Re: [PATCH v2 3/3] media: atmel-isi: add sanity check for supported formats in set_fmt()

[Josh Wu]

Hi, Laurent

Could you have time to review this patch? so that I can send a pull 
request with your reviewed-by tags.

Best Regards,
Josh Wu

On 8/5/2015 11:26 AM, Josh Wu wrote:
> After adding the format check in set_fmt(), we don't need any format check
> in configure_geometry(). So make configure_geometry() as void type.
>
> Signed-off-by: Josh Wu <josh.wu@xxxxxxxxx>
> ---
>
> Changes in v2:
> - new added patch
>
>   drivers/media/platform/soc_camera/atmel-isi.c | 39 +++++++++++++++++++++------
>   1 file changed, 31 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c
> index cb46aec..d0df518 100644
> --- a/drivers/media/platform/soc_camera/atmel-isi.c
> +++ b/drivers/media/platform/soc_camera/atmel-isi.c
> @@ -103,17 +103,19 @@ static u32 isi_readl(struct atmel_isi *isi, u32 reg)
>   	return readl(isi->regs + reg);
>   }
>   
> -static int configure_geometry(struct atmel_isi *isi, u32 width,
> +static void configure_geometry(struct atmel_isi *isi, u32 width,
>   			u32 height, u32 code)
>   {
>   	u32 cfg2;
>   
>   	/* According to sensor's output format to set cfg2 */
>   	switch (code) {
> -	/* YUV, including grey */
> +	default:
> +	/* Grey */
>   	case MEDIA_BUS_FMT_Y8_1X8:
>   		cfg2 = ISI_CFG2_GRAYSCALE;
>   		break;
> +	/* YUV */
>   	case MEDIA_BUS_FMT_VYUY8_2X8:
>   		cfg2 = ISI_CFG2_YCC_SWAP_MODE_3;
>   		break;
> @@ -127,8 +129,6 @@ static int configure_geometry(struct atmel_isi *isi, u32 width,
>   		cfg2 = ISI_CFG2_YCC_SWAP_DEFAULT;
>   		break;
>   	/* RGB, TODO */
> -	default:
> -		return -EINVAL;
>   	}
>   
>   	isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
> @@ -139,8 +139,29 @@ static int configure_geometry(struct atmel_isi *isi, u32 width,
>   	cfg2 |= ((height - 1) << ISI_CFG2_IM_VSIZE_OFFSET)
>   			& ISI_CFG2_IM_VSIZE_MASK;
>   	isi_writel(isi, ISI_CFG2, cfg2);
> +}
>   
> -	return 0;
> +static bool is_supported(struct soc_camera_device *icd,
> +		const struct soc_camera_format_xlate *xlate)
> +{
> +	bool ret = true;
> +
> +	switch (xlate->code) {
> +	/* YUV, including grey */
> +	case MEDIA_BUS_FMT_Y8_1X8:
> +	case MEDIA_BUS_FMT_VYUY8_2X8:
> +	case MEDIA_BUS_FMT_UYVY8_2X8:
> +	case MEDIA_BUS_FMT_YVYU8_2X8:
> +	case MEDIA_BUS_FMT_YUYV8_2X8:
> +		break;
> +	/* RGB, TODO */
> +	default:
> +		dev_err(icd->parent, "not supported format: %d\n",
> +					xlate->code);
> +		ret = false;
> +	}
> +
> +	return ret;
>   }
>   
>   static irqreturn_t atmel_isi_handle_streaming(struct atmel_isi *isi)
> @@ -391,10 +412,8 @@ static int start_streaming(struct vb2_queue *vq, unsigned int count)
>   	/* Disable all interrupts */
>   	isi_writel(isi, ISI_INTDIS, (u32)~0UL);
>   
> -	ret = configure_geometry(isi, icd->user_width, icd->user_height,
> +	configure_geometry(isi, icd->user_width, icd->user_height,
>   				icd->current_fmt->code);
> -	if (ret < 0)
> -		return ret;
>   
>   	spin_lock_irq(&isi->lock);
>   	/* Clear any pending interrupt */
> @@ -515,6 +534,10 @@ static int isi_camera_set_fmt(struct soc_camera_device *icd,
>   	if (mf->code != xlate->code)
>   		return -EINVAL;
>   
> +	/* check with atmel-isi support format */
> +	if (!is_supported(icd, xlate))
> +		return -EINVAL;
> +
>   	pix->width		= mf->width;
>   	pix->height		= mf->height;
>   	pix->field		= mf->field;

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/