entry->list, &fw_cfg_entry_cache);
+	spin_unlock(&fw_cfg_cache_lock);
+}
+
+static inline void fw_cfg_sysfs_cache_delist(struct fw_cfg_sysfs_entry *entry)
+{
+	spin_lock(&fw_cfg_cache_lock);
+	list_del(&entry->list);
+	spin_unlock(&fw_cfg_cache_lock);
+}
+
+static void fw_cfg_sysfs_cache_cleanup(void)
+{
+	struct fw_cfg_sysfs_entry *entry, *next;
+
+	list_for_each_entry_safe(entry, next, &fw_cfg_entry_cache, list) {
+		/* will end up invoking fw_cfg_sysfs_cache_delist()
+		 * via each object's release() method (i.e. destructor) */
+		kobject_put(&entry->kobj);
+	}
+}
+
+/* default_attrs: per-entry attributes and show methods */
+
+#define FW_CFG_SYSFS_ATTR(_attr) \
+struct fw_cfg_sysfs_attribute fw_cfg_sysfs_attr_##_attr = { \
+	.attr = { .name = __stringify(_attr), .mode = S_IRUSR }, \
+	.show = fw_cfg_sysfs_show_##_attr, \
+}
+
+static ssize_t fw_cfg_sysfs_show_size(struct fw_cfg_sysfs_entry *e, char *buf)
+{
+	return sprintf(buf, "%u\n", e->f.size);
+}
+
+static ssize_t fw_cfg_sysfs_show_key(struct fw_cfg_sysfs_entry *e, char *buf)
+{
+	return sprintf(buf, "%u\n", e->f.select);
+}
+
+static ssize_t fw_cfg_sysfs_show_name(struct fw_cfg_sysfs_entry *e, char *buf)
+{
+	return sprintf(buf, "%s\n", e->f.name);
+}
+
+static FW_CFG_SYSFS_ATTR(size);
+static FW_CFG_SYSFS_ATTR(key);
+static FW_CFG_SYSFS_ATTR(name);
+
+static struct attribute *fw_cfg_sysfs_entry_attrs[] = {
+	&fw_cfg_sysfs_attr_size.attr,
+	&fw_cfg_sysfs_attr_key.attr,
+	&fw_cfg_sysfs_attr_name.attr,
+	NULL,
+};
+
+/* sysfs_ops: find fw_cfg_[entry, attribute] and call appropriate show method */
+static ssize_t fw_cfg_sysfs_attr_show(struct kobject *kobj, struct attribute *a,
+				      char *buf)
+{
+	struct fw_cfg_sysfs_entry *entry = to_entry(kobj);
+	struct fw_cfg_sysfs_attribute *attr = to_attr(a);
+
+	return attr->show(entry, buf);
+}
+
+static const struct sysfs_ops fw_cfg_sysfs_attr_ops = {
+	.show = fw_cfg_sysfs_attr_show,
+};
+
+/* release: destructor, to be called via kobject_put() */
+static void fw_cfg_sysfs_release_entry(struct kobject *kobj)
+{
+	struct fw_cfg_sysfs_entry *entry = to_entry(kobj);
+
+	fw_cfg_sysfs_cache_delist(entry);
+	kfree(entry);
+}
+
+/* kobj_type: ties together all properties required to register an entry */
+static struct kobj_type fw_cfg_sysfs_entry_ktype = {
+	.default_attrs = fw_cfg_sysfs_entry_attrs,
+	.sysfs_ops = &fw_cfg_sysfs_attr_ops,
+	.release = fw_cfg_sysfs_release_entry,
+};
+
+/* raw-read method and attribute */
+static ssize_t fw_cfg_sysfs_read_raw(struct file *filp, struct kobject *kobj,
+				     struct bin_attribute *bin_attr,
+				     char *buf, loff_t pos, size_t count)
+{
+	struct fw_cfg_sysfs_entry *entry = to_entry(kobj);
+
+	if (pos > entry->f.size)
+		return -EINVAL;
+
+	if (count > entry->f.size - pos)
+		count = entry->f.size - pos;
+
+	fw_cfg_read_blob(entry->f.select, buf, pos, count);
+	return count;
+}
+
+static struct bin_attribute fw_cfg_sysfs_attr_raw = {
+	.attr = { .name = "raw", .mode = 0400 },
+	.read = fw_cfg_sysfs_read_raw,
+};
+
+/* kobjects & kset representing top-level, by_key, and by_name folders */
+static struct kobject *fw_cfg_top_ko;
+static struct kobject *fw_cfg_sel_ko;
+
+/* callback function to register an individual fw_cfg file */
+static int __init fw_cfg_register_file(const struct fw_cfg_file *f)
+{
+	int err;
+	struct fw_cfg_sysfs_entry *entry;
+
+	/* allocate new entry */
+	entry = kzalloc(sizeof(*entry), GFP_KERNEL);
+	if (!entry)
+		return -ENOMEM;
+
+	/* set file entry information */
+	entry->f.size = be32_to_cpu(f->size);
+	entry->f.select = be16_to_cpu(f->select);
+	strcpy(entry->f.name, f->name);
+
+	/* register entry under "/sys/firmware/qemu_fw_cfg/by_key/" */
+	err = kobject_init_and_add(&entry->kobj, &fw_cfg_sysfs_entry_ktype,
+				   fw_cfg_sel_ko, "%d", entry->f.select);
+	if (err)
+		goto err_register;
+
+	/* add raw binary content access */
+	err = sysfs_create_bin_file(&entry->kobj, &fw_cfg_sysfs_attr_raw);
+	if (err)
+		goto err_add_raw;
+
+	/* success, add entry to global cache */
+	fw_cfg_sysfs_cache_enlist(entry);
+	return 0;
+
+err_add_raw:
+	kobject_del(&entry->kobj);
+err_register:
+	kfree(entry);
+	return err;
+}
+
+/* unregister top-level or by_key folder */
+static inline void fw_cfg_kobj_cleanup(struct kobject *kobj)
+{
+	kobject_del(kobj);
+	kobject_put(kobj);
+}
+
+static int __init fw_cfg_sysfs_init(void)
+{
+	int err;
+
+	/* probe for the fw_cfg "hardware" */
+	err = fw_cfg_io_probe();
+	if (err)
+		return err;
+
+	/* create /sys/firmware/qemu_fw_cfg/ and its subdirectories */
+	err = -ENOMEM;
+	fw_cfg_top_ko = kobject_create_and_add("qemu_fw_cfg", firmware_kobj);
+	if (!fw_cfg_top_ko)
+		goto err_top;
+	fw_cfg_sel_ko = kobject_create_and_add("by_key", fw_cfg_top_ko);
+	if (!fw_cfg_sel_ko)
+		goto err_sel;
+
+	/* get revision number, add matching top-level attribute */
+	fw_cfg_read_blob(FW_CFG_ID, &fw_cfg_rev, 0, sizeof(fw_cfg_rev));
+	fw_cfg_rev = le32_to_cpu(fw_cfg_rev);
+	err = sysfs_create_file(fw_cfg_top_ko, &fw_cfg_rev_attr.attr);
+	if (err)
+		goto err_rev;
+
+	/* process fw_cfg file directory entry, registering each file */
+	err = fw_cfg_scan_dir(fw_cfg_register_file);
+	if (err)
+		goto err_scan;
+
+	/* success */
+	pr_debug("fw_cfg: loaded.\n");
+	return 0;
+
+err_scan:
+	fw_cfg_sysfs_cache_cleanup();
+	sysfs_remove_file(fw_cfg_top_ko, &fw_cfg_rev_attr.attr);
+err_rev:
+	fw_cfg_kobj_cleanup(fw_cfg_sel_ko);
+err_sel:
+	fw_cfg_kobj_cleanup(fw_cfg_top_ko);
+err_top:
+	fw_cfg_io_cleanup();
+	return err;
+}
+
+static void __exit fw_cfg_sysfs_exit(void)
+{
+	pr_debug("fw_cfg: unloading.\n");
+	fw_cfg_sysfs_cache_cleanup();
+	fw_cfg_kobj_cleanup(fw_cfg_sel_ko);
+	fw_cfg_kobj_cleanup(fw_cfg_top_ko);
+	fw_cfg_io_cleanup();
+}
+
+module_init(fw_cfg_sysfs_init);
+module_exit(fw_cfg_sysfs_exit);
+MODULE_AUTHOR("Gabriel L. Somlo <somlo@xxxxxxx>");
+MODULE_DESCRIPTION("QEMU fw_cfg sysfs support");
+MODULE_LICENSE("GPL");
-- 
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/