[PATCH v3 1/3] devicetree: bindings: rtc: add bindings for xilinx zynqmp rtc

[Suneel Garapati]

adds file for description on device node bindings for RTC
found on Xilinx Zynq Ultrascale+ MPSoC.

Signed-off-by: Suneel Garapati <suneel.garapati@xxxxxxxxxx>
---
Changes v3
- none
Changes v2 
- add examples for interrupt-names 
- change alm to alarm 
---
 Documentation/devicetree/bindings/rtc/xlnx-rtc.txt | 25 ++++++++++++++++++++++
 1 file changed, 25 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/rtc/xlnx-rtc.txt

diff --git a/Documentation/devicetree/bindings/rtc/xlnx-rtc.txt b/Documentation/devicetree/bindings/rtc/xlnx-rtc.txt
new file mode 100644
index 0000000..0df6f01
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/xlnx-rtc.txt
@@ -0,0 +1,25 @@
+* Xilinx Zynq Ultrascale+ MPSoC Real Time Clock
+
+RTC controller for the Xilinx Zynq MPSoC Real Time Clock
+Separate IRQ lines for seconds and alarm
+
+Required properties:
+- compatible: Should be "xlnx,zynqmp-rtc"
+- reg: Physical base address of the controller and length
+       of memory mapped region.
+- interrupts: IRQ lines for the RTC.
+- interrupt-names: interrupt line names eg. "sec" "alarm"
+
+Optional:
+- calibration: calibration value for 1 sec period which will
+		be programmed directly to calibration register
+
+Example:
+rtc: rtc@ffa60000 {
+	compatible = "xlnx,zynqmp-rtc";
+	reg = <0x0 0xffa60000 0x100>;
+	interrupt-parent = <&gic>;
+	interrupts = <0 26 4>, <0 27 4>;
+	interrupt-names = "alarm", "sec";
+	calibration = <0x198233>;
+};
-- 
2.1.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/