Re: [PATCH v4 3/4] irqchip: GIC: Convert to EOImode == 1

[Julien Grall]

On 10/09/15 10:54, Marc Zyngier wrote:
> Hi Julian,

Hi Marc,

> On 09/09/15 20:23, Julien Grall wrote:
>> Hi,
>>
>> I've been trying the latest linus/master (a794b4f), which include this
>> patch, as baremetal kernel on X-gene. This is failing on early boot
>> without much log.
>>
>> After bisecting the tree, I found the error coming from this patch.
>> While this patch is valid, it made me remembered that X-Gene (at least
>> the first version) as an odd GICv2.
>>
>> The GICC is divided in 2 area of 4K, each one aligned at a 64KB address.
>> This means that, the address of GICC_DIR won't be 0x1000 but 0x10000.
> 
> Not really. I already mentioned that one a while ago:
> 
> http://lists.infradead.org/pipermail/linux-arm-kernel/2015-March/332249.html

Sorry I haven't seen this thread on the ML.

> The first page of GIC is aliased over the first 64kB, and the second 
> page aliased over the second 64kB. So you get a consistent mapping if 
> you use (base + 0xF000) to address GICC. Also, the DT that's in 
> mainline is showing a 4kB CPU interface, which doesn't enable 
> EOImode==1.
> You must be using a firmware that's newer than mine, since 
> I'm perfectly able to boot my Mustang with these patches.

My U-boot firmware is:

U-Boot 2013.04-mustang_sw_1.15.12 (May 20 2015 - 10:03:33)

The interrupt controller node looks like:

interrupt-controller@78090000 {
                reg = <0x0 0x78090000 0x0 0x10000 0x0 0x780a0000 0x0
0x20000 0x0 0x780c0000 0x0 0x10000 0x0 0x780e0000 0x0 0x20000>;
                interrupts = <0x1 0x9 0xf04>;
                compatible = "arm,cortex-a15-gic";
                #interrupt-cells = <0x3>;
                phandle = <0x1>;
                interrupt-controller;
                linux,phandle = <0x1>;
        };

Note that we have a recent firmware which correct the GICD region to use
the non-secure one rather than the secure. See [1] for more details.

> 
>> We had the same issue on Xen when we did the first port of X-gene [1].
>> Although, we choose to add a quirk in Xen for this platform in order to
>> map contiguously in the virtual memory the 2 part of GICC.
>>
>> Note that, back then, Ian suggested to extend the bindings to support a
>> such platform [2]. AFAICT, there was no follow-up on it.
> 
> The main problem here is not to update the binding, but the fact that 
> you *cannot* update the DT on x-gene (the firmware will replace your 
> GIC node with what it thinks it is), and the APM guys can't be bothered 
> to fix their stuff.
> 
> In the meantime, can you give the following patch a shot? My Mustang is 
> wired to a 4kB CPU interface, so I'll need your help to test it.

I applied the two patches on top of linus/master and I'm able to boot
correctly on X-gene. Thank you!

Regards,

[1] http://lists.xen.org/archives/html/xen-devel/2015-04/msg02816.html

-- 
Julien Grall
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/