Re: [PATCH v3 0/14] Add Analogix Core Display Port Driver

[Archit Taneja]

Hi,

On 08/19/2015 08:18 PM, Yakir Yang wrote:
> Hi all,
>     The Samsung Exynos eDP controller and Rockchip RK3288 eDP controller
> share the same IP, so a lot of parts can be re-used. I split the common
> code into bridge directory, then rk3288 and exynos only need to keep
> some platform code. Cause I can't find the exact IP name of exynos dp
> controller, so I decide to name dp core driver with "analogix" which I
> find in rk3288 eDP TRM ;)
>
> Beyond that, there are three light registers setting differents bewteen
> exynos and rk3288.
> 1. RK3288 have five special pll resigters which not indicata in exynos
>     dp controller.
> 2. The address of DP_PHY_PD(dp phy power manager register) are different
>     between rk3288 and exynos.
> 3. Rk3288 and exynos have different setting with AUX_HW_RETRY_CTL(dp debug
>     register).
>
> I have verified this series on two kinds of rockchip platform board, one
> is rk3288 sdk board which connect with a 2K display port monitor, the other
> is google jerry chromebook which connect with a eDP screen "cnm,n116bgeea2",
> both of them works rightlly.
>
> I haven't verified the dp function on samsung platform, cause I haven't got
> exynos boards. I can only ensure that there are no build error on samsung
> platform, wish some samsung guys help to test. ;)
>
> Thanks,
> - Yakir
>
> Changes in v3:
> - Take Thierry Reding suggest, move exynos's video_timing code
>    to analogix_dp-exynos platform driver, add get_modes method
>    to struct analogix_dp_plat_data.
> - Take Heiko suggest, rename some "samsung*" dts propery to "analogix*".
> - Take Thierry Reding suggest, dynamic parse video timing info from
>    struct drm_display_mode and struct drm_display_info.
> - Take Thierry Reding suggest, link_rate and lane_count shouldn't config to
>    the DT property value directly, but we can take those as hardware limite.
>    For example, RK3288 only support 4 physical lanes of 2.7/1.62 Gbps/lane,
>    so DT property would like "link-rate = 0x0a" "lane-count = 4".
> - Take Heiko suggest, add devicetree binding documents.
> - Take Thierry Reding suggest, remove sync pol & colorimetry properies
>    from the new analogix dp driver devicetree binding.
> - Update the exist exynos dtsi file with the latest DP DT properies.
> - Take Thierry Reding and Heiko suggest, leave "sclk_edp_24m" to rockchip
>    dp phy driver which name to "24m", and leave "sclk_edp" to analogix dp
>    core driver which name to "dp", and leave "pclk_edp" to rockchip dp platform
>    driver which name to "pclk".
> - Take Heiko suggest, add devicetree binding document.
> - Take Heiko suggest, remove "rockchip,panel" DT property, take use of remote
>    point to get panel node.
> - Add the new function point analogix_dp_platdata.get_modes init.
> - Take Heiko suggest, add rockchip dp phy driver,
>    collect the phy clocks and power control.
> - Add "analogix,need-force-hpd" to indicate whether driver need foce
>    hpd when hpd detect failed.
> - move dp hpd detect to connector detect function.
> - Add edid modes parse support
>
> Changes in v2:
> - Take Joe Preches advise, improved commit message more readable, and
>    avoid using some uncommon style like bellow:
>    -  retval = exynos_dp_read_bytes_from_i2c(...
> 				...)
>    +  retval =
>    +  exynos_dp_read_bytes_from_i2c(......);
> - Take Jingoo Han suggest, just remove my name from author list.
> - Take Jingoo Han suggest, remove new copyright
> - Fix compiled failed dut to analogix_dp_device misspell
> - Take Heiko suggest, get panel node with remote-endpoint method,
>    and create devicetree binding for driver.
> - Remove the clock enable/disbale with "sclk_edp" & "sclk_edp_24m",
>    leave those clock to rockchip dp phy driver.
> - Add GNU license v2 declared and samsung copyright
> - Fix compile failed dut to phy_pd_addr variable misspell error
>
> Yakir Yang (14):
>    drm: exynos/dp: fix code style
>    drm: exynos/dp: convert to drm bridge mode
>    drm: bridge: analogix_dp: split exynos dp driver to bridge dir
>    drm: bridge/analogix_dp: dynamic parse sync_pol & interlace &
>      colorimetry
>    drm: bridge/analogix_dp: fix link_rate & lane_count bug
>    Documentation: drm/bridge: add document for analogix_dp
>    drm: rockchip/dp: add rockchip platform dp driver
>    phy: Add driver for rockchip Display Port PHY
>    drm: bridge/analogix_dp: add platform device type support
>    drm: bridge: analogix_dp: add some rk3288 special registers setting
>    drm: bridge: analogix_dp: try force hpd after plug in lookup failed
>    drm: bridge/analogix_dp: expand the delay time for hpd detect
>    drm: bridge/analogix_dp: move hpd detect to connector detect function
>    drm: bridge/analogix_dp: add edid modes parse in get_modes method
>
>   .../devicetree/bindings/drm/bridge/analogix_dp.txt |   73 +
>   .../devicetree/bindings/phy/rockchip-dp-phy.txt    |   26 +
>   .../bindings/video/analogix_dp-rockchip.txt        |   83 ++
>   .../devicetree/bindings/video/exynos_dp.txt        |   51 +-
>   arch/arm/boot/dts/exynos5250-arndale.dts           |   10 +-
>   arch/arm/boot/dts/exynos5250-smdk5250.dts          |   10 +-
>   arch/arm/boot/dts/exynos5250-snow.dts              |   12 +-
>   arch/arm/boot/dts/exynos5250-spring.dts            |   12 +-
>   arch/arm/boot/dts/exynos5420-peach-pit.dts         |   12 +-
>   arch/arm/boot/dts/exynos5420-smdk5420.dts          |   10 +-
>   arch/arm/boot/dts/exynos5800-peach-pi.dts          |   12 +-
>   drivers/gpu/drm/bridge/Kconfig                     |    5 +
>   drivers/gpu/drm/bridge/Makefile                    |    1 +
>   drivers/gpu/drm/bridge/analogix_dp_core.c          | 1382 +++++++++++++++++++
>   drivers/gpu/drm/bridge/analogix_dp_core.h          |  286 ++++
>   drivers/gpu/drm/bridge/analogix_dp_reg.c           | 1294 ++++++++++++++++++
>   .../exynos_dp_reg.h => bridge/analogix_dp_reg.h}   |  270 ++--
>   drivers/gpu/drm/exynos/Kconfig                     |    5 +-
>   drivers/gpu/drm/exynos/Makefile                    |    2 +-
>   drivers/gpu/drm/exynos/analogix_dp-exynos.c        |  347 +++++
>   drivers/gpu/drm/exynos/exynos_dp_core.c            | 1416 --------------------
>   drivers/gpu/drm/exynos/exynos_dp_core.h            |  282 ----
>   drivers/gpu/drm/exynos/exynos_dp_reg.c             | 1263 -----------------
>   drivers/gpu/drm/rockchip/Kconfig                   |    9 +
>   drivers/gpu/drm/rockchip/Makefile                  |    1 +
>   drivers/gpu/drm/rockchip/analogix_dp-rockchip.c    |  390 ++++++
>   drivers/phy/Kconfig                                |    7 +
>   drivers/phy/Makefile                               |    1 +
>   drivers/phy/phy-rockchip-dp.c                      |  185 +++
>   include/drm/bridge/analogix_dp.h                   |   40 +
>   30 files changed, 4325 insertions(+), 3172 deletions(-)
>   create mode 100644 Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
>   create mode 100644 Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
>   create mode 100644 Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
>   create mode 100644 drivers/gpu/drm/bridge/analogix_dp_core.c
>   create mode 100644 drivers/gpu/drm/bridge/analogix_dp_core.h
>   create mode 100644 drivers/gpu/drm/bridge/analogix_dp_reg.c

Minor comment: Since there are a few files required for the driver,
could you create a separate folder within drivers/gpu/drm/bridge?

Thanks,
Archit

--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/