[PATCH v5 4/5] thermal: power_allocator: don't require tzp to be present for the thermal zone

[Javi Merino]

Thermal zones created using thermal_zone_device_create() may not have
tzp.  As the governor gets its parameters from there, allocate it while
the governor is bound to the thermal zone so that it can operate in it.
In this case, tzp is freed when the thermal zone switches to another
governor.

Cc: Zhang Rui <rui.zhang@xxxxxxxxx>
Cc: Eduardo Valentin <edubezval@xxxxxxxxx>
Reviewed-by: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
Signed-off-by: Javi Merino <javi.merino@xxxxxxx>
---

While this would be easier to do by just ignoring the thermal zone if
there was no tzp, I think the approach in this patch provides a more
consistent behavior for the system integrator as it doesn't make a
distinction between thermal zones created with tzp and those that don't.

 drivers/thermal/power_allocator.c | 32 +++++++++++++++++++++++++++-----
 1 file changed, 27 insertions(+), 5 deletions(-)

diff --git a/drivers/thermal/power_allocator.c b/drivers/thermal/power_allocator.c
index 06e954cd81cc..78d589e7e65f 100644
--- a/drivers/thermal/power_allocator.c
+++ b/drivers/thermal/power_allocator.c
@@ -58,6 +58,8 @@ static inline s64 div_frac(s64 x, s64 y)
 
 /**
  * struct power_allocator_params - parameters for the power allocator governor
+ * @allocated_tzp:	whether we have allocated tzp for this thermal zone and
+ *			it needs to be freed on unbind
  * @err_integral:	accumulated error in the PID controller.
  * @prev_err:	error in the previous iteration of the PID controller.
  *		Used to calculate the derivative term.
@@ -70,6 +72,7 @@ static inline s64 div_frac(s64 x, s64 y)
  *					controlling for.
  */
 struct power_allocator_params {
+	bool allocated_tzp;
 	s64 err_integral;
 	s32 prev_err;
 	int trip_switch_on;
@@ -527,8 +530,7 @@ static void allow_maximum_power(struct thermal_zone_device *tz)
  * Initialize the PID controller parameters and bind it to the thermal
  * zone.
  *
- * Return: 0 on success, -EINVAL if the thermal zone doesn't have tzp or -ENOMEM
- * if we ran out of memory.
+ * Return: 0 on success, or -ENOMEM if we ran out of memory.
  */
 static int power_allocator_bind(struct thermal_zone_device *tz)
 {
@@ -536,13 +538,20 @@ static int power_allocator_bind(struct thermal_zone_device *tz)
 	struct power_allocator_params *params;
 	unsigned long control_temp;
 
-	if (!tz->tzp)
-		return -EINVAL;
-
 	params = kzalloc(sizeof(*params), GFP_KERNEL);
 	if (!params)
 		return -ENOMEM;
 
+	if (!tz->tzp) {
+		tz->tzp = kzalloc(sizeof(*tz->tzp), GFP_KERNEL);
+		if (!tz->tzp) {
+			ret = -ENOMEM;
+			goto free_params;
+		}
+
+		params->allocated_tzp = true;
+	}
+
 	if (!tz->tzp->sustainable_power)
 		dev_warn(&tz->device, "power_allocator: sustainable_power will be estimated\n");
 
@@ -563,11 +572,24 @@ static int power_allocator_bind(struct thermal_zone_device *tz)
 	tz->governor_data = params;
 
 	return 0;
+
+free_params:
+	kfree(params);
+
+	return ret;
 }
 
 static void power_allocator_unbind(struct thermal_zone_device *tz)
 {
+	struct power_allocator_params *params = tz->governor_data;
+
 	dev_dbg(&tz->device, "Unbinding from thermal zone %d\n", tz->id);
+
+	if (params->allocated_tzp) {
+		kfree(tz->tzp);
+		tz->tzp = NULL;
+	}
+
 	kfree(tz->governor_data);
 	tz->governor_data = NULL;
 }
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/