[RFC v1 4/4] iio: chemical: add SGX VZ89x VOC sensor support
From: Matt Ranostay
Date: Sat Sep 05 2015 - 01:54:33 EST
Add support for VZ89X sensors VOC and CO2 reporting channels in
ppm/ppb units.
Signed-off-by: Matt Ranostay <mranostay@xxxxxxxxx>
---
.../devicetree/bindings/i2c/trivial-devices.txt | 1 +
drivers/iio/Kconfig | 1 +
drivers/iio/Makefile | 1 +
drivers/iio/chemical/Makefile | 6 +
drivers/iio/chemical/vz89x.c | 237 +++++++++++++++++++++
5 files changed, 246 insertions(+)
create mode 100644 drivers/iio/chemical/Makefile
create mode 100644 drivers/iio/chemical/vz89x.c
diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
index d77d412..a550216 100644
--- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -88,6 +88,7 @@ ricoh,rs5c372b I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
ricoh,rv5c386 I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
ricoh,rv5c387a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
samsung,24ad0xd1 S524AD0XF1 (128K/256K-bit Serial EEPROM for Low Power)
+sgx,vz89x SGX Sensortech VZ89X Sensors
sii,s35390a 2-wire CMOS real-time clock
skyworks,sky81452 Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply
st-micro,24c256 i2c serial eeprom (24cxx)
diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
index 4011eff..9664e9c 100644
--- a/drivers/iio/Kconfig
+++ b/drivers/iio/Kconfig
@@ -61,6 +61,7 @@ config IIO_CONSUMERS_PER_TRIGGER
source "drivers/iio/accel/Kconfig"
source "drivers/iio/adc/Kconfig"
source "drivers/iio/amplifiers/Kconfig"
+source "drivers/iio/chemical/Kconfig"
source "drivers/iio/common/Kconfig"
source "drivers/iio/dac/Kconfig"
source "drivers/iio/frequency/Kconfig"
diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile
index 698afc2..2288684 100644
--- a/drivers/iio/Makefile
+++ b/drivers/iio/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_IIO_KFIFO_BUF) += kfifo_buf.o
obj-y += accel/
obj-y += adc/
obj-y += amplifiers/
+obj-y += chemical/
obj-y += common/
obj-y += dac/
obj-y += gyro/
diff --git a/drivers/iio/chemical/Makefile b/drivers/iio/chemical/Makefile
new file mode 100644
index 0000000..7292f2d
--- /dev/null
+++ b/drivers/iio/chemical/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for IIO chemical sensors
+#
+
+# When adding new entries keep the list in alphabetical order
+obj-$(CONFIG_VZ89X) += vz89x.o
diff --git a/drivers/iio/chemical/vz89x.c b/drivers/iio/chemical/vz89x.c
new file mode 100644
index 0000000..a596a22
--- /dev/null
+++ b/drivers/iio/chemical/vz89x.c
@@ -0,0 +1,237 @@
+/*
+ * vz89x.c - Support for SGX Sensortech MiCS VZ89X VOC sensors
+ *
+ * Copyright (C) 2015 Matt Ranostay <mranostay@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define VZ89X_REG_MEASUREMENT 0x09
+#define VZ89X_REG_MEASUREMENT_SIZE 6
+
+#define VZ89X_VOC_CO2_IDX 0
+#define VZ89X_VOC_SHORT_IDX 1
+#define VZ89X_VOC_TVOC_IDX 2
+#define VZ89X_RESISTANCE_IDX 3
+
+struct vz89x_data {
+ struct i2c_client *client;
+ struct mutex lock;
+ unsigned long last_update;
+
+ u8 buffer[VZ89X_REG_MEASUREMENT_SIZE];
+};
+
+static const struct iio_chan_spec vz89x_channels[] = {
+ {
+ .type = IIO_CONCENTRATION,
+ .channel2 = IIO_MOD_PPM,
+ .modified = 1,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_OFFSET) |
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ .address = VZ89X_VOC_CO2_IDX,
+ .extend_name = "CO2",
+ },
+ {
+ .type = IIO_CONCENTRATION,
+ .info_mask_separate =
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ .address = VZ89X_VOC_SHORT_IDX,
+ .extend_name = "VOC_short",
+ },
+ {
+ .type = IIO_CONCENTRATION,
+ .channel2 = IIO_MOD_PPB,
+ .modified = 1,
+ .info_mask_separate =
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ .address = VZ89X_VOC_TVOC_IDX,
+ .extend_name = "tVOC",
+ },
+ {
+ .type = IIO_RESISTANCE,
+ .info_mask_separate =
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ .address = VZ89X_RESISTANCE_IDX,
+ },
+};
+
+static int vz89x_get_measurement(struct vz89x_data *data)
+{
+ int ret;
+ int i;
+
+ /* sensor can only be polled once a second max per datasheet */
+ if (!time_after(jiffies, data->last_update + HZ))
+ return 0;
+
+ ret = i2c_smbus_write_word_data(data->client,
+ VZ89X_REG_MEASUREMENT, 0);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < VZ89X_REG_MEASUREMENT_SIZE; i++) {
+ ret = i2c_smbus_read_byte(data->client);
+ if (ret < 0)
+ return ret;
+ }
+
+ data->last_update = jiffies;
+
+ return 0;
+}
+
+static int vz89x_get_resistance_reading(struct vz89x_data *data,
+ struct iio_chan_spec const *chan)
+{
+ u8 *buf = &data->buffer[chan->address];
+
+ return buf[0] | ((u16)buf[1] << 8) | ((u16)buf[2] << 16);
+}
+
+static int vz89x_get_channel_scale(struct iio_chan_spec const *chan,
+ int *val, int *val2)
+{
+ int ret = -EINVAL;
+
+ switch (chan->address) {
+ case VZ89X_VOC_CO2_IDX:
+ *val = 1600;
+ *val2 = 229;
+ ret = IIO_VAL_FRACTIONAL;
+ break;
+ case VZ89X_VOC_SHORT_IDX:
+ *val = 0;
+ ret = IIO_VAL_INT;
+ break;
+ case VZ89X_VOC_TVOC_IDX:
+ *val = 1000;
+ *val2 = 229;
+ ret = IIO_VAL_FRACTIONAL;
+ }
+
+ return ret;
+}
+
+static int vz89x_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val,
+ int *val2, long mask)
+{
+ struct vz89x_data *data = iio_priv(indio_dev);
+ int ret = -EINVAL;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&data->lock);
+ ret = vz89x_get_measurement(data);
+
+ if (chan->type == IIO_RESISTANCE)
+ *val = vz89x_get_resistance_reading(data, chan);
+ else
+ *val = data->buffer[chan->address] - 13;
+
+ if (!ret)
+ ret = IIO_VAL_INT;
+
+ mutex_unlock(&data->lock);
+ break;
+ case IIO_CHAN_INFO_SCALE:
+ switch (chan->type) {
+ case IIO_RESISTANCE:
+ *val = 10;
+ ret = IIO_VAL_INT;
+ break;
+ case IIO_CONCENTRATION:
+ ret = vz89x_get_channel_scale(chan, val, val2);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+ break;
+ case IIO_CHAN_INFO_OFFSET:
+ *val = 400;
+ ret = IIO_VAL_INT;
+ break;
+ }
+
+ return ret;
+}
+
+static const struct iio_info vz89x_info = {
+ .driver_module = THIS_MODULE,
+ .read_raw = vz89x_read_raw,
+};
+
+static int vz89x_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct iio_dev *indio_dev;
+ struct vz89x_data *data;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_BYTE))
+ return -ENODEV;
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ data = iio_priv(indio_dev);
+ i2c_set_clientdata(client, indio_dev);
+ data->client = client;
+ data->last_update = jiffies - HZ;
+ mutex_init(&data->lock);
+
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->info = &vz89x_info,
+ indio_dev->name = dev_name(&client->dev);
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ indio_dev->channels = vz89x_channels;
+ indio_dev->num_channels = ARRAY_SIZE(vz89x_channels);
+
+ return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static const struct i2c_device_id vz89x_id[] = {
+ { "vz89x", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, vz89x_id);
+
+static const struct of_device_id vz89x_dt_ids[] = {
+ { .compatible = "sgx,vz89x" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, vz89x_dt_ids);
+
+static struct i2c_driver vz89x_driver = {
+ .driver = {
+ .name = "vz89x",
+ .of_match_table = of_match_ptr(vz89x_dt_ids),
+ },
+ .probe = vz89x_probe,
+ .id_table = vz89x_id,
+};
+module_i2c_driver(vz89x_driver);
+
+MODULE_AUTHOR("Matt Ranostay <mranostay@xxxxxxxxx>");
+MODULE_DESCRIPTION("SGX Sensortech MiCS VZ89X VOC sensors");
+MODULE_LICENSE("GPL v2");
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/