[PATCH] USB: serial: add Moxa UPORT 11x0 driver
From: Mathieu OTHACEHE
Date: Fri Sep 04 2015 - 01:44:03 EST
Add a driver which supports :
- UPort 1110 : 1 port RS-232 USB to Serial Hub.
- UPort 1130 : 1 port RS-422/485 USB to Serial Hub.
- UPort 1130I : 1 port RS-422/485 USB to Serial Hub with Isolation.
- UPort 1150 : 1 port RS-232/422/485 USB to Serial Hub.
- UPort 1150I : 1 port RS-232/422/485 USB to Serial Hub with Isolation.
This driver is based on GPL MOXA driver written by Hen Huang and available
on MOXA website. The original driver was based on io_ti serial driver.
Signed-off-by: Mathieu OTHACEHE <m.othacehe@xxxxxxxxx>
---
drivers/usb/serial/Kconfig | 16 +
drivers/usb/serial/Makefile | 1 +
drivers/usb/serial/mxu11x0.c | 1500 ++++++++++++++++++++++++++++++++++++++++++
drivers/usb/serial/mxu11x0.h | 199 ++++++
4 files changed, 1716 insertions(+)
create mode 100644 drivers/usb/serial/mxu11x0.c
create mode 100644 drivers/usb/serial/mxu11x0.h
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 56ecb8b..f612dda 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -475,6 +475,22 @@ config USB_SERIAL_MOS7840
To compile this driver as a module, choose M here: the
module will be called mos7840. If unsure, choose N.
+config USB_SERIAL_MXUPORT11
+ tristate "USB Moxa UPORT 11x0 Serial Driver"
+ ---help---
+ Say Y here if you want to use a MOXA UPort 11x0 Serial hub.
+
+ This driver supports:
+
+ - UPort 1110 : 1 port RS-232 USB to Serial Hub.
+ - UPort 1130 : 1 port RS-422/485 USB to Serial Hub.
+ - UPort 1130I : 1 port RS-422/485 USB to Serial Hub with Isolation.
+ - UPort 1150 : 1 port RS-232/422/485 USB to Serial Hub.
+ - UPort 1150I : 1 port RS-232/422/485 USB to Serial Hub with Isolation.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mxu11x0.
+
config USB_SERIAL_MXUPORT
tristate "USB Moxa UPORT Serial Driver"
---help---
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 349d9df..f3fa5e5 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -38,6 +38,7 @@ obj-$(CONFIG_USB_SERIAL_METRO) += metro-usb.o
obj-$(CONFIG_USB_SERIAL_MOS7720) += mos7720.o
obj-$(CONFIG_USB_SERIAL_MOS7840) += mos7840.o
obj-$(CONFIG_USB_SERIAL_MXUPORT) += mxuport.o
+obj-$(CONFIG_USB_SERIAL_MXUPORT11) += mxu11x0.o
obj-$(CONFIG_USB_SERIAL_NAVMAN) += navman.o
obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o
obj-$(CONFIG_USB_SERIAL_OPTICON) += opticon.o
diff --git a/drivers/usb/serial/mxu11x0.c b/drivers/usb/serial/mxu11x0.c
new file mode 100644
index 0000000..20fa15d
--- /dev/null
+++ b/drivers/usb/serial/mxu11x0.c
@@ -0,0 +1,1500 @@
+/*
+ *
+ * USB Moxa UPORT 11x0 Serial Driver
+ *
+ * Copyright (C) 2007 MOXA Technologies Co., Ltd.
+ * Copyright (C) 2015 Mathieu Othacehe <m.othacehe@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *
+ * Supports the following Moxa USB to serial converters:
+ * UPort 1110, 1 port RS-232 USB to Serial Hub.
+ * UPort 1130, 1 port RS-422/485 USB to Serial Hub.
+ * UPort 1130I, 1 port RS-422/485 USB to Serial Hub with isolation
+ * protection.
+ * UPort 1150, 1 port RS-232/422/485 USB to Serial Hub.
+ * UPort 1150I, 1 port RS-232/422/485 USB to Serial Hub with isolation
+ * protection.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <linux/jiffies.h>
+#include <linux/serial.h>
+#include <linux/serial_reg.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+#include "mxu11x0.h"
+
+struct mxu1_port {
+ int mxp_is_open;
+ __u8 mxp_msr;
+ __u8 mxp_lsr;
+ __u8 mxp_shadow_mcr;
+ __u8 mxp_uart_mode; /* 232 or 485 modes */
+ __u8 mxp_user_get_uart_mode;
+ unsigned int mxp_uart_base_addr;
+ int mxp_flags;
+ int mxp_msr_wait_flags;
+ struct async_icount mxp_icount;
+ wait_queue_head_t mxp_msr_wait; /* wait for msr change */
+ struct mxu1_device *mxp_mxdev;
+ struct usb_serial_port *mxp_port;
+ spinlock_t mxp_lock;
+ int mxp_read_urb_state;
+ int mxp_write_urb_in_use;
+ int mxp_send_break;
+ int mxp_set_B0;
+};
+
+struct mxu1_device {
+ struct mutex mxd_lock;
+ int mxd_open_port_count;
+ struct usb_serial *mxd_serial;
+ int mxd_model_name;
+};
+
+/* supported setserial flags */
+#define MXU1_SET_SERIAL_FLAGS (ASYNC_LOW_LATENCY)
+
+#define MXU1_DEFAULT_LOW_LATENCY 1
+
+#define MXU1_TRANSFER_TIMEOUT 2
+#define MXU1_MSR_WAIT_TIMEOUT (5 * HZ)
+
+/* Configuration ids */
+#define MXU1_BOOT_CONFIG 1
+#define MXU1_ACTIVE_CONFIG 2
+
+/* read urb states */
+#define MXU1_READ_URB_RUNNING 0
+#define MXU1_READ_URB_STOPPING 1
+#define MXU1_READ_URB_STOPPED 2
+
+#define MXU1_DEFAULT_CLOSING_WAIT 4000 /* in .01 secs */
+
+static const struct usb_device_id mxuport11_idtable[] = {
+ { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1110_PRODUCT_ID) },
+ { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1130_PRODUCT_ID) },
+ { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1150_PRODUCT_ID) },
+ { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1151_PRODUCT_ID) },
+ { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1131_PRODUCT_ID) },
+ { }
+};
+
+MODULE_DEVICE_TABLE(usb, mxuport11_idtable);
+
+static int closing_wait = MXU1_DEFAULT_CLOSING_WAIT;
+
+static void mxu1_send(struct mxu1_port *mxport);
+static void mxu1_recv(struct mxu1_port *mxport,
+ unsigned char *data, int length);
+
+/* Write the given buffer out to the control pipe. */
+static int mxu1_send_ctrl_data_urb(struct usb_serial *serial,
+ u8 request,
+ u16 value, u16 index,
+ u8 *data, size_t size)
+{
+ int status;
+
+ status = usb_control_msg(serial->dev,
+ usb_sndctrlpipe(serial->dev, 0),
+ request,
+ (USB_DIR_OUT | USB_TYPE_VENDOR |
+ USB_RECIP_DEVICE), value, index,
+ data, size,
+ 1000);
+ if (status < 0) {
+ dev_err(&serial->interface->dev,
+ "%s - usb_control_msg failed (%d)\n",
+ __func__, status);
+ return status;
+ }
+
+ if (status != size) {
+ dev_err(&serial->interface->dev,
+ "%s - short write (%d / %zd)\n",
+ __func__, status, size);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/* Send a vendor request without any data */
+static int mxu1_send_ctrl_urb(struct usb_serial *serial,
+ u8 request, u16 value, u16 index)
+{
+ return mxu1_send_ctrl_data_urb(serial, request, value, index,
+ NULL, 0);
+}
+
+static void mxu1_stop_read(struct mxu1_port *mxport, struct tty_struct *tty)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&mxport->mxp_lock, flags);
+
+ if (mxport->mxp_read_urb_state == MXU1_READ_URB_RUNNING)
+ mxport->mxp_read_urb_state = MXU1_READ_URB_STOPPING;
+
+ spin_unlock_irqrestore(&mxport->mxp_lock, flags);
+}
+
+
+static int mxu1_restart_read(struct mxu1_port *mxport, struct tty_struct *tty)
+{
+ struct urb *urb;
+ int status = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&mxport->mxp_lock, flags);
+
+ if (mxport->mxp_read_urb_state == MXU1_READ_URB_STOPPED) {
+ urb = mxport->mxp_port->read_urb;
+ status = usb_submit_urb(urb, GFP_KERNEL);
+ }
+ mxport->mxp_read_urb_state = MXU1_READ_URB_RUNNING;
+
+ spin_unlock_irqrestore(&mxport->mxp_lock, flags);
+
+ return status;
+}
+
+static int mxu1_download_firmware(struct usb_serial *serial,
+ const struct firmware *fw_p)
+{
+ int status = 0;
+ int buffer_size;
+ int pos;
+ int len;
+ int done;
+ __u8 cs = 0;
+ __u8 *buffer;
+ struct usb_device *dev = serial->dev;
+ struct mxu1_firmware_header *header;
+ unsigned int pipe = usb_sndbulkpipe(dev, serial->port[0]->
+ bulk_out_endpointAddress);
+
+ buffer_size = fw_p->size +
+ sizeof(struct mxu1_firmware_header);
+ buffer = kmalloc(buffer_size, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+ memcpy(buffer, fw_p->data, fw_p->size);
+ memset(buffer + fw_p->size, 0xff, buffer_size - fw_p->size);
+
+ for (pos = sizeof(struct mxu1_firmware_header);
+ pos < buffer_size; pos++)
+ cs = (__u8)(cs + buffer[pos]);
+
+ header = (struct mxu1_firmware_header *)buffer;
+ header->wLength = cpu_to_le16(
+ (__u16)(buffer_size - sizeof(struct mxu1_firmware_header)));
+ header->bCheckSum = cs;
+
+ pr_debug("%s - downloading firmware", __func__);
+
+ for (pos = 0; pos < buffer_size; pos += done) {
+ len = min(buffer_size - pos, MXU1_DOWNLOAD_MAX_PACKET_SIZE);
+
+ status = usb_bulk_msg(dev, pipe, buffer+pos, len, &done, 1000);
+
+ if (status)
+ break;
+ }
+
+ kfree(buffer);
+
+ if (status) {
+ dev_err(&dev->dev, "%s - error downloading firmware, %d\n",
+ __func__, status);
+ return status;
+ }
+
+ msleep_interruptible(100);
+
+ status = mxu1_send_ctrl_urb(serial, MXU1_RESET_EXT_DEVICE, 0, 0);
+
+ pr_debug("%s - download successful (%d)", __func__, status);
+
+ return 0;
+}
+
+static int mxu1_port_probe(struct usb_serial_port *port)
+{
+ struct mxu1_port *mxport;
+
+ mxport = kzalloc(sizeof(struct mxu1_port), GFP_KERNEL);
+
+ if (!mxport)
+ return -ENOMEM;
+
+ spin_lock_init(&mxport->mxp_lock);
+ mxport->mxp_port = port;
+ mxport->mxp_mxdev = usb_get_serial_data(port->serial);
+ mxport->mxp_uart_base_addr = MXU1_UART1_BASE_ADDR;
+ mxport->mxp_flags = ASYNC_LOW_LATENCY;
+
+ init_waitqueue_head(&mxport->mxp_msr_wait);
+
+ if (mxport->mxp_mxdev->mxd_model_name != MXU1_MODEL_1130 &&
+ mxport->mxp_mxdev->mxd_model_name != MXU1_MODEL_1131) {
+ /* UPort 1110, 1150, 1150I */
+ mxport->mxp_uart_mode = MXU1_UART_232;
+ } else {
+ /* UPort 1130 */
+ mxport->mxp_uart_mode = MXU1_UART_485_RECEIVER_DISABLED;
+ mxport->mxp_user_get_uart_mode = MXU1_RS4852W;
+ }
+
+ usb_set_serial_port_data(port, mxport);
+
+ port->port.closing_wait = msecs_to_jiffies(closing_wait * 10);
+ port->port.drain_delay = 1;
+
+ return 0;
+}
+
+static int mxu1_startup(struct usb_serial *serial)
+{
+ struct mxu1_device *mxdev;
+ struct usb_device *dev = serial->dev;
+ char fw_name[32];
+ const struct firmware *fw_p = NULL;
+ u16 product_id;
+ int err;
+
+ pr_debug("%s - product 0x%4X, num configurations %d, configuration value %d",
+ __func__, le16_to_cpu(dev->descriptor.idProduct),
+ dev->descriptor.bNumConfigurations,
+ dev->actconfig->desc.bConfigurationValue);
+
+ /* create device structure */
+ mxdev = kzalloc(sizeof(struct mxu1_device), GFP_KERNEL);
+ if (mxdev == NULL)
+ return -ENOMEM;
+
+ mutex_init(&mxdev->mxd_lock);
+ mxdev->mxd_serial = serial;
+ usb_set_serial_data(serial, mxdev);
+
+ /* determine device type */
+ if (!usb_match_id(serial->interface, mxuport11_idtable))
+ return 0;
+
+ product_id = dev->descriptor.idProduct;
+ switch (product_id) {
+ case MXU1_1110_PRODUCT_ID:
+ mxdev->mxd_model_name = MXU1_MODEL_1110;
+ break;
+ case MXU1_1130_PRODUCT_ID:
+ mxdev->mxd_model_name = MXU1_MODEL_1130;
+ break;
+ case MXU1_1131_PRODUCT_ID:
+ mxdev->mxd_model_name = MXU1_MODEL_1131;
+ break;
+ case MXU1_1150_PRODUCT_ID:
+ mxdev->mxd_model_name = MXU1_MODEL_1150;
+ break;
+ case MXU1_1151_PRODUCT_ID:
+ mxdev->mxd_model_name = MXU1_MODEL_1151;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ /* if we have only 1 configuration, download firmware */
+ if (dev->config->interface[0]->cur_altsetting->
+ desc.bNumEndpoints == 1) {
+
+ snprintf(fw_name,
+ sizeof(fw_name) - 1,
+ "moxa/moxa-%04x.fw",
+ le16_to_cpu(product_id));
+
+ err = request_firmware(&fw_p, fw_name, &serial->interface->dev);
+ if (err) {
+ dev_err(&serial->interface->dev, "Firmware %s not found\n",
+ fw_name);
+ kfree(mxdev);
+ return err;
+ }
+
+ err = mxu1_download_firmware(serial, fw_p);
+ if (err) {
+ kfree(mxdev);
+ return err;
+ }
+
+ }
+
+ if (fw_p)
+ release_firmware(fw_p);
+
+ return 0;
+}
+
+static int mxu1_write_byte(struct mxu1_device *mxdev, unsigned long addr,
+ __u8 mask, __u8 byte)
+{
+ int status = 0;
+ unsigned int size;
+ struct mxu1_write_data_bytes *data;
+ struct device *dev = &mxdev->mxd_serial->dev->dev;
+
+ pr_debug("%s - addr 0x%08lX, mask 0x%02X, byte 0x%02X", __func__,
+ addr, mask, byte);
+
+ size = sizeof(struct mxu1_write_data_bytes) + 2;
+ data = kmalloc(size, GFP_KERNEL);
+ if (!data) {
+ dev_err(dev, "%s - out of memory\n", __func__);
+ return -ENOMEM;
+ }
+
+ data->bAddrType = MXU1_RW_DATA_ADDR_XDATA;
+ data->bDataType = MXU1_RW_DATA_BYTE;
+ data->bDataCounter = 1;
+ data->wBaseAddrHi = cpu_to_be16(addr>>16);
+ data->wBaseAddrLo = cpu_to_be16(addr);
+ data->bData[0] = mask;
+ data->bData[1] = byte;
+
+ status = mxu1_send_ctrl_data_urb(mxdev->mxd_serial, MXU1_WRITE_DATA, 0,
+ MXU1_RAM_PORT,
+ (__u8 *)data,
+ size);
+
+ if (status < 0)
+ dev_err(dev, "%s - failed, %d\n", __func__, status);
+
+ kfree(data);
+
+ return status;
+}
+
+static int mxu1_set_mcr(struct mxu1_port *mxport, unsigned int mcr)
+{
+ int status = 0;
+
+ status = mxu1_write_byte(mxport->mxp_mxdev,
+ mxport->mxp_uart_base_addr +
+ MXU1_UART_OFFSET_MCR,
+ MXU1_MCR_RTS | MXU1_MCR_DTR | MXU1_MCR_LOOP,
+ mcr);
+
+ if (!status)
+ mxport->mxp_shadow_mcr = mcr;
+
+ return status;
+}
+
+static void mxu1_set_termios(struct tty_struct *tty1,
+ struct usb_serial_port *port,
+ struct ktermios *old_termios)
+{
+ struct mxu1_port *mxport = usb_get_serial_port_data(port);
+
+ struct tty_struct *tty = port->port.tty;
+
+ struct mxu1_uart_config *config;
+ tcflag_t cflag, iflag;
+ int baud;
+ int status = 0;
+ int port_number = port->port_number - port->minor;
+ unsigned int mcr;
+
+ pr_debug("%s - port %d", __func__, port->port_number);
+
+ if (!tty) {
+ pr_debug("%s - no tty or termios", __func__);
+ return;
+ }
+
+ cflag = tty->termios.c_cflag;
+ iflag = tty->termios.c_iflag;
+
+ if (old_termios && cflag == old_termios->c_cflag
+ && iflag == old_termios->c_iflag) {
+ pr_debug("%s - nothing to change", __func__);
+ return;
+ }
+
+ pr_debug("%s - clfag %08x, iflag %08x", __func__, cflag, iflag);
+
+ if (old_termios)
+ pr_debug("%s - old clfag %08x, old iflag %08x",
+ __func__,
+ old_termios->c_cflag,
+ old_termios->c_iflag);
+
+ if (mxport == NULL)
+ return;
+
+ config = kmalloc(sizeof(*config), GFP_KERNEL);
+ if (!config)
+ return;
+
+ config->wFlags = 0;
+
+ /* these flags must be set */
+ config->wFlags |= MXU1_UART_ENABLE_MS_INTS;
+ config->wFlags |= MXU1_UART_ENABLE_AUTO_START_DMA;
+ if (mxport->mxp_send_break == MXU1_LCR_BREAK)
+ config->wFlags |= MXU1_UART_SEND_BREAK_SIGNAL;
+ config->bUartMode = (__u8)(mxport->mxp_uart_mode);
+
+ switch (cflag & CSIZE) {
+ case CS5:
+ config->bDataBits = MXU1_UART_5_DATA_BITS;
+ break;
+ case CS6:
+ config->bDataBits = MXU1_UART_6_DATA_BITS;
+ break;
+ case CS7:
+ config->bDataBits = MXU1_UART_7_DATA_BITS;
+ break;
+ default:
+ case CS8:
+ config->bDataBits = MXU1_UART_8_DATA_BITS;
+ break;
+ }
+
+ if (cflag & PARENB) {
+ if (cflag & PARODD) {
+ config->wFlags |= MXU1_UART_ENABLE_PARITY_CHECKING;
+ config->bParity = MXU1_UART_ODD_PARITY;
+ } else {
+ config->wFlags |= MXU1_UART_ENABLE_PARITY_CHECKING;
+ config->bParity = MXU1_UART_EVEN_PARITY;
+ }
+ } else {
+ config->wFlags &= ~MXU1_UART_ENABLE_PARITY_CHECKING;
+ config->bParity = MXU1_UART_NO_PARITY;
+ }
+
+ if (cflag & CSTOPB)
+ config->bStopBits = MXU1_UART_2_STOP_BITS;
+ else
+ config->bStopBits = MXU1_UART_1_STOP_BITS;
+
+ if (cflag & CRTSCTS) {
+ /* RTS flow control must be off to drop RTS for baud rate B0 */
+ if ((cflag & CBAUD) != B0)
+ config->wFlags |= MXU1_UART_ENABLE_RTS_IN;
+ config->wFlags |= MXU1_UART_ENABLE_CTS_OUT;
+ } else {
+ tty->hw_stopped = 0;
+ mxu1_restart_read(mxport, tty);
+ }
+
+ if (I_IXOFF(tty) || I_IXON(tty)) {
+ config->cXon = START_CHAR(tty);
+ config->cXoff = STOP_CHAR(tty);
+
+ if (I_IXOFF(tty))
+ config->wFlags |= MXU1_UART_ENABLE_X_IN;
+ else
+ mxu1_restart_read(mxport, tty);
+
+ if (I_IXON(tty))
+ config->wFlags |= MXU1_UART_ENABLE_X_OUT;
+ }
+
+ baud = tty_get_baud_rate(tty);
+ if (!baud)
+ baud = 9600;
+ config->wBaudRate = (__u16)(923077 / baud);
+
+ pr_debug("%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d",
+ __func__, baud, config->wBaudRate, config->wFlags,
+ config->bDataBits, config->bParity, config->bStopBits,
+ config->cXon, config->cXoff, config->bUartMode);
+
+ cpu_to_be16s(&config->wBaudRate);
+ cpu_to_be16s(&config->wFlags);
+
+ status = mxu1_send_ctrl_data_urb(port->serial, MXU1_SET_CONFIG, 0,
+ (__u8)(MXU1_UART1_PORT + port_number),
+ (__u8 *)config,
+ sizeof(*config));
+ if (status)
+ dev_err(&port->dev, "%s - cannot set config on port %d, %d\n",
+ __func__,
+ port_number,
+ status);
+
+ /* SET_CONFIG asserts RTS and DTR, reset them correctly */
+ mcr = mxport->mxp_shadow_mcr;
+ /* if baud rate is B0, clear RTS and DTR */
+ if ((cflag & CBAUD) == B0) {
+
+ mcr &= ~(MXU1_MCR_DTR | MXU1_MCR_RTS);
+ mxport->mxp_set_B0 = true;
+ } else {
+ if (mxport->mxp_set_B0)
+ mcr |= MXU1_MCR_DTR;
+
+ mxport->mxp_set_B0 = false;
+ }
+
+ status = mxu1_set_mcr(mxport, mcr);
+
+ if (status)
+ dev_err(&port->dev,
+ "%s - cannot set modem control on port %d, %d\n",
+ __func__,
+ port_number,
+ status);
+
+ kfree(config);
+}
+
+static int mxu1_get_serial_info(struct mxu1_port *mxport,
+ struct serial_struct __user *ret_arg)
+{
+ struct usb_serial_port *port = mxport->mxp_port;
+ struct serial_struct ret_serial;
+ unsigned cwait;
+
+ if (!ret_arg)
+ return -EFAULT;
+
+ cwait = port->port.closing_wait;
+ if (cwait != ASYNC_CLOSING_WAIT_NONE)
+ cwait = jiffies_to_msecs(cwait) / 10;
+
+ memset(&ret_serial, 0, sizeof(ret_serial));
+
+ ret_serial.type = PORT_16550A;
+ ret_serial.line = port->minor;
+ ret_serial.port = mxport->mxp_user_get_uart_mode;
+ ret_serial.flags = mxport->mxp_flags;
+ ret_serial.xmit_fifo_size = port->bulk_out_size;
+ ret_serial.baud_base = tty_get_baud_rate(mxport->mxp_port->port.tty);
+ ret_serial.close_delay = 5*HZ;
+ ret_serial.closing_wait = cwait;
+
+ if (copy_to_user(ret_arg, &ret_serial, sizeof(*ret_arg)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int mxu1_set_serial_info(struct mxu1_port *mxport,
+ struct serial_struct __user *new_arg)
+{
+ struct serial_struct new_serial;
+
+ if (copy_from_user(&new_serial, new_arg, sizeof(new_serial)))
+ return -EFAULT;
+
+ mxport->mxp_flags = new_serial.flags & MXU1_SET_SERIAL_FLAGS;
+
+ if (mxport->mxp_mxdev->mxd_model_name != MXU1_MODEL_1110) {
+ /* UPort 1130, 1150, 1150I */
+ switch (new_serial.port) {
+ case MXU1_RS232: /* UPort 1150, 1150I */
+ if (mxport->mxp_mxdev->mxd_model_name ==
+ MXU1_MODEL_1130 ||
+ mxport->mxp_mxdev->mxd_model_name ==
+ MXU1_MODEL_1131) {
+ return -EINVAL;
+ }
+
+ mxport->mxp_uart_mode = MXU1_UART_232;
+ mxport->mxp_user_get_uart_mode = MXU1_RS232;
+ break;
+ case MXU1_RS422: /* UPort 1130, 1150, 1150I */
+ mxport->mxp_uart_mode = MXU1_UART_485_RECEIVER_ENABLED;
+ mxport->mxp_user_get_uart_mode = MXU1_RS422;
+ break;
+ case MXU1_RS4854W: /* UPort 1130, 1150, 1150I */
+ mxport->mxp_uart_mode = MXU1_UART_485_RECEIVER_ENABLED;
+ mxport->mxp_user_get_uart_mode = MXU1_RS4854W;
+ break;
+ case MXU1_RS4852W: /* UPort 1130, 1150, 1150I */
+ mxport->mxp_uart_mode = MXU1_UART_485_RECEIVER_DISABLED;
+ mxport->mxp_user_get_uart_mode = MXU1_RS4852W;
+ break;
+ default:
+ return -EINVAL;
+ }
+ } else { /* UPort 1110 */
+ if (new_serial.port != MXU1_RS232)
+ return -EINVAL;
+ }
+
+ mxu1_set_termios(NULL, mxport->mxp_port, NULL);
+
+ return 0;
+}
+
+static int mxu1_ioctl(struct tty_struct *tty,
+ unsigned int cmd, unsigned long arg)
+{
+ struct usb_serial_port *port = tty->driver_data;
+
+ struct mxu1_port *mxport = usb_get_serial_port_data(port);
+ struct async_icount cnow;
+ struct async_icount cprev;
+
+ pr_debug("%s - port %d, cmd = 0x%04X",
+ __func__, port->port_number, cmd);
+
+ if (mxport == NULL)
+ return -ENODEV;
+
+ switch (cmd) {
+ case TIOCGSERIAL:
+ pr_debug("%s - (%d) TIOCGSERIAL", __func__, port->port_number);
+ return mxu1_get_serial_info(mxport,
+ (struct serial_struct __user *)arg);
+
+ case TIOCSSERIAL:
+ pr_debug("%s - (%d) TIOCSSERIAL", __func__, port->port_number);
+ return mxu1_set_serial_info(mxport,
+ (struct serial_struct __user *)arg);
+
+ case TIOCMIWAIT:
+ pr_debug("%s - (%d) TIOCMIWAIT", __func__, port->port_number);
+ cprev = mxport->mxp_icount;
+ mxport->mxp_msr_wait_flags = 1;
+ while (1) {
+ wait_event_interruptible_timeout
+ (mxport->mxp_msr_wait,
+ (mxport->mxp_msr_wait_flags == 0),
+ MXU1_MSR_WAIT_TIMEOUT);
+
+ if (signal_pending(current))
+ return -ERESTARTSYS;
+ cnow = mxport->mxp_icount;
+ if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
+ cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
+ return -EIO; /* no change => error */
+ if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
+ ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
+ ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
+ ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
+ return 0;
+ }
+ cprev = cnow;
+ }
+ break;
+
+ case TIOCGICOUNT:
+ pr_debug("%s - (%d) TIOCGICOUNT RX=%d, TX=%d",
+ __func__,
+ port->port_number, mxport->mxp_icount.rx,
+ mxport->mxp_icount.tx);
+
+ if (copy_to_user((void __user *)arg,
+ &mxport->mxp_icount,
+ sizeof(mxport->mxp_icount)))
+ return -EFAULT;
+ return 0;
+
+ case MOXA_SET_INTERFACE:
+ pr_debug("%s - port%d MOXA_SET_INTERFACE=%d", __func__,
+ port->port_number, (int)arg);
+
+ if (mxport->mxp_mxdev->mxd_model_name != MXU1_MODEL_1110) {
+ /* UPort 1130, 1150, 1150I */
+ switch (arg) {
+ case MXU1_RS232: /* UPort 1150, 1150I */
+ if (mxport->mxp_mxdev->mxd_model_name
+ == MXU1_MODEL_1130 ||
+ mxport->mxp_mxdev->mxd_model_name
+ == MXU1_MODEL_1131) {
+ return -EINVAL;
+ }
+ mxport->mxp_uart_mode = MXU1_UART_232;
+ break;
+ case MXU1_RS422: /* UPort 1130, 1150, 1150I */
+ case MXU1_RS4854W: /* UPort 1130, 1150, 1150I */
+ mxport->mxp_uart_mode =
+ MXU1_UART_485_RECEIVER_ENABLED;
+ break;
+
+ case MXU1_RS4852W: /* UPort 1130, 1150, 1150I */
+ mxport->mxp_uart_mode =
+ MXU1_UART_485_RECEIVER_DISABLED;
+ break;
+ default:
+ return -EINVAL;
+ }
+ } else { /* UPort 1110 */
+ if (arg != MXU1_RS232)
+ return -EINVAL;
+ }
+
+ mxu1_set_termios(NULL, port, NULL);
+ }
+
+ return -ENOIOCTLCMD;
+}
+
+static int mxu1_tiocmget(struct tty_struct *tty)
+{
+ struct usb_serial_port *port = tty->driver_data;
+
+ struct mxu1_port *mxport = usb_get_serial_port_data(port);
+ unsigned int result;
+ unsigned int msr;
+ unsigned int mcr;
+
+ pr_debug("%s - port %d", __func__, port->port_number);
+
+ if (mxport == NULL)
+ return -ENODEV;
+
+ msr = mxport->mxp_msr;
+ mcr = mxport->mxp_shadow_mcr;
+
+ result = ((mcr & MXU1_MCR_DTR) ? TIOCM_DTR : 0)
+ | ((mcr & MXU1_MCR_RTS) ? TIOCM_RTS : 0)
+ | ((mcr & MXU1_MCR_LOOP) ? TIOCM_LOOP : 0)
+ | ((msr & MXU1_MSR_CTS) ? TIOCM_CTS : 0)
+ | ((msr & MXU1_MSR_CD) ? TIOCM_CAR : 0)
+ | ((msr & MXU1_MSR_RI) ? TIOCM_RI : 0)
+ | ((msr & MXU1_MSR_DSR) ? TIOCM_DSR : 0);
+
+ pr_debug("%s - 0x%04X", __func__, result);
+
+ return result;
+}
+
+static int mxu1_tiocmset(struct tty_struct *tty,
+ unsigned int set, unsigned int clear)
+{
+ struct usb_serial_port *port = tty->driver_data;
+
+ struct mxu1_port *mxport = usb_get_serial_port_data(port);
+ unsigned int mcr;
+
+ pr_debug("%s - port %d", __func__, port->port_number);
+
+ if (mxport == NULL)
+ return -ENODEV;
+
+ mcr = mxport->mxp_shadow_mcr;
+
+ if (set & TIOCM_RTS)
+ mcr |= MXU1_MCR_RTS;
+ if (set & TIOCM_DTR)
+ mcr |= MXU1_MCR_DTR;
+ if (set & TIOCM_LOOP)
+ mcr |= MXU1_MCR_LOOP;
+
+ if (clear & TIOCM_RTS)
+ mcr &= ~MXU1_MCR_RTS;
+ if (clear & TIOCM_DTR)
+ mcr &= ~MXU1_MCR_DTR;
+ if (clear & TIOCM_LOOP)
+ mcr &= ~MXU1_MCR_LOOP;
+
+ return mxu1_set_mcr(mxport, mcr);
+}
+
+static int mxu1_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct mxu1_port *mxport = usb_get_serial_port_data(port);
+ struct async_icount cnow = mxport->mxp_icount;
+
+ pr_debug("%s - (%d) TIOCGICOUNT RX=%d, TX=%d",
+ __func__, port->port_number,
+ cnow.rx, cnow.tx);
+
+ icount->cts = cnow.cts;
+ icount->dsr = cnow.dsr;
+ icount->rng = cnow.rng;
+ icount->dcd = cnow.dcd;
+ icount->rx = cnow.rx;
+ icount->tx = cnow.tx;
+ icount->frame = cnow.frame;
+ icount->overrun = cnow.overrun;
+ icount->parity = cnow.parity;
+ icount->brk = cnow.brk;
+ icount->buf_overrun = cnow.buf_overrun;
+
+ return 0;
+}
+
+static void mxu1_throttle(struct tty_struct *tty)
+{
+ struct usb_serial_port *port = tty->driver_data;
+
+ struct mxu1_port *mxport = usb_get_serial_port_data(port);
+
+ pr_debug("%s - port %d", __func__, port->port_number);
+
+ if (mxport == NULL)
+ return;
+
+ tty = port->port.tty;
+
+ if (!tty) {
+ pr_debug("%s - no tty", __func__);
+ return;
+ }
+
+ if (I_IXOFF(tty) || C_CRTSCTS(tty))
+ mxu1_stop_read(mxport, tty);
+
+}
+
+static void mxu1_unthrottle(struct tty_struct *tty)
+{
+ struct usb_serial_port *port = tty->driver_data;
+
+ struct mxu1_port *mxport = usb_get_serial_port_data(port);
+
+ int status = 0;
+
+ pr_debug("%s - port %d", __func__, port->port_number);
+
+ if (mxport == NULL)
+ return;
+
+ tty = port->port.tty;
+
+ if (!tty) {
+ pr_debug("%s - no tty", __func__);
+ return;
+ }
+
+ if (I_IXOFF(tty) || C_CRTSCTS(tty)) {
+ status = mxu1_restart_read(mxport, tty);
+ if (status)
+ dev_err(&port->dev, "%s - cannot restart read, %d\n",
+ __func__, status);
+ }
+}
+
+static void mxu1_break(struct tty_struct *tty, int break_state)
+{
+ struct usb_serial_port *port = tty->driver_data;
+
+ struct mxu1_port *mxport = usb_get_serial_port_data(port);
+
+ pr_debug("%s - state = %d", __func__, break_state);
+
+ if (mxport == NULL)
+ return;
+
+ if (break_state == -1)
+ mxport->mxp_send_break = MXU1_LCR_BREAK;
+ else
+ mxport->mxp_send_break = 0;
+
+ mxu1_set_termios(NULL, mxport->mxp_port, NULL);
+}
+
+static int mxu1_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+ struct mxu1_port *mxport = usb_get_serial_port_data(port);
+ struct mxu1_device *mxdev;
+ struct usb_device *dev;
+ struct urb *urb;
+ int port_number;
+ int status;
+ __u16 open_settings = (__u8)(MXU1_PIPE_MODE_CONTINUOUS |
+ MXU1_PIPE_TIMEOUT_ENABLE |
+ (MXU1_TRANSFER_TIMEOUT << 2));
+ if (!mxport)
+ return -ENODEV;
+
+ dev = port->serial->dev;
+ mxdev = mxport->mxp_mxdev;
+
+ if (port->port.tty)
+ port->port.low_latency = MXU1_DEFAULT_LOW_LATENCY;
+
+ port_number = port->port_number - port->minor;
+
+ mxport->mxp_msr = 0;
+ mxport->mxp_shadow_mcr |= (MXU1_MCR_RTS | MXU1_MCR_DTR);
+
+ if (mutex_lock_interruptible(&mxdev->mxd_lock))
+ return -ERESTARTSYS;
+
+ /* start interrupt urb the first time a port is opened on this device */
+ if (mxdev->mxd_open_port_count == 0) {
+ pr_debug("%s - start interrupt in urb", __func__);
+ urb = mxdev->mxd_serial->port[0]->interrupt_in_urb;
+ if (!urb) {
+ dev_err(&port->dev,
+ "%s - no interrupt urb\n",
+ __func__);
+ status = -EINVAL;
+ goto release_mxd_lock;
+ }
+ urb->context = mxdev;
+ status = usb_submit_urb(urb, GFP_KERNEL);
+ if (status) {
+ dev_err(&port->dev,
+ "%s - submit interrupt urb failed, %d\n",
+ __func__,
+ status);
+ goto release_mxd_lock;
+ }
+ }
+
+ mxu1_set_termios(NULL, port, NULL);
+
+ pr_debug("%s - sending MXU1_OPEN_PORT", __func__);
+ status = mxu1_send_ctrl_urb(mxdev->mxd_serial, MXU1_OPEN_PORT,
+ open_settings,
+ (__u8)(MXU1_UART1_PORT + port_number));
+ if (status) {
+ dev_err(&port->dev, "%s - cannot send open command, %d\n",
+ __func__,
+ status);
+ goto unlink_int_urb;
+ }
+
+ pr_debug("%s - sending MXU1_START_PORT", __func__);
+ status = mxu1_send_ctrl_urb(mxdev->mxd_serial, MXU1_START_PORT,
+ 0, (__u8)(MXU1_UART1_PORT + port_number));
+ if (status) {
+ dev_err(&port->dev, "%s - cannot send start command, %d\n",
+ __func__,
+ status);
+ goto unlink_int_urb;
+ }
+
+ pr_debug("%s - sending MXU1_PURGE_PORT", __func__);
+ status = mxu1_send_ctrl_urb(mxdev->mxd_serial, MXU1_PURGE_PORT,
+ MXU1_PURGE_INPUT,
+ (__u8)(MXU1_UART1_PORT + port_number));
+ if (status) {
+ dev_err(&port->dev,
+ "%s - cannot clear input buffers, %d\n",
+ __func__,
+ status);
+
+ goto unlink_int_urb;
+ }
+ status = mxu1_send_ctrl_urb(mxdev->mxd_serial, MXU1_PURGE_PORT,
+ MXU1_PURGE_OUTPUT,
+ (__u8)(MXU1_UART1_PORT + port_number));
+ if (status) {
+ dev_err(&port->dev,
+ "%s - cannot clear output buffers, %d\n",
+ __func__,
+ status);
+
+ goto unlink_int_urb;
+ }
+
+ /* reset the data toggle on the bulk endpoints to work around bug in
+ * host controllers where things get out of sync some times
+ */
+ usb_clear_halt(dev, port->write_urb->pipe);
+ usb_clear_halt(dev, port->read_urb->pipe);
+
+ mxu1_set_termios(NULL, port, NULL);
+
+ pr_debug("%s - sending MXU1_OPEN_PORT (2)", __func__);
+ status = mxu1_send_ctrl_urb(mxdev->mxd_serial, MXU1_OPEN_PORT,
+ open_settings,
+ (__u8)(MXU1_UART1_PORT + port_number));
+ if (status) {
+ dev_err(&port->dev, "%s - cannot send open command, %d\n",
+ __func__,
+ status);
+ goto unlink_int_urb;
+ }
+
+ pr_debug("%s - sending MXU1_START_PORT (2)", __func__);
+ status = mxu1_send_ctrl_urb(mxdev->mxd_serial, MXU1_START_PORT,
+ 0, (__u8)(MXU1_UART1_PORT + port_number));
+ if (status) {
+ dev_err(&port->dev, "%s - cannot send start command, %d\n",
+ __func__,
+ status);
+ goto unlink_int_urb;
+ }
+
+ /* start read urb */
+ pr_debug("%s - start read urb", __func__);
+ urb = port->read_urb;
+
+ if (!urb) {
+ dev_err(&port->dev, "%s - no read urb\n", __func__);
+ status = -EINVAL;
+ goto unlink_int_urb;
+ }
+
+ mxport->mxp_read_urb_state = MXU1_READ_URB_RUNNING;
+ urb->context = mxport;
+ urb->dev = dev;
+ status = usb_submit_urb(urb, GFP_KERNEL);
+
+ if (status) {
+ dev_err(&port->dev, "%s - submit read urb failed, %d\n",
+ __func__, status);
+ goto unlink_int_urb;
+ }
+
+ mxport->mxp_is_open = 1;
+ ++mxdev->mxd_open_port_count;
+
+ goto release_mxd_lock;
+
+unlink_int_urb:
+ if (mxdev->mxd_open_port_count == 0)
+ usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
+
+release_mxd_lock:
+ mutex_unlock(&mxdev->mxd_lock);
+ pr_debug("%s - exit %d", __func__, status);
+
+ return status;
+}
+
+static void mxu1_close(struct usb_serial_port *port)
+{
+ struct mxu1_device *mxdev;
+ struct mxu1_port *mxport;
+ int port_number;
+ unsigned long flags;
+ int status = 0;
+
+ pr_debug("%s - port %d", __func__, port->port_number);
+
+ mxdev = usb_get_serial_data(port->serial);
+ mxport = usb_get_serial_port_data(port);
+ if (mxdev == NULL || mxport == NULL)
+ return;
+
+ mxport->mxp_is_open = 0;
+
+ usb_kill_urb(port->read_urb);
+ usb_kill_urb(port->write_urb);
+
+ mxport->mxp_write_urb_in_use = 0;
+
+ spin_lock_irqsave(&port->lock, flags);
+ kfifo_reset_out(&port->write_fifo);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ port_number = port->port_number - port->minor;
+
+ pr_debug("%s - sending MXU1_CLOSE_PORT", __func__);
+ status = mxu1_send_ctrl_urb(port->serial,
+ MXU1_CLOSE_PORT,
+ 0, (__u8)(MXU1_UART1_PORT + port_number));
+ if (status)
+ dev_err(&port->dev,
+ "%s - cannot send close port command, %d\n",
+ __func__,
+ status);
+
+ mutex_lock(&mxdev->mxd_lock);
+ --mxport->mxp_mxdev->mxd_open_port_count;
+ if (mxport->mxp_mxdev->mxd_open_port_count <= 0) {
+ usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
+
+ mxport->mxp_mxdev->mxd_open_port_count = 0;
+ }
+ mutex_unlock(&mxdev->mxd_lock);
+
+ pr_debug("%s - exit", __func__);
+}
+
+static void mxu1_handle_new_msr(struct mxu1_port *mxport, __u8 msr)
+{
+ struct async_icount *icount;
+ struct tty_struct *tty;
+ unsigned long flags;
+
+ pr_debug("%s - msr 0x%02X", __func__, msr);
+
+ if (msr & MXU1_MSR_DELTA_MASK) {
+ spin_lock_irqsave(&mxport->mxp_lock, flags);
+ icount = &mxport->mxp_icount;
+ if (msr & MXU1_MSR_DELTA_CTS)
+ icount->cts++;
+ if (msr & MXU1_MSR_DELTA_DSR)
+ icount->dsr++;
+ if (msr & MXU1_MSR_DELTA_CD)
+ icount->dcd++;
+ if (msr & MXU1_MSR_DELTA_RI)
+ icount->rng++;
+ if (mxport->mxp_msr_wait_flags == 1) {
+ mxport->mxp_msr_wait_flags = 0;
+ wake_up_interruptible(&mxport->mxp_msr_wait);
+ }
+ spin_unlock_irqrestore(&mxport->mxp_lock, flags);
+ }
+
+ mxport->mxp_msr = msr & MXU1_MSR_MASK;
+
+ /* handle CTS flow control */
+ tty = mxport->mxp_port->port.tty;
+
+ if (tty && C_CRTSCTS(tty)) {
+ if (msr & MXU1_MSR_CTS) {
+ tty->hw_stopped = 0;
+
+ tty_wakeup(tty);
+ } else {
+ tty->hw_stopped = 1;
+ }
+ }
+}
+
+static void mxu1_interrupt_callback(struct urb *urb)
+{
+ struct mxu1_device *mxdev = (struct mxu1_device *)urb->context;
+ struct usb_serial_port *port;
+ struct usb_serial *serial = mxdev->mxd_serial;
+ struct mxu1_port *mxport;
+ struct device *dev = &urb->dev->dev;
+ unsigned char *data = urb->transfer_buffer;
+ int length = urb->actual_length;
+ int port_number;
+ int function;
+ int status = 0;
+ __u8 msr;
+
+ pr_debug("%s", __func__);
+
+ /* Check port is valid or not */
+ if (mxdev == NULL)
+ return;
+
+
+ switch (urb->status) {
+ case 0:
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ pr_debug("%s - urb shutting down, %d", __func__, urb->status);
+ return;
+ default:
+ dev_err(dev, "%s - nonzero urb status, %d\n",
+ __func__, urb->status);
+ goto exit;
+ }
+
+ if (length != 2) {
+ pr_debug("%s - bad packet size, %d", __func__, length);
+ goto exit;
+ }
+
+ if (data[0] == MXU1_CODE_HARDWARE_ERROR) {
+ dev_err(dev, "%s - hardware error, %d\n", __func__, data[1]);
+ goto exit;
+ }
+
+ port_number = MXU1_GET_PORT_FROM_CODE(data[0]);
+ function = MXU1_GET_FUNC_FROM_CODE(data[0]);
+
+ pr_debug("%s - port_number %d, function %d, data 0x%02X",
+ __func__,
+ port_number,
+ function,
+ data[1]);
+
+ if (port_number >= serial->num_ports) {
+ dev_err(dev, "%s - bad port number, %d\n",
+ __func__, port_number);
+ goto exit;
+ }
+
+ port = serial->port[port_number];
+
+ mxport = usb_get_serial_port_data(port);
+ if (!mxport)
+ goto exit;
+
+ switch (function) {
+ case MXU1_CODE_DATA_ERROR:
+ pr_debug("%s - DATA ERROR, port %d, data 0x%02X\n",
+ __func__,
+ port_number,
+ data[1]);
+ break;
+
+ case MXU1_CODE_MODEM_STATUS:
+ msr = data[1];
+ pr_debug("%s - port %d, msr 0x%02X",
+ __func__, port_number, msr);
+ mxu1_handle_new_msr(mxport, msr);
+ break;
+
+ default:
+ dev_err(dev, "%s - unknown interrupt code, 0x%02X\n",
+ __func__, data[1]);
+ break;
+ }
+
+exit:
+ status = usb_submit_urb(urb, GFP_ATOMIC);
+ if (status)
+ dev_err(dev, "%s - resubmit interrupt urb failed, %d\n",
+ __func__, status);
+}
+
+static void mxu1_bulk_in_callback(struct urb *urb)
+{
+ struct mxu1_port *mxport = (struct mxu1_port *)urb->context;
+ struct usb_serial_port *port = mxport->mxp_port;
+ struct device *dev = &urb->dev->dev;
+ int status = 0;
+
+ pr_debug("%s", __func__);
+
+ /*Check port is valid or not*/
+ if (mxport == NULL)
+ return;
+
+ switch (urb->status) {
+ case 0:
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ pr_debug("%s - urb shutting down, %d", __func__, urb->status);
+ return;
+ default:
+ dev_err(dev, "%s - nonzero urb status, %d\n",
+ __func__, urb->status);
+ }
+
+ if (urb->status == -EPIPE)
+ goto exit;
+
+ if (urb->status) {
+ dev_err(dev, "%s - stopping read!\n", __func__);
+ return;
+ }
+ if (port->port.tty && urb->actual_length) {
+
+ usb_serial_debug_data(dev, __func__,
+ urb->actual_length, urb->transfer_buffer);
+
+ if (!mxport->mxp_is_open)
+ pr_debug("%s - port closed, dropping data", __func__);
+ else
+ mxu1_recv(mxport,
+ urb->transfer_buffer, urb->actual_length);
+
+ spin_lock(&mxport->mxp_lock);
+ mxport->mxp_icount.rx += urb->actual_length;
+ spin_unlock(&mxport->mxp_lock);
+ }
+
+exit:
+ /* continue to read unless stopping */
+ spin_lock(&mxport->mxp_lock);
+ if (mxport->mxp_read_urb_state == MXU1_READ_URB_RUNNING) {
+ urb->dev = port->serial->dev;
+ status = usb_submit_urb(urb, GFP_ATOMIC);
+ } else if (mxport->mxp_read_urb_state == MXU1_READ_URB_STOPPING) {
+ mxport->mxp_read_urb_state = MXU1_READ_URB_STOPPED;
+ }
+ spin_unlock(&mxport->mxp_lock);
+ if (status)
+ dev_err(dev, "%s - resubmit read urb failed, %d\n",
+ __func__, status);
+}
+
+
+static void mxu1_bulk_out_callback(struct urb *urb)
+{
+ struct mxu1_port *mxport = (struct mxu1_port *)urb->context;
+ struct usb_serial_port *port = mxport->mxp_port;
+
+ pr_debug("%s - port %d", __func__, port->port_number);
+
+ /* Check port is valid or not */
+ if (mxport == NULL)
+ return;
+
+ mxport->mxp_write_urb_in_use = 0;
+
+ switch (urb->status) {
+ case 0:
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ pr_debug("%s - urb shutting down, %d", __func__, urb->status);
+ return;
+ default:
+ dev_err_console(port, "%s - nonzero urb status, %d\n",
+ __func__, urb->status);
+ }
+
+ /* send any buffered data */
+ mxu1_send(mxport);
+}
+
+static void mxu1_send(struct mxu1_port *mxport)
+{
+ int count, result;
+ struct usb_serial_port *port = mxport->mxp_port;
+
+ struct tty_struct *tty = port->port.tty;
+
+ unsigned long flags;
+
+ pr_debug("%s - port %d", __func__, port->port_number);
+
+ spin_lock_irqsave(&mxport->mxp_lock, flags);
+
+ if (mxport->mxp_write_urb_in_use) {
+ spin_unlock_irqrestore(&mxport->mxp_lock, flags);
+ return;
+ }
+
+ count = kfifo_out(&port->write_fifo,
+ port->write_urb->transfer_buffer,
+ port->bulk_out_size);
+
+ if (count == 0) {
+ spin_unlock_irqrestore(&mxport->mxp_lock, flags);
+ return;
+ }
+
+ mxport->mxp_write_urb_in_use = 1;
+
+ spin_unlock_irqrestore(&mxport->mxp_lock, flags);
+
+ usb_serial_debug_data(&port->dev,
+ __func__,
+ count,
+ port->write_urb->transfer_buffer);
+
+ usb_fill_bulk_urb(port->write_urb, port->serial->dev,
+ usb_sndbulkpipe(port->serial->dev,
+ port->bulk_out_endpointAddress),
+ port->write_urb->transfer_buffer, count,
+ mxu1_bulk_out_callback, mxport);
+
+ result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+ if (result) {
+ dev_err_console(port, "%s - submit write urb failed, %d\n",
+ __func__, result);
+
+ mxport->mxp_write_urb_in_use = 0;
+ } else {
+ spin_lock_irqsave(&mxport->mxp_lock, flags);
+ mxport->mxp_icount.tx += count;
+ spin_unlock_irqrestore(&mxport->mxp_lock, flags);
+ }
+
+ /* more room in the buffer for new writes, wakeup */
+ if (tty)
+ tty_wakeup(tty);
+}
+
+static int mxu1_write(struct tty_struct *tty,
+ struct usb_serial_port *port,
+ const unsigned char *data,
+ int count)
+{
+ struct mxu1_port *mxport = usb_get_serial_port_data(port);
+
+ pr_debug("%s - port %d", __func__, port->port_number);
+
+ if (count == 0) {
+ pr_debug("%s - write request of 0 bytes", __func__);
+ return 0;
+ }
+
+ if (mxport == NULL || !mxport->mxp_is_open)
+ return -ENODEV;
+
+ count = kfifo_in_locked(&port->write_fifo, data, count,
+ &mxport->mxp_lock);
+ mxu1_send(mxport);
+
+ return count;
+}
+
+static void mxu1_recv(struct mxu1_port *mxport,
+ unsigned char *data, int length)
+{
+ int queued;
+ struct tty_struct *tty;
+
+ tty = mxport->mxp_port->port.tty;
+
+ queued = tty_insert_flip_string(tty->port, data, length);
+ if (queued < length)
+ dev_err(&mxport->mxp_port->dev,
+ "%s - dropping data, %d bytes lost\n",
+ __func__, length - queued);
+ tty_flip_buffer_push(tty->port);
+}
+
+static struct usb_serial_driver mxuport11_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "mxuport11",
+ },
+ .description = "MOXA UPort 11x0",
+ .id_table = mxuport11_idtable,
+ .num_ports = 1,
+ .port_probe = mxu1_port_probe,
+ .attach = mxu1_startup,
+ .open = mxu1_open,
+ .close = mxu1_close,
+ .ioctl = mxu1_ioctl,
+ .throttle = mxu1_throttle,
+ .unthrottle = mxu1_unthrottle,
+ .set_termios = mxu1_set_termios,
+ .tiocmget = mxu1_tiocmget,
+ .tiocmset = mxu1_tiocmset,
+ .get_icount = mxu1_get_icount,
+ .write = mxu1_write,
+ .break_ctl = mxu1_break,
+ .read_int_callback = mxu1_interrupt_callback,
+ .read_bulk_callback = mxu1_bulk_in_callback,
+ .write_bulk_callback = mxu1_bulk_out_callback
+
+};
+
+static struct usb_serial_driver *const serial_drivers[] = {
+ &mxuport11_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, mxuport11_idtable);
+
+MODULE_AUTHOR("Ken Huang");
+MODULE_AUTHOR("Mathieu Othacehe <m.othacehe@xxxxxxxxx>");
+MODULE_DESCRIPTION("MOXA UPort 11x0 USB to Serial Hub Driver");
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("moxa/moxa-1110.fw");
+MODULE_FIRMWARE("moxa/moxa-1130.fw");
+MODULE_FIRMWARE("moxa/moxa-1131.fw");
+MODULE_FIRMWARE("moxa/moxa-1150.fw");
+MODULE_FIRMWARE("moxa/moxa-1151.fw");
+
+
+module_param(closing_wait, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(closing_wait, "Maximum wait for data to drain, in .01 secs");
diff --git a/drivers/usb/serial/mxu11x0.h b/drivers/usb/serial/mxu11x0.h
new file mode 100644
index 0000000..6c7ac10
--- /dev/null
+++ b/drivers/usb/serial/mxu11x0.h
@@ -0,0 +1,199 @@
+#ifndef _MXU11X0_H_
+#define _MXU11X0_H_
+
+/* Vendor and product ids */
+#define MXU1_VENDOR_ID 0x110a
+#define MXU1_1110_PRODUCT_ID 0x1110
+#define MXU1_1130_PRODUCT_ID 0x1130
+#define MXU1_1150_PRODUCT_ID 0x1150
+#define MXU1_1151_PRODUCT_ID 0x1151
+#define MXU1_1131_PRODUCT_ID 0x1131
+
+/* Model Name */
+#define MXU1_MODEL_1110 0x01
+#define MXU1_MODEL_1130 0x02
+#define MXU1_MODEL_1150 0x03
+#define MXU1_MODEL_1151 0x04
+#define MXU1_MODEL_1131 0x05
+
+/* Commands */
+#define MXU1_GET_VERSION 0x01
+#define MXU1_GET_PORT_STATUS 0x02
+#define MXU1_GET_PORT_DEV_INFO 0x03
+#define MXU1_GET_CONFIG 0x04
+#define MXU1_SET_CONFIG 0x05
+#define MXU1_OPEN_PORT 0x06
+#define MXU1_CLOSE_PORT 0x07
+#define MXU1_START_PORT 0x08
+#define MXU1_STOP_PORT 0x09
+#define MXU1_TEST_PORT 0x0A
+#define MXU1_PURGE_PORT 0x0B
+#define MXU1_RESET_EXT_DEVICE 0x0C
+#define MXU1_GET_OUTQUEUE 0x0D
+#define MXU1_WRITE_DATA 0x80
+#define MXU1_READ_DATA 0x81
+#define MXU1_REQ_TYPE_CLASS 0x82
+
+/* Module identifiers */
+#define MXU1_I2C_PORT 0x01
+#define MXU1_IEEE1284_PORT 0x02
+#define MXU1_UART1_PORT 0x03
+#define MXU1_UART2_PORT 0x04
+#define MXU1_RAM_PORT 0x05
+
+/* Modem status */
+#define MXU1_MSR_DELTA_CTS 0x01
+#define MXU1_MSR_DELTA_DSR 0x02
+#define MXU1_MSR_DELTA_RI 0x04
+#define MXU1_MSR_DELTA_CD 0x08
+#define MXU1_MSR_CTS 0x10
+#define MXU1_MSR_DSR 0x20
+#define MXU1_MSR_RI 0x40
+#define MXU1_MSR_CD 0x80
+#define MXU1_MSR_DELTA_MASK 0x0F
+#define MXU1_MSR_MASK 0xF0
+
+/* Line status */
+#define MXU1_LSR_OVERRUN_ERROR 0x01
+#define MXU1_LSR_PARITY_ERROR 0x02
+#define MXU1_LSR_FRAMING_ERROR 0x04
+#define MXU1_LSR_BREAK 0x08
+#define MXU1_LSR_ERROR 0x0F
+#define MXU1_LSR_RX_FULL 0x10
+#define MXU1_LSR_TX_EMPTY 0x20
+
+/* Line control */
+#define MXU1_LCR_BREAK 0x40
+
+/* Modem control */
+#define MXU1_MCR_LOOP 0x04
+#define MXU1_MCR_DTR 0x10
+#define MXU1_MCR_RTS 0x20
+
+/* Mask settings */
+#define MXU1_UART_ENABLE_RTS_IN 0x0001
+#define MXU1_UART_DISABLE_RTS 0x0002
+#define MXU1_UART_ENABLE_PARITY_CHECKING 0x0008
+#define MXU1_UART_ENABLE_DSR_OUT 0x0010
+#define MXU1_UART_ENABLE_CTS_OUT 0x0020
+#define MXU1_UART_ENABLE_X_OUT 0x0040
+#define MXU1_UART_ENABLE_XA_OUT 0x0080
+#define MXU1_UART_ENABLE_X_IN 0x0100
+#define MXU1_UART_ENABLE_DTR_IN 0x0800
+#define MXU1_UART_DISABLE_DTR 0x1000
+#define MXU1_UART_ENABLE_MS_INTS 0x2000
+#define MXU1_UART_ENABLE_AUTO_START_DMA 0x4000
+#define MXU1_UART_SEND_BREAK_SIGNAL 0x8000
+
+/* Parity */
+#define MXU1_UART_NO_PARITY 0x00
+#define MXU1_UART_ODD_PARITY 0x01
+#define MXU1_UART_EVEN_PARITY 0x02
+#define MXU1_UART_MARK_PARITY 0x03
+#define MXU1_UART_SPACE_PARITY 0x04
+
+/* Stop bits */
+#define MXU1_UART_1_STOP_BITS 0x00
+#define MXU1_UART_1_5_STOP_BITS 0x01
+#define MXU1_UART_2_STOP_BITS 0x02
+
+/* Bits per character */
+#define MXU1_UART_5_DATA_BITS 0x00
+#define MXU1_UART_6_DATA_BITS 0x01
+#define MXU1_UART_7_DATA_BITS 0x02
+#define MXU1_UART_8_DATA_BITS 0x03
+
+/* Operation modes */
+#define MXU1_UART_232 0x00
+#define MXU1_UART_485_RECEIVER_DISABLED 0x01
+#define MXU1_UART_485_RECEIVER_ENABLED 0x02
+#define MXU1_RS232 0
+#define MXU1_RS4852W 1
+#define MXU1_RS422 2
+#define MXU1_RS4854W 3
+
+/* Pipe transfer mode and timeout */
+#define MXU1_PIPE_MODE_CONTINUOUS 0x01
+#define MXU1_PIPE_MODE_MASK 0x03
+#define MXU1_PIPE_TIMEOUT_MASK 0x7C
+#define MXU1_PIPE_TIMEOUT_ENABLE 0x80
+
+/* User define ioctl */
+#define MOXA 404
+#define MOXA_SET_INTERFACE (MOXA + 1)
+
+/* Config struct */
+struct mxu1_uart_config {
+ __u16 wBaudRate;
+ __u16 wFlags;
+ __u8 bDataBits;
+ __u8 bParity;
+ __u8 bStopBits;
+ char cXon;
+ char cXoff;
+ __u8 bUartMode;
+} __packed;
+
+/* Purge modes */
+#define MXU1_PURGE_OUTPUT 0x00
+#define MXU1_PURGE_INPUT 0x80
+
+/* Read/Write data */
+#define MXU1_RW_DATA_ADDR_SFR 0x10
+#define MXU1_RW_DATA_ADDR_IDATA 0x20
+#define MXU1_RW_DATA_ADDR_XDATA 0x30
+#define MXU1_RW_DATA_ADDR_CODE 0x40
+#define MXU1_RW_DATA_ADDR_GPIO 0x50
+#define MXU1_RW_DATA_ADDR_I2C 0x60
+#define MXU1_RW_DATA_ADDR_FLASH 0x70
+#define MXU1_RW_DATA_ADDR_DSP 0x80
+
+#define MXU1_RW_DATA_UNSPECIFIED 0x00
+#define MXU1_RW_DATA_BYTE 0x01
+#define MXU1_RW_DATA_WORD 0x02
+#define MXU1_RW_DATA_DOUBLE_WORD 0x04
+
+struct mxu1_write_data_bytes {
+ __u8 bAddrType;
+ __u8 bDataType;
+ __u8 bDataCounter;
+#ifdef __CHECK_ENDIAN__
+ __be16 wBaseAddrHi;
+ __be16 wBaseAddrLo;
+#else
+ __u16 wBaseAddrHi;
+ __u16 wBaseAddrLo;
+#endif
+ __u8 bData[0];
+} __packed;
+
+/* Interrupt codes */
+#define MXU1_GET_PORT_FROM_CODE(c) (((c) >> 4) - 3)
+#define MXU1_GET_FUNC_FROM_CODE(c) ((c) & 0x0f)
+#define MXU1_CODE_HARDWARE_ERROR 0xFF
+#define MXU1_CODE_DATA_ERROR 0x03
+#define MXU1_CODE_MODEM_STATUS 0x04
+
+/* Download firmware max packet size */
+#define MXU1_DOWNLOAD_MAX_PACKET_SIZE 64
+
+/* Firmware image header */
+struct mxu1_firmware_header {
+#ifdef __CHECK_
+ __le16 wLength;
+#else
+ __u16 wLength;
+#endif
+ __u8 bCheckSum;
+} __packed;
+
+/* UART addresses */
+/* UART 1 base address */
+#define MXU1_UART1_BASE_ADDR 0xFFA0
+/* UART 2 base address*/
+#define MXU1_UART2_BASE_ADDR 0xFFB0
+#define MXU1_UART_OFFSET_LCR 0x0002
+/*UART MCR register offset */
+#define MXU1_UART_OFFSET_MCR 0x0004
+
+#endif /* _MXU11X0_H_ */
--
2.5.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/