[PATCH V3 5/6] PM / OPP: Move cpu specific code to opp/cpu.c

From: Viresh Kumar
Date: Fri Sep 04 2015 - 04:19:08 EST

Move cpu device specific code out of generic opp library, and add it to
cpu.c.

Along with that, create a core-internal opp.h header, which will be used
to share structures and function prototypes within opp core.

Reviewed-by: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
---
drivers/base/power/opp/core.c | 276 +-----------------------------------------
drivers/base/power/opp/cpu.c | 160 +++++++++++++++++++++++-
drivers/base/power/opp/opp.h | 143 ++++++++++++++++++++++
3 files changed, 304 insertions(+), 275 deletions(-)
create mode 100644 drivers/base/power/opp/opp.h

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index f42ffa517156..f475deb4170b 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -11,131 +11,14 @@
* published by the Free Software Foundation.
*/

-#include <linux/cpu.h>
-#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/rculist.h>
-#include <linux/rcupdate.h>
-#include <linux/pm_opp.h>
#include <linux/of.h>
#include <linux/export.h>

-/*
- * Internal data structure organization with the OPP layer library is as
- * follows:
- * dev_opp_list (root)
- * |- device 1 (represents voltage domain 1)
- * | |- opp 1 (availability, freq, voltage)
- * | |- opp 2 ..
- * ... ...
- * | `- opp n ..
- * |- device 2 (represents the next voltage domain)
- * ...
- * `- device m (represents mth voltage domain)
- * device 1, 2.. are represented by dev_opp structure while each opp
- * is represented by the opp structure.
- */
-
-/**
- * struct dev_pm_opp - Generic OPP description structure
- * @node: opp list node. The nodes are maintained throughout the lifetime
- * of boot. It is expected only an optimal set of OPPs are
- * added to the library by the SoC framework.
- * RCU usage: opp list is traversed with RCU locks. node
- * modification is possible realtime, hence the modifications
- * are protected by the dev_opp_list_lock for integrity.
- * IMPORTANT: the opp nodes should be maintained in increasing
- * order.
- * @dynamic: not-created from static DT entries.
- * @available: true/false - marks if this OPP as available or not
- * @turbo: true if turbo (boost) OPP
- * @rate: Frequency in hertz
- * @u_volt: Target voltage in microvolts corresponding to this OPP
- * @u_volt_min: Minimum voltage in microvolts corresponding to this OPP
- * @u_volt_max: Maximum voltage in microvolts corresponding to this OPP
- * @u_amp: Maximum current drawn by the device in microamperes
- * @clock_latency_ns: Latency (in nanoseconds) of switching to this OPP's
- * frequency from any other OPP's frequency.
- * @dev_opp: points back to the device_opp struct this opp belongs to
- * @rcu_head: RCU callback head used for deferred freeing
- * @np: OPP's device node.
- *
- * This structure stores the OPP information for a given device.
- */
-struct dev_pm_opp {
- struct list_head node;
-
- bool available;
- bool dynamic;
- bool turbo;
- unsigned long rate;
-
- unsigned long u_volt;
- unsigned long u_volt_min;
- unsigned long u_volt_max;
- unsigned long u_amp;
- unsigned long clock_latency_ns;
-
- struct device_opp *dev_opp;
- struct rcu_head rcu_head;
-
- struct device_node *np;
-};
-
-/**
- * struct device_list_opp - devices managed by 'struct device_opp'
- * @node: list node
- * @dev: device to which the struct object belongs
- * @rcu_head: RCU callback head used for deferred freeing
- *
- * This is an internal data structure maintaining the list of devices that are
- * managed by 'struct device_opp'.
- */
-struct device_list_opp {
- struct list_head node;
- const struct device *dev;
- struct rcu_head rcu_head;
-};
-
-/**
- * struct device_opp - Device opp structure
- * @node: list node - contains the devices with OPPs that
- * have been registered. Nodes once added are not modified in this
- * list.
- * RCU usage: nodes are not modified in the list of device_opp,
- * however addition is possible and is secured by dev_opp_list_lock
- * @srcu_head: notifier head to notify the OPP availability changes.
- * @rcu_head: RCU callback head used for deferred freeing
- * @dev_list: list of devices that share these OPPs
- * @opp_list: list of opps
- * @np: struct device_node pointer for opp's DT node.
- * @shared_opp: OPP is shared between multiple devices.
- *
- * This is an internal data structure maintaining the link to opps attached to
- * a device. This structure is not meant to be shared to users as it is
- * meant for book keeping and private to OPP library.
- *
- * Because the opp structures can be used from both rcu and srcu readers, we
- * need to wait for the grace period of both of them before freeing any
- * resources. And so we have used kfree_rcu() from within call_srcu() handlers.
- */
-struct device_opp {
- struct list_head node;
-
- struct srcu_notifier_head srcu_head;
- struct rcu_head rcu_head;
- struct list_head dev_list;
- struct list_head opp_list;
-
- struct device_node *np;
- unsigned long clock_latency_ns_max;
- bool shared_opp;
- struct dev_pm_opp *suspend_opp;
-};
+#include "opp.h"

/*
* The root of the list of all devices. All device_opp structures branch off
@@ -200,7 +83,7 @@ static struct device_opp *_managed_opp(const struct device_node *np)
* is a RCU protected pointer. This means that device_opp is valid as long
* as we are under RCU lock.
*/
-static struct device_opp *_find_device_opp(struct device *dev)
+struct device_opp *_find_device_opp(struct device *dev)
{
struct device_opp *dev_opp;

@@ -551,8 +434,8 @@ static void _remove_list_dev(struct device_list_opp *list_dev,
_kfree_list_dev_rcu);
}

-static struct device_list_opp *_add_list_dev(const struct device *dev,
- struct device_opp *dev_opp)
+struct device_list_opp *_add_list_dev(const struct device *dev,
+ struct device_opp *dev_opp)
{
struct device_list_opp *list_dev;

@@ -1234,28 +1117,8 @@ void dev_pm_opp_of_remove_table(struct device *dev)
}
EXPORT_SYMBOL_GPL(dev_pm_opp_of_remove_table);

-void dev_pm_opp_of_cpumask_remove_table(cpumask_var_t cpumask)
-{
- struct device *cpu_dev;
- int cpu;
-
- WARN_ON(cpumask_empty(cpumask));
-
- for_each_cpu(cpu, cpumask) {
- cpu_dev = get_cpu_device(cpu);
- if (!cpu_dev) {
- pr_err("%s: failed to get cpu%d device\n", __func__,
- cpu);
- continue;
- }
-
- dev_pm_opp_of_remove_table(cpu_dev);
- }
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_remove_table);
-
/* Returns opp descriptor node for a device, caller must do of_node_put() */
-static struct device_node *_of_get_opp_desc_node(struct device *dev)
+struct device_node *_of_get_opp_desc_node(struct device *dev)
{
/*
* TODO: Support for multiple OPP tables.
@@ -1399,133 +1262,4 @@ int dev_pm_opp_of_add_table(struct device *dev)
return ret;
}
EXPORT_SYMBOL_GPL(dev_pm_opp_of_add_table);
-
-int dev_pm_opp_of_cpumask_add_table(cpumask_var_t cpumask)
-{
- struct device *cpu_dev;
- int cpu, ret = 0;
-
- WARN_ON(cpumask_empty(cpumask));
-
- for_each_cpu(cpu, cpumask) {
- cpu_dev = get_cpu_device(cpu);
- if (!cpu_dev) {
- pr_err("%s: failed to get cpu%d device\n", __func__,
- cpu);
- continue;
- }
-
- ret = dev_pm_opp_of_add_table(cpu_dev);
- if (ret) {
- pr_err("%s: couldn't find opp table for cpu:%d, %d\n",
- __func__, cpu, ret);
-
- /* Free all other OPPs */
- dev_pm_opp_of_cpumask_remove_table(cpumask);
- break;
- }
- }
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_add_table);
-
-/* Required only for V1 bindings, as v2 can manage it from DT itself */
-int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
-{
- struct device_list_opp *list_dev;
- struct device_opp *dev_opp;
- struct device *dev;
- int cpu, ret = 0;
-
- rcu_read_lock();
-
- dev_opp = _find_device_opp(cpu_dev);
- if (IS_ERR(dev_opp)) {
- ret = -EINVAL;
- goto out_rcu_read_unlock;
- }
-
- for_each_cpu(cpu, cpumask) {
- if (cpu == cpu_dev->id)
- continue;
-
- dev = get_cpu_device(cpu);
- if (!dev) {
- dev_err(cpu_dev, "%s: failed to get cpu%d device\n",
- __func__, cpu);
- continue;
- }
-
- list_dev = _add_list_dev(dev, dev_opp);
- if (!list_dev) {
- dev_err(dev, "%s: failed to add list-dev for cpu%d device\n",
- __func__, cpu);
- continue;
- }
- }
-out_rcu_read_unlock:
- rcu_read_unlock();
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_set_sharing_cpus);
-
-/*
- * Works only for OPP v2 bindings.
- *
- * cpumask should be already set to mask of cpu_dev->id.
- * Returns -ENOENT if operating-points-v2 bindings aren't supported.
- */
-int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
-{
- struct device_node *np, *tmp_np;
- struct device *tcpu_dev;
- int cpu, ret = 0;
-
- /* Get OPP descriptor node */
- np = _of_get_opp_desc_node(cpu_dev);
- if (!np) {
- dev_dbg(cpu_dev, "%s: Couldn't find opp node: %ld\n", __func__,
- PTR_ERR(np));
- return -ENOENT;
- }
-
- /* OPPs are shared ? */
- if (!of_property_read_bool(np, "opp-shared"))
- goto put_cpu_node;
-
- for_each_possible_cpu(cpu) {
- if (cpu == cpu_dev->id)
- continue;
-
- tcpu_dev = get_cpu_device(cpu);
- if (!tcpu_dev) {
- dev_err(cpu_dev, "%s: failed to get cpu%d device\n",
- __func__, cpu);
- ret = -ENODEV;
- goto put_cpu_node;
- }
-
- /* Get OPP descriptor node */
- tmp_np = _of_get_opp_desc_node(tcpu_dev);
- if (!tmp_np) {
- dev_err(tcpu_dev, "%s: Couldn't find opp node: %ld\n",
- __func__, PTR_ERR(tmp_np));
- ret = PTR_ERR(tmp_np);
- goto put_cpu_node;
- }
-
- /* CPUs are sharing opp node */
- if (np == tmp_np)
- cpumask_set_cpu(cpu, cpumask);
-
- of_node_put(tmp_np);
- }
-
-put_cpu_node:
- of_node_put(np);
- return ret;
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_of_get_sharing_cpus);
#endif
diff --git a/drivers/base/power/opp/cpu.c b/drivers/base/power/opp/cpu.c
index 0dd033016e9d..3d946b508a13 100644
--- a/drivers/base/power/opp/cpu.c
+++ b/drivers/base/power/opp/cpu.c
@@ -10,17 +10,18 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/cpu.h>
#include <linux/cpufreq.h>
-#include <linux/device.h>
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/pm_opp.h>
-#include <linux/rcupdate.h>
+#include <linux/of.h>
#include <linux/slab.h>

+#include "opp.h"
+
#ifdef CONFIG_CPU_FREQ
+
/**
* dev_pm_opp_init_cpufreq_table() - create a cpufreq table for a device
* @dev: device for which we do this operation
@@ -114,3 +115,154 @@ void dev_pm_opp_free_cpufreq_table(struct device *dev,
}
EXPORT_SYMBOL_GPL(dev_pm_opp_free_cpufreq_table);
#endif /* CONFIG_CPU_FREQ */
+
+/* Required only for V1 bindings, as v2 can manage it from DT itself */
+int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
+{
+ struct device_list_opp *list_dev;
+ struct device_opp *dev_opp;
+ struct device *dev;
+ int cpu, ret = 0;
+
+ rcu_read_lock();
+
+ dev_opp = _find_device_opp(cpu_dev);
+ if (IS_ERR(dev_opp)) {
+ ret = -EINVAL;
+ goto out_rcu_read_unlock;
+ }
+
+ for_each_cpu(cpu, cpumask) {
+ if (cpu == cpu_dev->id)
+ continue;
+
+ dev = get_cpu_device(cpu);
+ if (!dev) {
+ dev_err(cpu_dev, "%s: failed to get cpu%d device\n",
+ __func__, cpu);
+ continue;
+ }
+
+ list_dev = _add_list_dev(dev, dev_opp);
+ if (!list_dev) {
+ dev_err(dev, "%s: failed to add list-dev for cpu%d device\n",
+ __func__, cpu);
+ continue;
+ }
+ }
+out_rcu_read_unlock:
+ rcu_read_unlock();
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_set_sharing_cpus);
+
+#ifdef CONFIG_OF
+void dev_pm_opp_of_cpumask_remove_table(cpumask_var_t cpumask)
+{
+ struct device *cpu_dev;
+ int cpu;
+
+ WARN_ON(cpumask_empty(cpumask));
+
+ for_each_cpu(cpu, cpumask) {
+ cpu_dev = get_cpu_device(cpu);
+ if (!cpu_dev) {
+ pr_err("%s: failed to get cpu%d device\n", __func__,
+ cpu);
+ continue;
+ }
+
+ dev_pm_opp_of_remove_table(cpu_dev);
+ }
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_remove_table);
+
+int dev_pm_opp_of_cpumask_add_table(cpumask_var_t cpumask)
+{
+ struct device *cpu_dev;
+ int cpu, ret = 0;
+
+ WARN_ON(cpumask_empty(cpumask));
+
+ for_each_cpu(cpu, cpumask) {
+ cpu_dev = get_cpu_device(cpu);
+ if (!cpu_dev) {
+ pr_err("%s: failed to get cpu%d device\n", __func__,
+ cpu);
+ continue;
+ }
+
+ ret = dev_pm_opp_of_add_table(cpu_dev);
+ if (ret) {
+ pr_err("%s: couldn't find opp table for cpu:%d, %d\n",
+ __func__, cpu, ret);
+
+ /* Free all other OPPs */
+ dev_pm_opp_of_cpumask_remove_table(cpumask);
+ break;
+ }
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_add_table);
+
+/*
+ * Works only for OPP v2 bindings.
+ *
+ * cpumask should be already set to mask of cpu_dev->id.
+ * Returns -ENOENT if operating-points-v2 bindings aren't supported.
+ */
+int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
+{
+ struct device_node *np, *tmp_np;
+ struct device *tcpu_dev;
+ int cpu, ret = 0;
+
+ /* Get OPP descriptor node */
+ np = _of_get_opp_desc_node(cpu_dev);
+ if (!np) {
+ dev_dbg(cpu_dev, "%s: Couldn't find opp node: %ld\n", __func__,
+ PTR_ERR(np));
+ return -ENOENT;
+ }
+
+ /* OPPs are shared ? */
+ if (!of_property_read_bool(np, "opp-shared"))
+ goto put_cpu_node;
+
+ for_each_possible_cpu(cpu) {
+ if (cpu == cpu_dev->id)
+ continue;
+
+ tcpu_dev = get_cpu_device(cpu);
+ if (!tcpu_dev) {
+ dev_err(cpu_dev, "%s: failed to get cpu%d device\n",
+ __func__, cpu);
+ ret = -ENODEV;
+ goto put_cpu_node;
+ }
+
+ /* Get OPP descriptor node */
+ tmp_np = _of_get_opp_desc_node(tcpu_dev);
+ if (!tmp_np) {
+ dev_err(tcpu_dev, "%s: Couldn't find opp node: %ld\n",
+ __func__, PTR_ERR(tmp_np));
+ ret = PTR_ERR(tmp_np);
+ goto put_cpu_node;
+ }
+
+ /* CPUs are sharing opp node */
+ if (np == tmp_np)
+ cpumask_set_cpu(cpu, cpumask);
+
+ of_node_put(tmp_np);
+ }
+
+put_cpu_node:
+ of_node_put(np);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_of_get_sharing_cpus);
+#endif
diff --git a/drivers/base/power/opp/opp.h b/drivers/base/power/opp/opp.h
new file mode 100644
index 000000000000..dcb38f78dae4
--- /dev/null
+++ b/drivers/base/power/opp/opp.h
@@ -0,0 +1,143 @@
+/*
+ * Generic OPP Interface
+ *
+ * Copyright (C) 2009-2010 Texas Instruments Incorporated.
+ * Nishanth Menon
+ * Romit Dasgupta
+ * Kevin Hilman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __DRIVER_OPP_H__
+#define __DRIVER_OPP_H__
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/pm_opp.h>
+#include <linux/rculist.h>
+#include <linux/rcupdate.h>
+
+/*
+ * Internal data structure organization with the OPP layer library is as
+ * follows:
+ * dev_opp_list (root)
+ * |- device 1 (represents voltage domain 1)
+ * | |- opp 1 (availability, freq, voltage)
+ * | |- opp 2 ..
+ * ... ...
+ * | `- opp n ..
+ * |- device 2 (represents the next voltage domain)
+ * ...
+ * `- device m (represents mth voltage domain)
+ * device 1, 2.. are represented by dev_opp structure while each opp
+ * is represented by the opp structure.
+ */
+
+/**
+ * struct dev_pm_opp - Generic OPP description structure
+ * @node: opp list node. The nodes are maintained throughout the lifetime
+ * of boot. It is expected only an optimal set of OPPs are
+ * added to the library by the SoC framework.
+ * RCU usage: opp list is traversed with RCU locks. node
+ * modification is possible realtime, hence the modifications
+ * are protected by the dev_opp_list_lock for integrity.
+ * IMPORTANT: the opp nodes should be maintained in increasing
+ * order.
+ * @dynamic: not-created from static DT entries.
+ * @available: true/false - marks if this OPP as available or not
+ * @turbo: true if turbo (boost) OPP
+ * @rate: Frequency in hertz
+ * @u_volt: Target voltage in microvolts corresponding to this OPP
+ * @u_volt_min: Minimum voltage in microvolts corresponding to this OPP
+ * @u_volt_max: Maximum voltage in microvolts corresponding to this OPP
+ * @u_amp: Maximum current drawn by the device in microamperes
+ * @clock_latency_ns: Latency (in nanoseconds) of switching to this OPP's
+ * frequency from any other OPP's frequency.
+ * @dev_opp: points back to the device_opp struct this opp belongs to
+ * @rcu_head: RCU callback head used for deferred freeing
+ * @np: OPP's device node.
+ *
+ * This structure stores the OPP information for a given device.
+ */
+struct dev_pm_opp {
+ struct list_head node;
+
+ bool available;
+ bool dynamic;
+ bool turbo;
+ unsigned long rate;
+
+ unsigned long u_volt;
+ unsigned long u_volt_min;
+ unsigned long u_volt_max;
+ unsigned long u_amp;
+ unsigned long clock_latency_ns;
+
+ struct device_opp *dev_opp;
+ struct rcu_head rcu_head;
+
+ struct device_node *np;
+};
+
+/**
+ * struct device_list_opp - devices managed by 'struct device_opp'
+ * @node: list node
+ * @dev: device to which the struct object belongs
+ * @rcu_head: RCU callback head used for deferred freeing
+ *
+ * This is an internal data structure maintaining the list of devices that are
+ * managed by 'struct device_opp'.
+ */
+struct device_list_opp {
+ struct list_head node;
+ const struct device *dev;
+ struct rcu_head rcu_head;
+};
+
+/**
+ * struct device_opp - Device opp structure
+ * @node: list node - contains the devices with OPPs that
+ * have been registered. Nodes once added are not modified in this
+ * list.
+ * RCU usage: nodes are not modified in the list of device_opp,
+ * however addition is possible and is secured by dev_opp_list_lock
+ * @srcu_head: notifier head to notify the OPP availability changes.
+ * @rcu_head: RCU callback head used for deferred freeing
+ * @dev_list: list of devices that share these OPPs
+ * @opp_list: list of opps
+ * @np: struct device_node pointer for opp's DT node.
+ * @shared_opp: OPP is shared between multiple devices.
+ *
+ * This is an internal data structure maintaining the link to opps attached to
+ * a device. This structure is not meant to be shared to users as it is
+ * meant for book keeping and private to OPP library.
+ *
+ * Because the opp structures can be used from both rcu and srcu readers, we
+ * need to wait for the grace period of both of them before freeing any
+ * resources. And so we have used kfree_rcu() from within call_srcu() handlers.
+ */
+struct device_opp {
+ struct list_head node;
+
+ struct srcu_notifier_head srcu_head;
+ struct rcu_head rcu_head;
+ struct list_head dev_list;
+ struct list_head opp_list;
+
+ struct device_node *np;
+ unsigned long clock_latency_ns_max;
+ bool shared_opp;
+ struct dev_pm_opp *suspend_opp;
+};
+
+/* Routines internal to opp core */
+struct device_opp *_find_device_opp(struct device *dev);
+struct device_list_opp *_add_list_dev(const struct device *dev,
+ struct device_opp *dev_opp);
+struct device_node *_of_get_opp_desc_node(struct device *dev);
+
+#endif /* __DRIVER_OPP_H__ */
--
2.4.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/