[PATCH v2 3/5] stmmac: remove some __func__ printing
From: LABBE Corentin
Date: Thu Sep 10 2015 - 08:38:34 EST
Now that stmmac use netdev_xxx, some __func__ are not necessary since their
use was to clearly identify which driver was logging.
This patch remove __func__ where such printing is useless.
Signed-off-by: LABBE Corentin <clabbe.montjoie@xxxxxxxxx>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 52 +++++++++--------------
1 file changed, 21 insertions(+), 31 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index b016f04..c3ec169 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -987,8 +987,7 @@ static int stmmac_init_rx_buffers(struct stmmac_priv *priv, struct dma_desc *p,
skb = __netdev_alloc_skb_ip_align(priv->dev, priv->dma_buf_sz, flags);
if (!skb) {
- netdev_err(priv->dev,
- "%s: Rx init fails; skb is NULL\n", __func__);
+ netdev_err(priv->dev, "Rx init fails; skb is NULL\n");
return -ENOMEM;
}
priv->rx_skbuff[i] = skb;
@@ -996,7 +995,7 @@ static int stmmac_init_rx_buffers(struct stmmac_priv *priv, struct dma_desc *p,
priv->dma_buf_sz,
DMA_FROM_DEVICE);
if (dma_mapping_error(priv->device, priv->rx_skbuff_dma[i])) {
- netdev_err(priv->dev, "%s: DMA mapping error\n", __func__);
+ netdev_err(priv->dev, "DMA mapping error\n");
dev_kfree_skb_any(skb);
return -EINVAL;
}
@@ -1710,8 +1709,7 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
/* DMA initialization and SW reset */
ret = stmmac_init_dma_engine(priv);
if (ret < 0) {
- netdev_err(priv->dev, "%s: DMA engine initialization failed\n",
- __func__);
+ netdev_err(priv->dev, "DMA engine initialization failed\n");
return ret;
}
@@ -1743,15 +1741,13 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
if (init_ptp) {
ret = stmmac_init_ptp(priv);
if (ret && ret != -EOPNOTSUPP)
- netdev_warn(priv->dev, "%s: failed PTP initialisation\n",
- __func__);
+ netdev_warn(priv->dev, "failed PTP initialisation\n");
}
#ifdef CONFIG_DEBUG_FS
ret = stmmac_init_fs(dev);
if (ret < 0)
- netdev_warn(priv->dev, "%s: failed debugFS registration\n",
- __func__);
+ netdev_warn(priv->dev, "failed debugFS registration\n");
#endif
/* Start the ball rolling... */
netdev_dbg(priv->dev, "%s: DMA RX/TX processes started...\n",
@@ -1798,8 +1794,7 @@ static int stmmac_open(struct net_device *dev)
ret = stmmac_init_phy(dev);
if (ret) {
netdev_err(priv->dev,
- "%s: Cannot attach to PHY (error: %d)\n",
- __func__, ret);
+ "Cannot attach to PHY (error: %d)\n", ret);
return ret;
}
}
@@ -1815,21 +1810,19 @@ static int stmmac_open(struct net_device *dev)
ret = alloc_dma_desc_resources(priv);
if (ret < 0) {
- netdev_err(priv->dev, "%s: DMA descriptors allocation failed\n"
- __func__);
+ netdev_err(priv->dev, "DMA descriptors allocation failed\n");
goto dma_desc_error;
}
ret = init_dma_desc_rings(dev, GFP_KERNEL);
if (ret < 0) {
- netdev_err(priv->dev, "%s: DMA descriptors initialization failed\n",
- __func__);
+ netdev_err(priv->dev, "DMA descriptors initialization failed\n");
goto init_error;
}
ret = stmmac_hw_setup(dev, true);
if (ret < 0) {
- netdev_err(priv->dev, "%s: Hw setup failed\n", __func__);
+ netdev_err(priv->dev, "Hw setup failed\n");
goto init_error;
}
@@ -1843,8 +1836,8 @@ static int stmmac_open(struct net_device *dev)
IRQF_SHARED, dev->name, dev);
if (unlikely(ret < 0)) {
netdev_err(priv->dev,
- "%s: ERROR: allocating the IRQ %d (error: %d)\n",
- __func__, dev->irq, ret);
+ "ERROR: allocating the IRQ %d (error: %d)\n",
+ dev->irq, ret);
goto init_error;
}
@@ -1854,8 +1847,8 @@ static int stmmac_open(struct net_device *dev)
IRQF_SHARED, dev->name, dev);
if (unlikely(ret < 0)) {
netdev_err(priv->dev,
- "%s: ERROR: allocating the WoL IRQ %d (%d)\n",
- __func__, priv->wol_irq, ret);
+ "ERROR: allocating the WoL IRQ %d (%d)\n",
+ priv->wol_irq, ret);
goto wolirq_error;
}
}
@@ -1866,8 +1859,8 @@ static int stmmac_open(struct net_device *dev)
dev->name, dev);
if (unlikely(ret < 0)) {
netdev_err(priv->dev,
- "%s: ERROR: allocating the LPI IRQ %d (%d)\n",
- __func__, priv->lpi_irq, ret);
+ "ERROR: allocating the LPI IRQ %d (%d)\n",
+ priv->lpi_irq, ret);
goto lpiirq_error;
}
}
@@ -1973,8 +1966,7 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
netif_stop_queue(dev);
/* This is a hard error, log it. */
netdev_err(priv->dev,
- "%s: Tx Ring full when queue awake\n",
- __func__);
+ "Tx Ring full when queue awake\n");
}
return NETDEV_TX_BUSY;
}
@@ -2882,8 +2874,7 @@ int stmmac_dvr_probe(struct device *device,
priv->stmmac_clk = devm_clk_get(priv->device, STMMAC_RESOURCE_NAME);
if (IS_ERR(priv->stmmac_clk)) {
- netdev_warn(priv->dev, "%s: warning: cannot get CSR clock\n",
- __func__);
+ netdev_warn(priv->dev, "warning: cannot get CSR clock\n");
/* If failed to obtain stmmac_clk and specific clk_csr value
* is NOT passed from the platform, probe fail.
*/
@@ -2956,8 +2947,7 @@ int stmmac_dvr_probe(struct device *device,
ret = register_netdev(ndev);
if (ret) {
- netdev_err(priv->dev, "%s: ERROR %i registering the device\n",
- __func__, ret);
+ netdev_err(priv->dev, "ERROR %i registering the device\n", ret);
goto error_netdev_register;
}
@@ -2980,8 +2970,8 @@ int stmmac_dvr_probe(struct device *device,
ret = stmmac_mdio_register(ndev);
if (ret < 0) {
netdev_err(priv->dev,
- "%s: MDIO bus (id: %d) registration failed",
- __func__, priv->plat->bus_id);
+ "MDIO bus (id: %d) registration failed",
+ priv->plat->bus_id);
goto error_mdio_register;
}
}
@@ -3013,7 +3003,7 @@ int stmmac_dvr_remove(struct net_device *ndev)
{
struct stmmac_priv *priv = netdev_priv(ndev);
- netdev_info(priv->dev, "%s: removing driver", __func__);
+ netdev_info(priv->dev, "removing driver");
priv->hw->dma->stop_rx(priv->ioaddr);
priv->hw->dma->stop_tx(priv->ioaddr);
--
2.4.6
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/