[PATCH 08/21] ARM/dmaengine: edma: Remove limitation on the number of eDMA controllers
From: Peter Ujfalusi
Date: Thu Sep 10 2015 - 04:45:22 EST
bla-bla and bla
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
---
arch/arm/common/edma.c | 22 +++++-----------------
drivers/dma/edma.c | 17 ++++++++---------
2 files changed, 13 insertions(+), 26 deletions(-)
diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
index 15b68ce98ec7..0f29997c62df 100644
--- a/arch/arm/common/edma.c
+++ b/arch/arm/common/edma.c
@@ -1227,24 +1227,7 @@ static int edma_probe(struct platform_device *pdev)
.parent = &pdev->dev,
};
- /* When booting with DT the pdev->id is -1 */
- if (dev_id < 0)
- dev_id = arch_num_cc;
-
- if (dev_id >= EDMA_MAX_CC) {
- dev_err(dev,
- "eDMA3 with device id 0 and 1 is supported (id: %d)\n",
- dev_id);
- return -EINVAL;
- }
-
if (node) {
- /* Check if this is a second instance registered */
- if (arch_num_cc) {
- dev_err(dev, "only one EDMA instance is supported via DT\n");
- return -ENODEV;
- }
-
info = edma_setup_info_from_dt(dev, node);
if (IS_ERR(info)) {
dev_err(dev, "failed to get DT data\n");
@@ -1278,6 +1261,11 @@ static int edma_probe(struct platform_device *pdev)
cc->dev = dev;
cc->id = dev_id;
+ /* When booting with DT the pdev->id is -1 */
+ if (dev_id < 0) {
+ cc->id = 0;
+ dev_id = arch_num_cc;
+ }
dev_set_drvdata(dev, cc);
cc->base = devm_ioremap_resource(dev, mem);
diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
index 53d48b2a700d..fc91ab9dd1bb 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@@ -991,14 +991,12 @@ static void edma_dma_init(struct edma_cc *ecc, struct dma_device *dma,
INIT_LIST_HEAD(&dma->channels);
}
-static struct of_dma_filter_info edma_filter_info = {
- .filter_fn = edma_filter_fn,
-};
-
static int edma_probe(struct platform_device *pdev)
{
struct edma_cc *ecc;
struct device_node *parent_node = pdev->dev.parent->of_node;
+ struct platform_device *parent_pdev =
+ to_platform_device(pdev->dev.parent);
int ret;
ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
@@ -1015,7 +1013,10 @@ static int edma_probe(struct platform_device *pdev)
if (!ecc->cc)
return -ENODEV;
- ecc->ctlr = pdev->id;
+ ecc->ctlr = parent_pdev->id;
+ if (ecc->ctlr < 0)
+ ecc->ctlr = 0;
+
ecc->dummy_slot = edma_alloc_slot(ecc->cc, EDMA_SLOT_ANY);
if (ecc->dummy_slot < 0) {
dev_err(&pdev->dev, "Can't allocate PaRAM dummy slot\n");
@@ -1038,10 +1039,8 @@ static int edma_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, ecc);
if (parent_node) {
- dma_cap_set(DMA_SLAVE, edma_filter_info.dma_cap);
- dma_cap_set(DMA_CYCLIC, edma_filter_info.dma_cap);
- of_dma_controller_register(parent_node, of_dma_simple_xlate,
- &edma_filter_info);
+ of_dma_controller_register(parent_node, of_dma_xlate_by_chan_id,
+ &ecc->dma_slave);
}
dev_info(&pdev->dev, "TI EDMA DMA engine driver\n");
--
2.5.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/