[PATCH v7 2/2] usb: Add support for ACPI identification to xhci-platform

[Duc Dang]

Provide the methods to let ACPI identify the need to use
xhci-platform. Change the Kconfig files so the
xhci-plat.o file is selectable during kernel config.

This has been tested on an ARM64 machine with platform XHCI, an
x86_64 machine with XHCI, and an x86_64 machine without XHCI.
There were no regressions or error messages on the machines
without platform XHCI.

[dhdang: regenerate the patch over 4.2-rc5 and address new comments]
Signed-off-by: Mark Langsdorf <mlangsdo@xxxxxxxxxx>
Signed-off-by: Duc Dang <dhdang@xxxxxxx>

---
Changes from v6:
	-None

Change from v5:
        -Change comment to "XHCI-compliant USB Controller" as
        "PNP0D10" ID is not X-Gene specific

Changes from v4:
        -Remove #ifdef CONFIG_ACPI

Changes from v3:
        -Regenerate the patch over 4.2-rc5
        -No code change

Changes from v2
        -Replaced tristate with a boolean as the driver doesn't
                compile as a module
        -Correct --help-- to ---help---

Changes from v1
        -Renamed from "add support for APM X-Gene to xhci-platform"
        -Removed changes to arm64/Kconfig
        -Made CONFIG_USB_XHCI_PLATFORM a user selectable config option

 drivers/usb/host/Kconfig     | 7 ++++++-
 drivers/usb/host/xhci-plat.c | 9 +++++++++
 2 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 8afc3c1..96231ee 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -32,7 +32,12 @@ config USB_XHCI_PCI
        default y
 
 config USB_XHCI_PLATFORM
-	tristate
+	tristate "xHCI platform driver support"
+	---help---
+	  Say 'Y' to enable the support for the xHCI host controller
+	  as a platform device. Many ARM SoCs provide USB this way.
+
+	  If unsure, say 'Y'.
 
 config USB_XHCI_MVEBU
 	tristate "xHCI support for Marvell Armada 375/38x"
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index e4c7f9d..6c03e1c 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -19,6 +19,7 @@
 #include <linux/usb/phy.h>
 #include <linux/slab.h>
 #include <linux/usb/xhci_pdriver.h>
+#include <linux/acpi.h>
 
 #include "xhci.h"
 #include "xhci-mvebu.h"
@@ -267,6 +268,13 @@ static const struct of_device_id usb_xhci_of_match[] = {
 MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
 #endif
 
+static const struct acpi_device_id usb_xhci_acpi_match[] = {
+	/* XHCI-compliant USB Controller */
+	{ "PNP0D10", },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, usb_xhci_acpi_match);
+
 static struct platform_driver usb_xhci_driver = {
 	.probe	= xhci_plat_probe,
 	.remove	= xhci_plat_remove,
@@ -274,6 +282,7 @@ static struct platform_driver usb_xhci_driver = {
 		.name = "xhci-hcd",
 		.pm = DEV_PM_OPS,
 		.of_match_table = of_match_ptr(usb_xhci_of_match),
+		.acpi_match_table = ACPI_PTR(usb_xhci_acpi_match),
 	},
 };
 MODULE_ALIAS("platform:xhci-hcd");
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/