Re: [PATCH 8/9] clocksource: Improve unstable clocksource detection

From: John Stultz
Date: Mon Aug 17 2015 - 18:17:33 EST


On Mon, Aug 17, 2015 at 3:04 PM, Thomas Gleixner <tglx@xxxxxxxxxxxxx> wrote:
> On Mon, 17 Aug 2015, John Stultz wrote:
>
>> From: Shaohua Li <shli@xxxxxx>
>>
>> >From time to time we saw TSC is marked as unstable in our systems, while
>
> Stray '>'
>
>> the CPUs declare to have stable TSC. Looking at the clocksource unstable
>> detection, there are two problems:
>> - watchdog clock source wrap. HPET is the most common watchdog clock
>> source. It's 32-bit and runs in 14.3Mhz. That means the hpet counter
>> can wrap in about 5 minutes.
>> - threshold isn't scaled against interval. The threshold is 0.0625s in
>> 0.5s interval. What if the actual interval is bigger than 0.5s?
>>
>> The watchdog runs in a timer bh, so hard/soft irq can defer its running.
>> Heavy network stack softirq can hog a cpu. IPMI driver can disable
>> interrupt for a very long time.
>
> And they hold off the timer softirq for more than a second? Don't you
> think that's the problem which needs to be fixed?

Though this is an issue I've experienced (and tried unsuccessfully to
fix in a more complicated way) with the RT kernel, where high priority
tasks blocked the watchdog long enough that we'd disqualify the TSC.

Ideally that sort of high-priority RT busyness would be avoided, but
its also a pain to have false positive trigger when doing things like
stress testing.


>> The first problem is mostly we are suffering I think.
>
> So you think that's the root cause and because your patch makes it go
> away it's not necessary to know for sure, right?
>
>> Here is a simple patch to fix the issues. If the waterdog doesn't run
>
> waterdog?

Allergen-free. :)


>> for a long time, we ignore the detection.
>
> What's 'long time'? Please explain the numbers chosen.
>
>> This should work for the two
>
> Emphasis on 'should'?
>
>> problems. For the second one, we probably doen't need to scale if the
>> interval isn't very long.
>
> -ENOPARSE
>
>> @@ -122,9 +122,10 @@ static int clocksource_watchdog_kthread(void *data);
>> static void __clocksource_change_rating(struct clocksource *cs, int rating);
>>
>> /*
>> - * Interval: 0.5sec Threshold: 0.0625s
>> + * Interval: 0.5sec MaxInterval: 1s Threshold: 0.0625s
>> */
>> #define WATCHDOG_INTERVAL (HZ >> 1)
>> +#define WATCHDOG_MAX_INTERVAL_NS (NSEC_PER_SEC)
>> #define WATCHDOG_THRESHOLD (NSEC_PER_SEC >> 4)
>>
>> static void clocksource_watchdog_work(struct work_struct *work)
>> @@ -217,7 +218,9 @@ static void clocksource_watchdog(unsigned long data)
>> continue;
>>
>> /* Check the deviation from the watchdog clocksource. */
>> - if ((abs(cs_nsec - wd_nsec) > WATCHDOG_THRESHOLD)) {
>> + if ((abs(cs_nsec - wd_nsec) > WATCHDOG_THRESHOLD) &&
>> + cs_nsec < WATCHDOG_MAX_INTERVAL_NS &&
>> + wd_nsec < WATCHDOG_MAX_INTERVAL_NS) {
>
> So that adds a new opportunity for undiscovered wreckage:
>
> clocksource_watchdog();
> .... <--- SMI skews TSC
> looong_irq_disabled_region();
> ....
> clocksource_watchdog(); <--- Does not detect skew
>
> and it will not detect it later on if that SMI was a one time event.
>
> So 'fixing' the watchdog is the wrong approach. Fixing the stuff which
> prevents the watchdog to run is the proper thing to do.

I'm not sure here. I feel like these delay-caused false positives
(I've seen similar reports w/ VMs being stalled) are more common then
one-off SMI TSC skews.

There are hard lines in the timekeeping code, where we do say: Don't
delay us past X or we can't really handle it, but in this case, the
main clocksource is fine and the limit is being caused by the
watchdog. So I think some sort of a solution to remove this
restriction would be good. We don't want to needlessly punish fine
hardware because our checks for bad hardware add extra restrictions.

That said, I agree the "should"s and other vague qualifiers in the
commit description you point out should have more specifics to back
things up. And I'm fine delaying this (and the follow-on) patch until
those details are provided.

thanks
-john
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/