Re: [PATCH 2/3] iio: temperature: add max6675 thermocouple converter driver

[Jonathan Cameron]

On 20/08/15 01:23, Matt Porter wrote:
> On Sat, Aug 08, 2015 at 12:39:40PM +0100, Jonathan Cameron wrote:
>> On 06/08/15 18:38, Matt Porter wrote:
>>> On Mon, Aug 03, 2015 at 11:26:12PM +0200, Peter Meerwald wrote:
>>>> On Mon, 3 Aug 2015, Matt Porter wrote:
>>>
>>> ...
>>>
>>>>> +static int max6675_read(struct max6675_state *st, int *val)
>>>>> +{
>>>>> +	int ret;
>>>>> +
>>>>> +	ret = spi_read(st->spi, val, 2);
>>>>> +	if (ret < 0)
>>>>> +		return ret;
>>>>> +
>>>>> +	/* Temperature is bits 14..3 */
>>>>> +	*val = (*val >> 3) & 0xfff;
>>>>
>>>> what about endianness conversion?
>>>> use be16_to_cpu()
>>>
>>> Apologies, I spoke before engaging the brain on my first reply to this
>>> As specified by the SPI subsystem docs, SPI buffers are always stored
>>> in native endian order. There is no need for endianness conversion here.
>> First of all, which doc say this?
>> Secondly how does SPI know the endianness of the sensor which is what
>> actually matters here?  I2C can in theory make these guarantees as there
>> is an expected byte order on the wire (even if quite a few drivers don't
>> conform to the spec anyway). No such guarantee can exist for SPI.
> 
> include/linux/spi/spi.h:
> 
>  * In-memory data values are always in native CPU byte order, translated
>  * from the wire byte order (big-endian except with SPI_LSB_FIRST).  So
>  * for example when bits_per_word is sixteen, buffers are 2N bytes long
>  * (@len = 2N) and hold N sixteen bit words in CPU byte order.
> 
> So, as you mention, there's no standardized byte order but it's
> controlled with the per transfer flag and big endian by default.
> 
Thanks, I'd never picked up on that before!

Jonathan
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/