Re: [PATCH 2/2] ASoC: sunxi: add support for the on-chip codec on early Allwinner SoCs

From: Mark Brown
Date: Wed Sep 16 2015 - 15:16:30 EST


On Sat, Sep 12, 2015 at 03:26:24PM +0200, Maxime Ripard wrote:

This looks pretty good, there's a few minor things below but I'll apply
anyway - please send followup patches fixing these.

> + if (clk_set_rate(scodec->clk_module, clk_freq))
> + return -EINVAL;

Better to pass back the error code here rather than silently discard it
(it might have more information).

> +static struct snd_soc_dai_driver sun4i_codec_dai = {
> + .name = "Codec",
> + .ops = &sun4i_codec_dai_ops,
> + .playback = {
> + .stream_name = "Codec Playback",
> + .channels_min = 1,
> + .channels_max = 2,
> + .rate_min = 8000,
> + .rate_max = 192000,
> + .rates = SNDRV_PCM_RATE_8000_48000 |
> + SNDRV_PCM_RATE_96000 |
> + SNDRV_PCM_RATE_192000 |
> + SNDRV_PCM_RATE_KNOT,

No need to specify both explicit rates and _KNOT, _KNOT covers
everything.

> + .formats = SNDRV_PCM_FMTBIT_S16_LE |
> + SNDRV_PCM_FMTBIT_S32_LE,
> + .sig_bits = 24,

So presumably also S24_LE (ie, 24 bits packed into a 32 bit word)?

> + /* Enable the bus clock */
> + if (clk_prepare_enable(scodec->clk_apb)) {
> + dev_err(&pdev->dev, "Failed to enable the APB clock\n");
> + return -EINVAL;
> + }

Ideally we'd have runtime power management to disable the clocks when
idle.

Attachment: signature.asc
Description: Digital signature