[PATCH V4 1/3] reset: hisilicon: document hisi-hi6220 reset controllers bindings
From: Chen Feng
Date: Thu Sep 17 2015 - 08:00:29 EST
Add DT bindings documentation for hi6220 SoC reset controller.
Signed-off-by: Chen Feng <puck.chen@xxxxxxxxxxxxx>
---
.../bindings/reset/hisilicon,hi6220-reset.txt | 97 ++++++++++++++++++++++
1 file changed, 97 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt
diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt b/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt
new file mode 100644
index 0000000..c0f7928
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt
@@ -0,0 +1,97 @@
+Hisilicon System Reset Controller
+======================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+The reset controller node must be a sub-node of the chip controller
+node on SoCs.
+
+Required properties:
+- compatible: may be "hisilicon,hi6220-reset-ctl"
+- reg: should be register base and length as documented in the
+ datasheet
+- #reset-cells: 1, see below
+
+Example:
+
+ reset_ctrl: reset_ctrl@f7030000 {
+ compatible = "hisilicon,hi6220-reset-ctl";
+ reg = <0x0 0xf7030000 0x0 0x1000>;
+ #reset-cells = <1>;
+ };
+
+Specifying reset lines connected to IP modules
+==============================================
+example:
+
+ uart1: uart1@..... {
+ ...
+ resets = <&reset_ctrl 0x305>;
+ ...
+ };
+
+The following RESET_INDEX values are valid for hi6220 SoC:
+ PERIPH_RSTDIS0_MMC0 = 0x000,
+ PERIPH_RSTDIS0_MMC1 = 0x001,
+ PERIPH_RSTDIS0_MMC2 = 0x002,
+ PERIPH_RSTDIS0_NANDC = 0x003,
+ PERIPH_RSTDIS0_USBOTG_BUS = 0x004,
+ PERIPH_RSTDIS0_POR_PICOPHY = 0x005,
+ PERIPH_RSTDIS0_USBOTG = 0x006,
+ PERIPH_RSTDIS0_USBOTG_32K = 0x007,
+
+ PERIPH_RSTDIS1_HIFI = 0x100,
+ PERIPH_RSTDIS1_DIGACODEC = 0x105,
+
+ PERIPH_RSTEN2_IPF = 0x200,
+ PERIPH_RSTEN2_SOCP = 0x201,
+ PERIPH_RSTEN2_DMAC = 0x202,
+ PERIPH_RSTEN2_SECENG = 0x203,
+ PERIPH_RSTEN2_ABB = 0x204,
+ PERIPH_RSTEN2_HPM0 = 0x205,
+ PERIPH_RSTEN2_HPM1 = 0x206,
+ PERIPH_RSTEN2_HPM2 = 0x207,
+ PERIPH_RSTEN2_HPM3 = 0x208,
+
+ PERIPH_RSTEN3_CSSYS = 0x300,
+ PERIPH_RSTEN3_I2C0 = 0x301,
+ PERIPH_RSTEN3_I2C1 = 0x302,
+ PERIPH_RSTEN3_I2C2 = 0x303,
+ PERIPH_RSTEN3_I2C3 = 0x304,
+ PERIPH_RSTEN3_UART1 = 0x305,
+ PERIPH_RSTEN3_UART2 = 0x306,
+ PERIPH_RSTEN3_UART3 = 0x307,
+ PERIPH_RSTEN3_UART4 = 0x308,
+ PERIPH_RSTEN3_SSP = 0x309,
+ PERIPH_RSTEN3_PWM = 0x30a,
+ PERIPH_RSTEN3_BLPWM = 0x30b,
+ PERIPH_RSTEN3_TSENSOR = 0x30c,
+ PERIPH_RSTEN3_DAPB = 0x312,
+ PERIPH_RSTEN3_HKADC = 0x313,
+ PERIPH_RSTEN3_CODEC_SSI = 0x314,
+ PERIPH_RSTEN3_PMUSSI1 = 0x316,
+
+ PERIPH_RSTEN8_RS0 = 0x400,
+ PERIPH_RSTEN8_RS2 = 0x401,
+ PERIPH_RSTEN8_RS3 = 0x402,
+ PERIPH_RSTEN8_MS0 = 0x403,
+ PERIPH_RSTEN8_MS2 = 0x405,
+ PERIPH_RSTEN8_XG2RAM0 = 0x406,
+ PERIPH_RSTEN8_X2SRAM_TZMA = 0x407,
+ PERIPH_RSTEN8_SRAM = 0x408,
+ PERIPH_RSTEN8_HARQ = 0x40a,
+ PERIPH_RSTEN8_DDRC = 0x40c,
+ PERIPH_RSTEN8_DDRC_APB = 0x40d,
+ PERIPH_RSTEN8_DDRPACK_APB = 0x40e,
+ PERIPH_RSTEN8_DDRT = 0x411,
+
+ PERIPH_RSDIST9_CARM_DAP = 0x500,
+ PERIPH_RSDIST9_CARM_ATB = 0x501,
+ PERIPH_RSDIST9_CARM_LBUS = 0x502,
+ PERIPH_RSDIST9_CARM_POR = 0x503,
+ PERIPH_RSDIST9_CARM_CORE = 0x504,
+ PERIPH_RSDIST9_CARM_DBG = 0x505,
+ PERIPH_RSDIST9_CARM_L2 = 0x506,
+ PERIPH_RSDIST9_CARM_SOCDBG = 0x507,
+ PERIPH_RSDIST9_CARM_ETM = 0x508,
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/