[RFC PATCH 1/7] DMA: tegra-apb: Correct runtime-pm usage

[Jon Hunter]

The tegra-apb DMA driver enables runtime-pm but never calls
pm_runtime_get/put and hence the runtime-pm callbacks are never invoked.
The driver manages the clocks by directly calling clk_prepare_enable()
and clk_unprepare_disable().

Fix this by replacing the clk_prepare_enable() and clk_disable_unprepare()
with pm_runtime_get_sync() and pm_runtime_put(), respectively. Note that
the consequence of this is that if runtime-pm is disabled, then the clocks
will remain on the entire time the driver is loaded. However, if
runtime-pm is disabled, then power is not most likely not a concern.

Signed-off-by: Jon Hunter <jonathanh@xxxxxxxxxx>
---
 drivers/dma/tegra20-apb-dma.c | 36 ++++++++++++------------------------
 1 file changed, 12 insertions(+), 24 deletions(-)

diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
index c8f79dcaaee8..097432ea89fa 100644
--- a/drivers/dma/tegra20-apb-dma.c
+++ b/drivers/dma/tegra20-apb-dma.c
@@ -1182,14 +1182,11 @@ static int tegra_dma_alloc_chan_resources(struct dma_chan *dc)
 {
 	struct tegra_dma_channel *tdc = to_tegra_dma_chan(dc);
 	struct tegra_dma *tdma = tdc->tdma;
-	int ret;
 
 	dma_cookie_init(&tdc->dma_chan);
 	tdc->config_init = false;
-	ret = clk_prepare_enable(tdma->dma_clk);
-	if (ret < 0)
-		dev_err(tdc2dev(tdc), "clk_prepare_enable failed: %d\n", ret);
-	return ret;
+
+	return pm_runtime_get_sync(tdma->dev);
 }
 
 static void tegra_dma_free_chan_resources(struct dma_chan *dc)
@@ -1232,7 +1229,7 @@ static void tegra_dma_free_chan_resources(struct dma_chan *dc)
 		list_del(&sg_req->node);
 		kfree(sg_req);
 	}
-	clk_disable_unprepare(tdma->dma_clk);
+	pm_runtime_put(tdma->dev);
 
 	tdc->slave_id = 0;
 }
@@ -1356,21 +1353,13 @@ static int tegra_dma_probe(struct platform_device *pdev)
 	spin_lock_init(&tdma->global_lock);
 
 	pm_runtime_enable(&pdev->dev);
-	if (!pm_runtime_enabled(&pdev->dev)) {
+	if (!pm_runtime_enabled(&pdev->dev))
 		ret = tegra_dma_runtime_resume(&pdev->dev);
-		if (ret) {
-			dev_err(&pdev->dev, "dma_runtime_resume failed %d\n",
-				ret);
-			goto err_pm_disable;
-		}
-	}
+	else
+		ret = pm_runtime_get_sync(&pdev->dev);
 
-	/* Enable clock before accessing registers */
-	ret = clk_prepare_enable(tdma->dma_clk);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "clk_prepare_enable failed: %d\n", ret);
+	if (ret)
 		goto err_pm_disable;
-	}
 
 	/* Reset DMA controller */
 	reset_control_assert(tdma->rst);
@@ -1382,7 +1371,7 @@ static int tegra_dma_probe(struct platform_device *pdev)
 	tdma_write(tdma, TEGRA_APBDMA_CONTROL, 0);
 	tdma_write(tdma, TEGRA_APBDMA_IRQ_MASK_SET, 0xFFFFFFFFul);
 
-	clk_disable_unprepare(tdma->dma_clk);
+	pm_runtime_put(&pdev->dev);
 
 	INIT_LIST_HEAD(&tdma->dma_dev.channels);
 	for (i = 0; i < cdata->nr_channels; i++) {
@@ -1484,7 +1473,6 @@ err_irq:
 		struct tegra_dma_channel *tdc = &tdma->channels[i];
 		tasklet_kill(&tdc->tasklet);
 	}
-
 err_pm_disable:
 	pm_runtime_disable(&pdev->dev);
 	if (!pm_runtime_status_suspended(&pdev->dev))
@@ -1543,7 +1531,7 @@ static int tegra_dma_pm_suspend(struct device *dev)
 	int ret;
 
 	/* Enable clock before accessing register */
-	ret = tegra_dma_runtime_resume(dev);
+	ret = pm_runtime_get_sync(dev);
 	if (ret < 0)
 		return ret;
 
@@ -1560,7 +1548,7 @@ static int tegra_dma_pm_suspend(struct device *dev)
 	}
 
 	/* Disable clock */
-	tegra_dma_runtime_suspend(dev);
+	pm_runtime_put(dev);
 	return 0;
 }
 
@@ -1571,7 +1559,7 @@ static int tegra_dma_pm_resume(struct device *dev)
 	int ret;
 
 	/* Enable clock before accessing register */
-	ret = tegra_dma_runtime_resume(dev);
+	ret = pm_runtime_get_sync(dev);
 	if (ret < 0)
 		return ret;
 
@@ -1592,7 +1580,7 @@ static int tegra_dma_pm_resume(struct device *dev)
 	}
 
 	/* Disable clock */
-	tegra_dma_runtime_suspend(dev);
+	pm_runtime_put(dev);
 	return 0;
 }
 #endif
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/