[PATCH] ARM: qcom: add memory node to IPQ806x/AP148
From: Mathieu Olivari
Date: Tue Aug 18 2015 - 18:27:05 EST
On recent bootloaders, the bootloader patches the DT blob with memory
information. However, with old bootloader, this operation doesn't
happen, which leads the board to freeze in the early init code.
This patch adds the memory node to the AP148 dts explicitly to cover all
boot cases.
Signed-off-by: Mathieu Olivari <mathieu@xxxxxxxxxxxxxx>
---
arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
index 36e2b04..6886d09 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -4,6 +4,11 @@
model = "Qualcomm IPQ8064/AP148";
compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
+ memory@0 {
+ reg = <0x42000000 0x1e000000>;
+ device_type = "memory";
+ };
+
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/