Re: [PATCH 3/3] scsi:stex.c Add S3/S4 support

From: Johannes Thumshirn
Date: Thu Sep 03 2015 - 10:04:00 EST


Charles Chiou <ch1102chiou@xxxxxxxxx> writes:

> From f442518879f8f41d103b684046d912eca13844e7 Mon Sep 17 00:00:00 2001
> From: Charles <charles.chiou@xxxxxxxxxxxxxx>
> Date: Wed, 2 Sep 2015 20:54:45 +0800
> Subject: [PATCH 3/3] scsi:stex.c Add S3/S4 support
>
> Add S3/S4 support, add .suspend and .resume function in pci_driver.
> In .suspend handler, driver send S3/S4 signal to the device.
>
> V2: Remove blank lines
>
> Signed-off-by: Charles Chiou <charles.chiou@xxxxxxxxxxxxxx>
> ---
> drivers/scsi/stex.c | 59 ++++++++++++++++++++++++++++++++++++++++++++++++++---
> 1 file changed, 56 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c
> index 4ef0c80..c96a86d 100644
> --- a/drivers/scsi/stex.c
> +++ b/drivers/scsi/stex.c
> @@ -166,6 +166,13 @@ enum {
>
> ST_ADDITIONAL_MEM = 0x200000,
> ST_ADDITIONAL_MEM_MIN = 0x80000,
> + PMIC_SHUTDOWN = 0x0D,
> + PMIC_REUMSE = 0x10,
> + ST_IGNORED = -1,
> + ST_S3 = 3,
> + ST_S4 = 4,
> + ST_S5 = 5,
> + ST_S6 = 6,
> };
>
> struct st_sgitem {
> @@ -1733,7 +1740,7 @@ out_disable:
> return err;
> }
>
> -static void stex_hba_stop(struct st_hba *hba)
> +static void stex_hba_stop(struct st_hba *hba, int st_sleep_mic)
> {
> struct req_msg *req;
> struct st_msg_header *msg_h;
> @@ -1749,11 +1756,18 @@ static void stex_hba_stop(struct st_hba *hba)
> } else
> memset(req, 0, hba->rq_size);
>
> - if (hba->cardtype == st_yosemite || hba->cardtype == st_yel) {
> + if ((hba->cardtype == st_yosemite || hba->cardtype == st_yel)
> + && st_sleep_mic == ST_IGNORED) {
> req->cdb[0] = MGT_CMD;
> req->cdb[1] = MGT_CMD_SIGNATURE;
> req->cdb[2] = CTLR_CONFIG_CMD;
> req->cdb[3] = CTLR_SHUTDOWN;
> + } else if (hba->cardtype == st_yel && st_sleep_mic != ST_IGNORED) {
> + req->cdb[0] = MGT_CMD;
> + req->cdb[1] = MGT_CMD_SIGNATURE;
> + req->cdb[2] = CTLR_CONFIG_CMD;
> + req->cdb[3] = PMIC_SHUTDOWN;
> + req->cdb[4] = st_sleep_mic;
> } else {
> req->cdb[0] = CONTROLLER_CMD;
> req->cdb[1] = CTLR_POWER_STATE_CHANGE;
> @@ -1773,10 +1787,12 @@ static void stex_hba_stop(struct st_hba *hba)
> while (hba->ccb[tag].req_type & PASSTHRU_REQ_TYPE) {
> if (time_after(jiffies, before + ST_INTERNAL_TIMEOUT * HZ)) {
> hba->ccb[tag].req_type = 0;
> + hba->mu_status = MU_STATE_STOP;
> return;
> }
> msleep(1);
> }
> + hba->mu_status = MU_STATE_STOP;
> }
>
> static void stex_hba_free(struct st_hba *hba)
> @@ -1816,9 +1832,44 @@ static void stex_shutdown(struct pci_dev *pdev)
> {
> struct st_hba *hba = pci_get_drvdata(pdev);
>
> - stex_hba_stop(hba);
> + if (hba->supports_pm == 0)
> + stex_hba_stop(hba, ST_IGNORED);
> + else
> + stex_hba_stop(hba, ST_S5);
> +}
> +
> +static int stex_choice_sleep_mic(pm_message_t state)
> +{
> + switch (state.event) {
> + case PM_EVENT_SUSPEND:
> + return ST_S3;
> + case PM_EVENT_FREEZE:
> + case PM_EVENT_HIBERNATE:
> + return ST_S4;
> + default:
> + return ST_S4;
> + }
> +}
> +
> +static int stex_suspend(struct pci_dev *pdev, pm_message_t state)
> +{
> + struct st_hba *hba = pci_get_drvdata(pdev);
> +
> + if (hba->cardtype == st_yel && hba->supports_pm == 1)
> + stex_hba_stop(hba, stex_choice_sleep_mic(state));
> + else
> + stex_hba_stop(hba, ST_IGNORED);
> + return 0;
> }
>
> +static int stex_resume(struct pci_dev *pdev)
> +{
> + struct st_hba *hba = pci_get_drvdata(pdev);
> +
> + hba->mu_status = MU_STATE_STARTING;
> + stex_handshake(hba);
> + return 0;
> +}
> MODULE_DEVICE_TABLE(pci, stex_pci_tbl);
>
> static struct pci_driver stex_pci_driver = {
> @@ -1827,6 +1878,8 @@ static struct pci_driver stex_pci_driver = {
> .probe = stex_probe,
> .remove = stex_remove,
> .shutdown = stex_shutdown,
> + .suspend = stex_suspend,
> + .resume = stex_resume,
> };
>
> static int __init stex_init(void)

Looks OK from my side
Reviewed-by: Johannes Thumshirn <jthumshirn@xxxxxxx>

--
Johannes Thumshirn Storage
jthumshirn@xxxxxxx +49 911 74053 689
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 NÃrnberg
GF: Felix ImendÃrffer, Jane Smithard, Graham Norton
HRB 21284 (AG NÃrnberg)
Key fingerprint = EC38 9CAB C2C4 F25D 8600 D0D0 0393 969D 2D76 0850
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/