[PATCH 06/11] regulators: qcom-smd: Add PM8916 support
From: Andy Gross
Date: Tue Sep 08 2015 - 17:37:46 EST
This patch adds support and documentation for the PM8916 regulators
found on MSM8916 platforms.
Signed-off-by: Andy Gross <agross@xxxxxxxxxxxxxx>
---
.../bindings/soc/qcom/qcom,smd-rpm-regulator.txt | 18 ++++++
drivers/regulator/qcom_smd-regulator.c | 64 ++++++++++++++++++++
2 files changed, 82 insertions(+)
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt
index 7084474..5c867e9 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt
@@ -18,6 +18,7 @@ Regulator nodes are identified by their compatible:
Definition: must be one of:
"qcom,rpm-pm8841-regulators"
"qcom,rpm-pm8941-regulators"
+ "qcom,rpm-pm8916-regulators"
- vdd_s1-supply:
- vdd_s2-supply:
@@ -50,6 +51,19 @@ Regulator nodes are identified by their compatible:
Definition: reference to regulator supplying the input pin, as
described in the data sheet
+- vdd_s1:
+- vdd_s2:
+- vdd_s3:
+- vdd_s4:
+- vdd_l1_l2_l3-supply
+- vdd_l4_l5_l6-supply
+- vdd_l7-supply
+- vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18:
+ Usage: optional (pm8916 only)
+ Value type: <phandle>
+ Definition: reference to regulator supplying the input pin, as
+ described in the data sheet
+
The regulator node houses sub-nodes for each regulator within the device. Each
sub-node is identified using the node's name, with valid values listed for each
of the pmics below.
@@ -62,6 +76,10 @@ pm8941:
l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2,
lvs3, 5vs1, 5vs2
+pm8916:
+ s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
+ l14, l15, l16, l17, l18
+
The content of each sub-node is defined by the standard binding for regulators -
see regulator.txt.
diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
index 9c6167d..e92735f 100644
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -211,6 +211,43 @@ static const struct regulator_desc pm8941_switch = {
.ops = &rpm_switch_ops,
};
+static const struct regulator_desc pm8916_pldo = {
+ .linear_ranges = (struct regulator_linear_range[]) {
+ REGULATOR_LINEAR_RANGE(750000, 0, 208, 12500),
+ },
+ .n_linear_ranges = 1,
+ .n_voltages = 209,
+ .ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pm8916_nldo = {
+ .linear_ranges = (struct regulator_linear_range[]) {
+ REGULATOR_LINEAR_RANGE(375000, 0, 93, 12500),
+ },
+ .n_linear_ranges = 1,
+ .n_voltages = 94,
+ .ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pm8916_buck_lvo_smps = {
+ .linear_ranges = (struct regulator_linear_range[]) {
+ REGULATOR_LINEAR_RANGE(375000, 0, 95, 12500),
+ REGULATOR_LINEAR_RANGE(750000, 96, 127, 25000),
+ },
+ .n_linear_ranges = 2,
+ .n_voltages = 128,
+ .ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pm8916_buck_hvo_smps = {
+ .linear_ranges = (struct regulator_linear_range[]) {
+ REGULATOR_LINEAR_RANGE(1550000, 0, 31, 25000),
+ },
+ .n_linear_ranges = 1,
+ .n_voltages = 32,
+ .ops = &rpm_smps_ldo_ops,
+};
+
struct rpm_regulator_data {
const char *name;
u32 type;
@@ -272,9 +309,36 @@ static const struct rpm_regulator_data rpm_pm8941_regulators[] = {
{}
};
+static const struct rpm_regulator_data rpm_pm8916_regulators[] = {
+ { "s1", QCOM_SMD_RPM_SMPA, 1, &pm8916_buck_lvo_smps, "vdd_s1" },
+ { "s2", QCOM_SMD_RPM_SMPA, 2, &pm8916_buck_lvo_smps, "vdd_s2" },
+ { "s3", QCOM_SMD_RPM_SMPA, 3, &pm8916_buck_lvo_smps, "vdd_s3" },
+ { "s4", QCOM_SMD_RPM_SMPA, 4, &pm8916_buck_hvo_smps, "vdd_s4" },
+ { "l1", QCOM_SMD_RPM_LDOA, 1, &pm8916_nldo, "vdd_l1_l2_l3" },
+ { "l2", QCOM_SMD_RPM_LDOA, 2, &pm8916_nldo, "vdd_l1_l2_l3" },
+ { "l3", QCOM_SMD_RPM_LDOA, 3, &pm8916_nldo, "vdd_l1_l2_l3" },
+ { "l4", QCOM_SMD_RPM_LDOA, 4, &pm8916_pldo, "vdd_l4_l5_l6" },
+ { "l5", QCOM_SMD_RPM_LDOA, 5, &pm8916_pldo, "vdd_l4_l5_l6" },
+ { "l6", QCOM_SMD_RPM_LDOA, 6, &pm8916_pldo, "vdd_l4_l5_l6" },
+ { "l7", QCOM_SMD_RPM_LDOA, 7, &pm8916_pldo, "vdd_l7" },
+ { "l8", QCOM_SMD_RPM_LDOA, 8, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18" },
+ { "l9", QCOM_SMD_RPM_LDOA, 9, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18" },
+ { "l10", QCOM_SMD_RPM_LDOA, 10, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
+ { "l11", QCOM_SMD_RPM_LDOA, 11, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
+ { "l12", QCOM_SMD_RPM_LDOA, 12, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
+ { "l13", QCOM_SMD_RPM_LDOA, 13, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
+ { "l14", QCOM_SMD_RPM_LDOA, 14, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
+ { "l15", QCOM_SMD_RPM_LDOA, 15, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
+ { "l16", QCOM_SMD_RPM_LDOA, 16, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
+ { "l17", QCOM_SMD_RPM_LDOA, 17, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
+ { "l18", QCOM_SMD_RPM_LDOA, 18, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
+ {}
+};
+
static const struct of_device_id rpm_of_match[] = {
{ .compatible = "qcom,rpm-pm8841-regulators", .data = &rpm_pm8841_regulators },
{ .compatible = "qcom,rpm-pm8941-regulators", .data = &rpm_pm8941_regulators },
+ { .compatible = "qcom,rpm-pm8916-regulators", .data = &rpm_pm8916_regulators },
{}
};
MODULE_DEVICE_TABLE(of, rpm_of_match);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/