Re: [PATCH] drm: panel: simple: add QiaoDian qd43003c0-40
From: Thierry Reding
Date: Mon Aug 17 2015 - 06:10:42 EST
On Sat, Aug 01, 2015 at 12:44:31AM +0200, Alexandre Belloni wrote:
> From: Josh Wu <josh.wu@xxxxxxxxx>
>
> The QiaoDian Xianshi QD43003C0-40 is a 4"3 TFT LCD panel.
>
> Timings from the OTA5180A document, ver 0.9, section
> 10.1.1:
> http://www.orientdisplay.com/pdf/OTA5180A.pdf
>
> Signed-off-by: Josh Wu <josh.wu@xxxxxxxxx>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
> ---
> .../devicetree/bindings/panel/qd,qd43003c0-40.txt | 7 ++++++
> drivers/gpu/drm/panel/panel-simple.c | 26 ++++++++++++++++++++++
> 2 files changed, 33 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/panel/qd,qd43003c0-40.txt
You didn't run this through scripts/get_maintainer.pl, did you? It would
also help to use the standard prefix ("drm/panel: ") because I end up
filtering for that occasionally in case somebody didn't Cc me on panel
patches.
I only came across this by accident, and it's going to miss 4.3 now.
Also two comments below...
> diff --git a/Documentation/devicetree/bindings/panel/qd,qd43003c0-40.txt b/Documentation/devicetree/bindings/panel/qd,qd43003c0-40.txt
> new file mode 100644
> index 000000000000..900bc6ebeaff
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/panel/qd,qd43003c0-40.txt
> @@ -0,0 +1,7 @@
> +QiaoDian XianShi Corporation 4"3 TFT LCD panel
> +
> +Required properties:
> +- compatible: should be "qd,qd43003c0-40"
> +
> +This binding is compatible with the simple-panel binding, which is specified
> +in simple-panel.txt in this directory.
I don't see a vendor prefix for QiaoDian XianShi Corporation in
Documentation/devicetree/bindings/vendor-prefixes.txt.
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index f94201b6e882..e688fa545ae3 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -967,6 +967,29 @@ static const struct panel_desc ortustech_com43h4m85ulc = {
> .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
> };
>
> +static const struct drm_display_mode qd43003c0_40_mode = {
> + .clock = 9000,
> + .hdisplay = 480,
> + .hsync_start = 480 + 8,
> + .hsync_end = 480 + 8 + 4,
> + .htotal = 480 + 8 + 4 + 39,
> + .vdisplay = 272,
> + .vsync_start = 272 + 4,
> + .vsync_end = 272 + 4 + 10,
> + .vtotal = 272 + 4 + 10 + 2,
> + .vrefresh = 60,
> +};
> +
> +static const struct panel_desc qd43003c0_40 = {
> + .modes = &qd43003c0_40_mode,
> + .num_modes = 1,
> + .size = {
> + .width = 95,
> + .height = 53,
> + },
> + .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
> +};
Can you also add .bpc = 8 above so that drivers that don't support the
.bus_format can still support this panel?
Thierry
Attachment:
signature.asc
Description: PGP signature