[PATCH v5 29/53] PCI: Allow bridge optional only io port resource required size to be 0

[Yinghai Lu]

When there is no child device under the non hotplug bridge,
We can use 0 for required size, and do not use old size as required size.

That will save some io port range for other bridges, as BIOS could do
some partial assign, and we want to use those not used io port range.

When there is child device, size will not be 0.
when the bridge supports hotplug, min_size will not be 0.
So they will still honor the old size as required size.

Signed-off-by: Yinghai Lu <yinghai@xxxxxxxxxx>
---
 drivers/pci/setup-bus.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 9f35aec..7a6476f 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -1192,8 +1192,9 @@ static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size,
 
 	size = size_aligned_for_isa(size);
 	size += size1;
-	size0 = calculate_size(size, min_size,
-			resource_size(b_res), min_align);
+	if (size || min_size)
+		size0 = calculate_size(size, min_size,
+					resource_size(b_res), min_align);
 	sum_add_size = size_aligned_for_isa(sum_add_size);
 	sum_add_size += sum_add_size1;
 	if (sum_add_size < min_sum_size)
@@ -1209,7 +1210,7 @@ static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size,
 		return;
 	}
 
-	b_res->start = min_align;
+	b_res->start = size0 ? min_align : 0;
 	b_res->end = b_res->start + size0 - 1;
 	b_res->flags |= IORESOURCE_STARTALIGN;
 	if (size1 > size0 && realloc_head) {
-- 
1.8.4.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/