[PATCH v2 2/5] net: add Hisilicon Network Subsystem MDIO support
From: huangdaode
Date: Thu Sep 17 2015 - 02:46:59 EST
The MDIO support for Hisilicon Network Subsystem. It is used in Hislicon
hip04, hip05 and Hi1610 SoC to control the external PHY
Signed-off-by: huangdaode <huangdaode@xxxxxxxxxxxxx>
Signed-off-by: Yisen Zhuang <Yisen.Zhuang@xxxxxxxxxx>
Signed-off-by: Kenneth Lee <liguozhu@xxxxxxxxxx>
---
drivers/net/ethernet/hisilicon/Kconfig | 10 +-
drivers/net/ethernet/hisilicon/Makefile | 3 +-
drivers/net/ethernet/hisilicon/hip04_mdio.c | 185 ----------
drivers/net/ethernet/hisilicon/hns_mdio.c | 520 ++++++++++++++++++++++++++++
4 files changed, 531 insertions(+), 187 deletions(-)
delete mode 100644 drivers/net/ethernet/hisilicon/hip04_mdio.c
create mode 100644 drivers/net/ethernet/hisilicon/hns_mdio.c
diff --git a/drivers/net/ethernet/hisilicon/Kconfig b/drivers/net/ethernet/hisilicon/Kconfig
index dead17b..9184f1d 100644
--- a/drivers/net/ethernet/hisilicon/Kconfig
+++ b/drivers/net/ethernet/hisilicon/Kconfig
@@ -5,7 +5,7 @@
config NET_VENDOR_HISILICON
bool "Hisilicon devices"
default y
- depends on ARM
+ depends on ARM || ARM64
---help---
If you have a network (Ethernet) card belonging to this class, say Y.
@@ -27,8 +27,16 @@ config HIP04_ETH
select PHYLIB
select MARVELL_PHY
select MFD_SYSCON
+ select HNS_MDIO
---help---
If you wish to compile a kernel for a hardware with hisilicon p04 SoC and
want to use the internal ethernet then you should answer Y to this.
+config HNS_MDIO
+ tristate "Hisilicon HNS MDIO device Support"
+ select MDIO
+ ---help---
+ This selects the HNS MDIO support. It is needed by HNS_DSAF to access
+ the PHY
+
endif # NET_VENDOR_HISILICON
diff --git a/drivers/net/ethernet/hisilicon/Makefile b/drivers/net/ethernet/hisilicon/Makefile
index 6c14540..04b4b21 100644
--- a/drivers/net/ethernet/hisilicon/Makefile
+++ b/drivers/net/ethernet/hisilicon/Makefile
@@ -3,4 +3,5 @@
#
obj-$(CONFIG_HIX5HD2_GMAC) += hix5hd2_gmac.o
-obj-$(CONFIG_HIP04_ETH) += hip04_mdio.o hip04_eth.o
+obj-$(CONFIG_HIP04_ETH) += hip04_eth.o
+obj-$(CONFIG_HNS_MDIO) += hns_mdio.o
diff --git a/drivers/net/ethernet/hisilicon/hip04_mdio.c b/drivers/net/ethernet/hisilicon/hip04_mdio.c
deleted file mode 100644
index fca0a5b..0000000
--- a/drivers/net/ethernet/hisilicon/hip04_mdio.c
+++ /dev/null
@@ -1,185 +0,0 @@
-/* Copyright (c) 2014 Linaro Ltd.
- * Copyright (c) 2014 Hisilicon Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/of_mdio.h>
-#include <linux/delay.h>
-
-#define MDIO_CMD_REG 0x0
-#define MDIO_ADDR_REG 0x4
-#define MDIO_WDATA_REG 0x8
-#define MDIO_RDATA_REG 0xc
-#define MDIO_STA_REG 0x10
-
-#define MDIO_START BIT(14)
-#define MDIO_R_VALID BIT(1)
-#define MDIO_READ (BIT(12) | BIT(11) | MDIO_START)
-#define MDIO_WRITE (BIT(12) | BIT(10) | MDIO_START)
-
-struct hip04_mdio_priv {
- void __iomem *base;
-};
-
-#define WAIT_TIMEOUT 10
-static int hip04_mdio_wait_ready(struct mii_bus *bus)
-{
- struct hip04_mdio_priv *priv = bus->priv;
- int i;
-
- for (i = 0; readl_relaxed(priv->base + MDIO_CMD_REG) & MDIO_START; i++) {
- if (i == WAIT_TIMEOUT)
- return -ETIMEDOUT;
- msleep(20);
- }
-
- return 0;
-}
-
-static int hip04_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
-{
- struct hip04_mdio_priv *priv = bus->priv;
- u32 val;
- int ret;
-
- ret = hip04_mdio_wait_ready(bus);
- if (ret < 0)
- goto out;
-
- val = regnum | (mii_id << 5) | MDIO_READ;
- writel_relaxed(val, priv->base + MDIO_CMD_REG);
-
- ret = hip04_mdio_wait_ready(bus);
- if (ret < 0)
- goto out;
-
- val = readl_relaxed(priv->base + MDIO_STA_REG);
- if (val & MDIO_R_VALID) {
- dev_err(bus->parent, "SMI bus read not valid\n");
- ret = -ENODEV;
- goto out;
- }
-
- val = readl_relaxed(priv->base + MDIO_RDATA_REG);
- ret = val & 0xFFFF;
-out:
- return ret;
-}
-
-static int hip04_mdio_write(struct mii_bus *bus, int mii_id,
- int regnum, u16 value)
-{
- struct hip04_mdio_priv *priv = bus->priv;
- u32 val;
- int ret;
-
- ret = hip04_mdio_wait_ready(bus);
- if (ret < 0)
- goto out;
-
- writel_relaxed(value, priv->base + MDIO_WDATA_REG);
- val = regnum | (mii_id << 5) | MDIO_WRITE;
- writel_relaxed(val, priv->base + MDIO_CMD_REG);
-out:
- return ret;
-}
-
-static int hip04_mdio_reset(struct mii_bus *bus)
-{
- int temp, i;
-
- for (i = 0; i < PHY_MAX_ADDR; i++) {
- hip04_mdio_write(bus, i, 22, 0);
- temp = hip04_mdio_read(bus, i, MII_BMCR);
- if (temp < 0)
- continue;
-
- temp |= BMCR_RESET;
- if (hip04_mdio_write(bus, i, MII_BMCR, temp) < 0)
- continue;
- }
-
- mdelay(500);
- return 0;
-}
-
-static int hip04_mdio_probe(struct platform_device *pdev)
-{
- struct resource *r;
- struct mii_bus *bus;
- struct hip04_mdio_priv *priv;
- int ret;
-
- bus = mdiobus_alloc_size(sizeof(struct hip04_mdio_priv));
- if (!bus) {
- dev_err(&pdev->dev, "Cannot allocate MDIO bus\n");
- return -ENOMEM;
- }
-
- bus->name = "hip04_mdio_bus";
- bus->read = hip04_mdio_read;
- bus->write = hip04_mdio_write;
- bus->reset = hip04_mdio_reset;
- snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(&pdev->dev));
- bus->parent = &pdev->dev;
- priv = bus->priv;
-
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- priv->base = devm_ioremap_resource(&pdev->dev, r);
- if (IS_ERR(priv->base)) {
- ret = PTR_ERR(priv->base);
- goto out_mdio;
- }
-
- ret = of_mdiobus_register(bus, pdev->dev.of_node);
- if (ret < 0) {
- dev_err(&pdev->dev, "Cannot register MDIO bus (%d)\n", ret);
- goto out_mdio;
- }
-
- platform_set_drvdata(pdev, bus);
-
- return 0;
-
-out_mdio:
- mdiobus_free(bus);
- return ret;
-}
-
-static int hip04_mdio_remove(struct platform_device *pdev)
-{
- struct mii_bus *bus = platform_get_drvdata(pdev);
-
- mdiobus_unregister(bus);
- mdiobus_free(bus);
-
- return 0;
-}
-
-static const struct of_device_id hip04_mdio_match[] = {
- { .compatible = "hisilicon,hip04-mdio" },
- { }
-};
-MODULE_DEVICE_TABLE(of, hip04_mdio_match);
-
-static struct platform_driver hip04_mdio_driver = {
- .probe = hip04_mdio_probe,
- .remove = hip04_mdio_remove,
- .driver = {
- .name = "hip04-mdio",
- .of_match_table = hip04_mdio_match,
- },
-};
-
-module_platform_driver(hip04_mdio_driver);
-
-MODULE_DESCRIPTION("HISILICON P04 MDIO interface driver");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:hip04-mdio");
diff --git a/drivers/net/ethernet/hisilicon/hns_mdio.c b/drivers/net/ethernet/hisilicon/hns_mdio.c
new file mode 100644
index 0000000..e4ec52a
--- /dev/null
+++ b/drivers/net/ethernet/hisilicon/hns_mdio.c
@@ -0,0 +1,520 @@
+/*
+ * Copyright (c) 2014-2015 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/errno.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/netdevice.h>
+#include <linux/of_address.h>
+#include <linux/of.h>
+#include <linux/of_mdio.h>
+#include <linux/of_platform.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock_types.h>
+
+#define MDIO_DRV_NAME "Hi-HNS_MDIO"
+#define MDIO_BUS_NAME "Hisilicon MII Bus"
+#define MDIO_DRV_VERSION "1.3.0"
+#define MDIO_COPYRIGHT "Copyright(c) 2015 Huawei Corporation."
+#define MDIO_DRV_STRING MDIO_BUS_NAME
+#define MDIO_DEFAULT_DEVICE_DESCR MDIO_BUS_NAME
+
+#define MDIO_CTL_DEV_ADDR(x) (x & 0x1f)
+#define MDIO_CTL_PORT_ADDR(x) ((x & 0x1f) << 5)
+
+#define MDIO_TIMEOUT 1000000
+
+struct hns_mdio_device {
+ void *vbase; /* mdio reg base address */
+ void *sys_vbase;
+};
+
+/* mdio reg */
+#define MDIO_COMMAND_REG 0x0
+#define MDIO_ADDR_REG 0x4
+#define MDIO_WDATA_REG 0x8
+#define MDIO_RDATA_REG 0xc
+#define MDIO_STA_REG 0x10
+
+/* cfg phy bit map */
+#define MDIO_CMD_DEVAD_M 0x1f
+#define MDIO_CMD_DEVAD_S 0
+#define MDIO_CMD_PRTAD_M 0x1f
+#define MDIO_CMD_PRTAD_S 5
+#define MDIO_CMD_OP_M 0x3
+#define MDIO_CMD_OP_S 10
+#define MDIO_CMD_ST_M 0x3
+#define MDIO_CMD_ST_S 12
+#define MDIO_CMD_START_B 14
+
+#define MDIO_ADDR_DATA_M 0xffff
+#define MDIO_ADDR_DATA_S 0
+
+#define MDIO_WDATA_DATA_M 0xffff
+#define MDIO_WDATA_DATA_S 0
+
+#define MDIO_RDATA_DATA_M 0xffff
+#define MDIO_RDATA_DATA_S 0
+
+#define MDIO_STATE_STA_B 0
+
+enum mdio_st_clause {
+ MDIO_ST_CLAUSE_45 = 0,
+ MDIO_ST_CLAUSE_22
+};
+
+enum mdio_c22_op_seq {
+ MDIO_C22_WRITE = 1,
+ MDIO_C22_READ = 2
+};
+
+enum mdio_c45_op_seq {
+ MDIO_C45_WRITE_ADDR = 0,
+ MDIO_C45_WRITE_DATA,
+ MDIO_C45_READ_INCREMENT,
+ MDIO_C45_READ
+};
+
+/* peri subctrl reg */
+#define MDIO_SC_CLK_EN 0x338
+#define MDIO_SC_CLK_DIS 0x33C
+#define MDIO_SC_RESET_REQ 0xA38
+#define MDIO_SC_RESET_DREQ 0xA3C
+#define MDIO_SC_CTRL 0x2010
+#define MDIO_SC_CLK_ST 0x531C
+#define MDIO_SC_RESET_ST 0x5A1C
+
+static void mdio_write_reg(void *base, u32 reg, u32 value)
+{
+ u8 __iomem *reg_addr = (u8 __iomem *)base;
+
+ writel_relaxed(value, reg_addr + reg);
+}
+
+#define MDIO_WRITE_REG(a, reg, value) \
+ mdio_write_reg((a)->vbase, (reg), (value))
+
+static u32 mdio_read_reg(void *base, u32 reg)
+{
+ u8 __iomem *reg_addr = (u8 __iomem *)base;
+
+ return readl_relaxed(reg_addr + reg);
+}
+
+#define mdio_set_field(origin, mask, shift, val) \
+ do { \
+ (origin) &= (~((mask) << (shift))); \
+ (origin) |= (((val) & (mask)) << (shift)); \
+ } while (0)
+
+#define mdio_get_field(origin, mask, shift) (((origin) >> (shift)) & (mask))
+
+static void mdio_set_reg_field(void *base, u32 reg, u32 mask, u32 shift,
+ u32 val)
+{
+ u32 origin = mdio_read_reg(base, reg);
+
+ mdio_set_field(origin, mask, shift, val);
+ mdio_write_reg(base, reg, origin);
+}
+
+#define MDIO_SET_REG_FIELD(dev, reg, mask, shift, val) \
+ mdio_set_reg_field((dev)->vbase, (reg), (mask), (shift), (val))
+
+static u32 mdio_get_reg_field(void *base, u32 reg, u32 mask, u32 shift)
+{
+ u32 origin;
+
+ origin = mdio_read_reg(base, reg);
+ return mdio_get_field(origin, mask, shift);
+}
+
+#define MDIO_GET_REG_FIELD(dev, reg, mask, shift) \
+ mdio_get_reg_field((dev)->vbase, (reg), (mask), (shift))
+
+#define MDIO_GET_REG_BIT(dev, reg, bit) \
+ mdio_get_reg_field((dev)->vbase, (reg), 0x1ull, (bit))
+
+#define MDIO_CHECK_SET_ST 1
+#define MDIO_CHECK_CLR_ST 0
+
+static int mdio_sc_cfg_reg_write(struct hns_mdio_device *mdio_dev,
+ u32 cfg_reg, u32 set_val,
+ u32 st_reg, u32 st_msk, u8 check_st)
+{
+ u32 time_cnt;
+ u32 reg_value;
+
+ mdio_write_reg((void *)mdio_dev->sys_vbase, cfg_reg, set_val);
+
+ for (time_cnt = MDIO_TIMEOUT; time_cnt; time_cnt--) {
+ reg_value = mdio_read_reg((void *)mdio_dev->sys_vbase, st_reg);
+ reg_value &= st_msk;
+ if ((!!check_st) == (!!reg_value))
+ break;
+ }
+
+ if ((!!check_st) != (!!reg_value))
+ return -EBUSY;
+
+ return 0;
+}
+
+static int hns_mdio_wait_ready(struct mii_bus *bus)
+{
+ struct hns_mdio_device *mdio_dev = bus->priv;
+ int i;
+ u32 cmd_reg_value = 1;
+
+ /* waitting for MDIO_COMMAND_REG 's mdio_start==0 */
+ /* after that can do read or write*/
+ for (i = 0; cmd_reg_value; i++) {
+ cmd_reg_value = MDIO_GET_REG_BIT(mdio_dev,
+ MDIO_COMMAND_REG,
+ MDIO_CMD_START_B);
+ if (i == MDIO_TIMEOUT)
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static void hns_mdio_cmd_write(struct hns_mdio_device *mdio_dev,
+ u8 is_c45, u8 op, u8 phy_id, u16 cmd)
+{
+ u32 cmd_reg_value;
+ u8 st = is_c45 ? MDIO_ST_CLAUSE_45 : MDIO_ST_CLAUSE_22;
+
+ cmd_reg_value = st << MDIO_CMD_ST_S;
+ cmd_reg_value |= op << MDIO_CMD_OP_S;
+ cmd_reg_value |=
+ (phy_id & MDIO_CMD_PRTAD_M) << MDIO_CMD_PRTAD_S;
+ cmd_reg_value |= (cmd & MDIO_CMD_DEVAD_M) << MDIO_CMD_DEVAD_S;
+ cmd_reg_value |= 1 << MDIO_CMD_START_B;
+
+ MDIO_WRITE_REG(mdio_dev, MDIO_COMMAND_REG, cmd_reg_value);
+}
+
+/**
+ * hns_mdio_write - access phy register
+ * @bus: mdio bus
+ * @phy_id: phy id
+ * @regnum: register num
+ * @value: register value
+ *
+ * Return 0 on success, negative on failure
+ */
+static int hns_mdio_write(struct mii_bus *bus,
+ int phy_id, int regnum, u16 data)
+{
+ int ret;
+ struct hns_mdio_device *mdio_dev = (struct hns_mdio_device *)bus->priv;
+ u8 devad = ((regnum >> 16) & 0x1f);
+ u8 is_c45 = !!(regnum & MII_ADDR_C45);
+ u16 reg = (u16)(regnum & 0xffff);
+ u8 op;
+ u16 cmd_reg_cfg;
+
+ dev_dbg(&bus->dev, "mdio write %s,base is %p\n",
+ bus->id, mdio_dev->vbase);
+ dev_dbg(&bus->dev, "phy id=%d, is_c45=%d, devad=%d, reg=%#x, write data=%d\n",
+ phy_id, is_c45, devad, reg, data);
+
+ /* wait for ready */
+ ret = hns_mdio_wait_ready(bus);
+ if (ret) {
+ dev_err(&bus->dev, "MDIO bus is busy\n");
+ return ret;
+ }
+
+ if (!is_c45) {
+ cmd_reg_cfg = reg;
+ op = MDIO_C22_WRITE;
+ } else {
+ /* config the cmd-reg to write addr*/
+ MDIO_SET_REG_FIELD(mdio_dev, MDIO_ADDR_REG, MDIO_ADDR_DATA_M,
+ MDIO_ADDR_DATA_S, reg);
+
+ hns_mdio_cmd_write(mdio_dev, is_c45,
+ MDIO_C45_WRITE_ADDR, phy_id, devad);
+
+ /* check for read or write opt is finished */
+ ret = hns_mdio_wait_ready(bus);
+ if (ret) {
+ dev_err(&bus->dev, "MDIO bus is busy\n");
+ return ret;
+ }
+
+ /* config the data needed writing */
+ cmd_reg_cfg = devad;
+ op = MDIO_C45_WRITE_ADDR;
+ }
+
+ MDIO_SET_REG_FIELD(mdio_dev, MDIO_WDATA_REG, MDIO_WDATA_DATA_M,
+ MDIO_WDATA_DATA_S, data);
+
+ hns_mdio_cmd_write(mdio_dev, is_c45, op, phy_id, cmd_reg_cfg);
+
+ return 0;
+}
+
+/**
+ * hns_mdio_read - access phy register
+ * @bus: mdio bus
+ * @phy_id: phy id
+ * @regnum: register num
+ * @value: register value
+ *
+ * Return phy register value
+ */
+static int hns_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
+{
+ int ret;
+ u16 reg_val = 0;
+ u8 devad = ((regnum >> 16) & 0x1f);
+ u8 is_c45 = !!(regnum & MII_ADDR_C45);
+ u16 reg = (u16)(regnum & 0xffff);
+ struct hns_mdio_device *mdio_dev = (struct hns_mdio_device *)bus->priv;
+
+ dev_dbg(&bus->dev, "mdio read %s,base is %p\n",
+ bus->id, mdio_dev->vbase);
+ dev_dbg(&bus->dev, "phy id=%d, is_c45=%d, devad=%d, reg=%#x!\n",
+ phy_id, is_c45, devad, reg);
+
+ /* Step 1: wait for ready */
+ ret = hns_mdio_wait_ready(bus);
+ if (ret) {
+ dev_err(&bus->dev, "MDIO bus is busy\n");
+ return ret;
+ }
+
+ if (!is_c45) {
+ hns_mdio_cmd_write(mdio_dev, is_c45,
+ MDIO_C22_READ, phy_id, reg);
+ } else {
+ MDIO_SET_REG_FIELD(mdio_dev, MDIO_ADDR_REG, MDIO_ADDR_DATA_M,
+ MDIO_ADDR_DATA_S, reg);
+
+ /* Step 2; config the cmd-reg to write addr*/
+ hns_mdio_cmd_write(mdio_dev, is_c45,
+ MDIO_C45_WRITE_ADDR, phy_id, devad);
+
+ /* Step 3: check for read or write opt is finished */
+ ret = hns_mdio_wait_ready(bus);
+ if (ret) {
+ dev_err(&bus->dev, "MDIO bus is busy\n");
+ return ret;
+ }
+
+ hns_mdio_cmd_write(mdio_dev, is_c45,
+ MDIO_C45_WRITE_ADDR, phy_id, devad);
+ }
+
+ /* Step 5: waitting for MDIO_COMMAND_REG 's mdio_start==0,*/
+ /* check for read or write opt is finished */
+ ret = hns_mdio_wait_ready(bus);
+ if (ret) {
+ dev_err(&bus->dev, "MDIO bus is busy\n");
+ return ret;
+ }
+
+ reg_val = MDIO_GET_REG_BIT(mdio_dev, MDIO_STA_REG, MDIO_STATE_STA_B);
+ if (reg_val) {
+ dev_err(&bus->dev, " ERROR! MDIO Read failed!\n");
+ return -EBUSY;
+ }
+
+ /* Step 6; get out data*/
+ reg_val = (u16)MDIO_GET_REG_FIELD(mdio_dev, MDIO_RDATA_REG,
+ MDIO_RDATA_DATA_M, MDIO_RDATA_DATA_S);
+
+ return reg_val;
+}
+
+/**
+ * hns_mdio_reset - reset mdio bus
+ * @bus: mdio bus
+ *
+ * Return 0 on success, negative on failure
+ */
+static int hns_mdio_reset(struct mii_bus *bus)
+{
+ struct hns_mdio_device *mdio_dev = (struct hns_mdio_device *)bus->priv;
+ int ret;
+
+ if (!mdio_dev->sys_vbase) {
+ dev_err(&bus->dev, "mdio sys ctl reg has not maped\n");
+ return -ENODEV;
+ }
+
+ /*1. reset req, and read reset st check*/
+ ret = mdio_sc_cfg_reg_write(mdio_dev, MDIO_SC_RESET_REQ, 0x1,
+ MDIO_SC_RESET_ST, 0x1,
+ MDIO_CHECK_SET_ST);
+ if (ret) {
+ dev_err(&bus->dev, "MDIO reset fail\n");
+ return ret;
+ }
+
+ /*2. dis clk, and read clk st check*/
+ ret = mdio_sc_cfg_reg_write(mdio_dev, MDIO_SC_CLK_DIS,
+ 0x1, MDIO_SC_CLK_ST, 0x1,
+ MDIO_CHECK_CLR_ST);
+ if (ret) {
+ dev_err(&bus->dev, "MDIO dis clk fail\n");
+ return ret;
+ }
+
+ /*3. reset dreq, and read reset st check*/
+ ret = mdio_sc_cfg_reg_write(mdio_dev, MDIO_SC_RESET_DREQ, 0x1,
+ MDIO_SC_RESET_ST, 0x1,
+ MDIO_CHECK_CLR_ST);
+ if (ret) {
+ dev_err(&bus->dev, "MDIO dis clk fail\n");
+ return ret;
+ }
+
+ /*4. en clk, and read clk st check*/
+ ret = mdio_sc_cfg_reg_write(mdio_dev, MDIO_SC_CLK_EN,
+ 0x1, MDIO_SC_CLK_ST, 0x1,
+ MDIO_CHECK_SET_ST);
+ if (ret)
+ dev_err(&bus->dev, "MDIO en clk fail\n");
+
+ return ret;
+}
+
+/**
+ * hns_mdio_bus_name - get mdio bus name
+ * @name: mdio bus name
+ * @np: mdio device node pointer
+ */
+static void hns_mdio_bus_name(char *name, struct device_node *np)
+{
+ const u32 *addr;
+ u64 taddr = OF_BAD_ADDR;
+
+ addr = of_get_address(np, 0, NULL, NULL);
+ if (addr)
+ taddr = of_translate_address(np, addr);
+
+ snprintf(name, MII_BUS_ID_SIZE, "%s@%llx", np->name,
+ (unsigned long long)taddr);
+}
+
+/**
+ * hns_mdio_probe - probe mdio device
+ * @pdev: mdio platform device
+ *
+ * Return 0 on success, negative on failure
+ */
+static int hns_mdio_probe(struct platform_device *pdev)
+{
+ struct device_node *np;
+ struct hns_mdio_device *mdio_dev;
+ struct mii_bus *new_bus;
+ struct resource *res;
+ int ret;
+
+ if (!pdev) {
+ dev_err(NULL, "pdev is NULL!\r\n");
+ return -ENODEV;
+ }
+ np = pdev->dev.of_node;
+ mdio_dev = devm_kzalloc(&pdev->dev, sizeof(*mdio_dev), GFP_KERNEL);
+ if (!mdio_dev)
+ return -ENOMEM;
+
+ new_bus = devm_mdiobus_alloc(&pdev->dev);
+ if (!new_bus) {
+ dev_err(&pdev->dev, "mdiobus_alloc fail!\n");
+ return -ENOMEM;
+ }
+
+ new_bus->name = MDIO_BUS_NAME;
+ new_bus->read = hns_mdio_read;
+ new_bus->write = hns_mdio_write;
+ new_bus->reset = hns_mdio_reset;
+ new_bus->priv = mdio_dev;
+ hns_mdio_bus_name(new_bus->id, np);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ mdio_dev->vbase = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(mdio_dev->vbase)) {
+ ret = PTR_ERR(mdio_dev->vbase);
+ return ret;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ mdio_dev->sys_vbase = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(mdio_dev->sys_vbase)) {
+ ret = PTR_ERR(mdio_dev->sys_vbase);
+ return ret;
+ }
+
+ new_bus->irq = devm_kcalloc(&pdev->dev, PHY_MAX_ADDR,
+ sizeof(int), GFP_KERNEL);
+ if (!new_bus->irq)
+ return -ENOMEM;
+
+ new_bus->parent = &pdev->dev;
+ platform_set_drvdata(pdev, new_bus);
+
+ ret = of_mdiobus_register(new_bus, np);
+ if (ret) {
+ dev_err(&pdev->dev, "Cannot register as MDIO bus!\n");
+ platform_set_drvdata(pdev, NULL);
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * hns_mdio_remove - remove mdio device
+ * @pdev: mdio platform device
+ *
+ * Return 0 on success, negative on failure
+ */
+static int hns_mdio_remove(struct platform_device *pdev)
+{
+ struct mii_bus *bus;
+
+ bus = platform_get_drvdata(pdev);
+
+ mdiobus_unregister(bus);
+ platform_set_drvdata(pdev, NULL);
+ return 0;
+}
+
+static const struct of_device_id hns_mdio_match[] = {
+ {.compatible = "hisilicon,mdio"},
+ {.compatible = "hisilicon,hns-mdio"},
+ {}
+};
+
+static struct platform_driver hns_mdio_driver = {
+ .probe = hns_mdio_probe,
+ .remove = hns_mdio_remove,
+ .driver = {
+ .name = MDIO_DRV_NAME,
+ .of_match_table = hns_mdio_match,
+ },
+};
+
+module_platform_driver(hns_mdio_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Huawei Tech. Co., Ltd.");
+MODULE_DESCRIPTION("Hisilicon HNS MDIO driver");
+MODULE_ALIAS("platform:" MDIO_DRV_NAME);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/