Thanks Shawn. Please help to check the below in the mmc_blk_rw_rq_prep:
if (do_rel_wr)
mmc_apply_rel_rw(brq, card, req);
I think we need to set the do_rel_wr to false( at the beginning of this function) if the card does not support the CMD23. The above code is executed before the "if ((md->flags & MMC_BLK_CMD23)" code.
Thanks,
Yong Li
----------------------------------------
Subject: Re: [PATCH] mmc: block: disable the reliable write If the card does not support CMD23NïïïïïrïïyïïïbïXïïÇvï^ï)Þ{.nï+ïïïï{ïïg"ïï^nïrïïïzïïïhïïïï&ïïïGïïïhï(ïéïÝj"ïïïmïïïïïzïÞïïïfïïïhïïï~ïmml==
To: sdliyong@xxxxxxxxx; chris@xxxxxxxxxx; ulf.hansson@xxxxxxxxxx; linux-mmc@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
CC: shawn.lin@xxxxxxxxxxxxxx
From: shawn.lin@xxxxxxxxxxxxxx
Date: Fri, 14 Aug 2015 16:13:02 +0800
å 2015/8/14 15:30, sdliyong@xxxxxxxxx åé:
From: Yong Li <sdliyong@xxxxxxxxx>
Signed-off-by: Yong Li <sdliyong@xxxxxxxxx>
---
drivers/mmc/card/block.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 452782b..d9e3c45 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -1366,7 +1366,8 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
bool do_rel_wr = ((req->cmd_flags & REQ_FUA) ||
(req->cmd_flags & REQ_META)) &&
(rq_data_dir(req) == WRITE) &&
- (md->flags & MMC_BLK_REL_WR);
+ (md->flags & MMC_BLK_REL_WR) &&
+ !(card->quirks & MMC_QUIRK_BLK_NO_CMD23);
Hi Yong,
pls check that code below.
MMC_BLK_REL_WR will not be enabled if we know this card CANNOT support
CMD23 form SCR. ANDï "card->quirks & MMC_QUIRK_BLK_NO_CMD23" would be
checked here as well. So I think your code is unnecessary.
if ((md->flags & MMC_BLK_CMD23) && mmc_op_multi(brq->cmd.opcode) &&
(do_rel_wr || !(card->quirks & MMC_QUIRK_BLK_NO_CMD23) ||
do_data_tag)) {
brq->sbc.opcode = MMC_SET_BLOCK_COUNT;
brq->sbc.arg = brq->data.blocks |
(do_rel_wr ? (1 << 31) : 0) |
(do_data_tag ? (1 << 29) : 0);
brq->sbc.flags = MMC_RSP_R1 | MMC_CMD_AC;
brq->mrq.sbc = &brq->sbc;
}
Thanks.
Shawn
memset(brq, 0, sizeof(struct mmc_blk_request));
brq->mrq.cmd = &brq->cmd;
--
Shawn Lin