Re: ATL1E 0000:02:00.0: swiotlb buffer is full (sz: 529461 bytes)

From: Markus Trippelsdorf
Date: Fri Sep 18 2015 - 12:55:49 EST

Next message: Laura Abbott: "Re: [RFC][PATCH] Add spurious wakeup quirk for Lynxpoint controllers"
Previous message: Dan Williams: "Re: [PATCH 1/2 v2] airo: fix IW_AUTH_ALG_OPEN_SYSTEM"
In reply to: Markus Trippelsdorf: "Re: ATL1E 0000:02:00.0: swiotlb buffer is full (sz: 529461 bytes)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 2015.09.18 at 16:42 +0000, Chris Snook wrote:
> I think atl1e is the victim here, not the cause. It's probably the last
> device being brought up that wants to use the swiotlb, so you haven't seen
> other devices failing for the same reason. Can you post your dmesg or boot
> log from both a boot where it works and one where it doesn't, as well as
> lspci -vvv? You may be able to work around it by passing swiotlb=32768 on
> the kernel command line, which doubles the size of that buffer from the
> default.
>
> The size of that attempted allocation is strange though. It's slightly
> larger than 512K, and it's odd, which suggests we may have a bug in
> calculating the size of that allocation, though we may be faithfully
> working with what we get from the hardware.

The requested files are attached.

--
Markus
Linux version 4.3.0-rc1-00131-ga7d5c1897198-dirty (markus@x4) (gcc version 6.0.0 20150917 (experimental) (GCC) ) #119 SMP Fri Sep 18 08:07:44 CEST 2015
Command line: BOOT_IMAGE=/bzImage root=PARTUUID=c591cae0-c996-4910-a15a-fb9556df395e init=/sbin/minit fbcon=rotate:3 radeon.dpm=1 radeon.audio=0 drm_kms_helper.poll=0 quiet
KERNEL supported cpus:
AMD AuthenticAMD
tseg: 0000000000
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e6000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dfe8ffff] usable
BIOS-e820: [mem 0x00000000dfe90000-0x00000000dfea7fff] ACPI data
BIOS-e820: [mem 0x00000000dfea8000-0x00000000dfecffff] ACPI NVS
BIOS-e820: [mem 0x00000000dfed0000-0x00000000dfefffff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: System manufacturer System Product Name/M4A78T-E, BIOS 3503 04/13/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000220000000 aka 8704M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdfe90 max_arch_pfn = 0x400000000
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x021da000, 0x021dafff] PGTABLE
BRK [0x021db000, 0x021dbfff] PGTABLE
BRK [0x021dc000, 0x021dcfff] PGTABLE
init_memory_mapping: [mem 0x21fe00000-0x21fffffff]
[mem 0x21fe00000-0x21fffffff] page 2M
BRK [0x021dd000, 0x021ddfff] PGTABLE
init_memory_mapping: [mem 0x200000000-0x21fdfffff]
[mem 0x200000000-0x21fdfffff] page 2M
init_memory_mapping: [mem 0x00100000-0xdfe8ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xdfdfffff] page 2M
[mem 0xdfe00000-0xdfe8ffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 1G
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FB880 000024 (v02 ACPIAM)
ACPI: XSDT 0x00000000DFE90100 00005C (v01 041311 XSDT1656 20110413 MSFT 00000097)
ACPI: FACP 0x00000000DFE90290 0000F4 (v03 041311 FACP1656 20110413 MSFT 00000097)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150818/tbfadt-654)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20150818/tbfadt-623)
ACPI: DSDT 0x00000000DFE90450 00E6FE (v01 A1152 A1152000 00000000 INTL 20060113)
ACPI: FACS 0x00000000DFEA8000 000040
ACPI: FACS 0x00000000DFEA8000 000040
ACPI: APIC 0x00000000DFE90390 00007C (v01 041311 APIC1656 20110413 MSFT 00000097)
ACPI: MCFG 0x00000000DFE90410 00003C (v01 041311 OEMMCFG 20110413 MSFT 00000097)
ACPI: OEMB 0x00000000DFEA8040 000072 (v01 041311 OEMB1656 20110413 MSFT 00000097)
ACPI: SRAT 0x00000000DFE9F450 0000E8 (v01 AMD FAM_F_10 00000002 AMD 00000001)
ACPI: HPET 0x00000000DFE9F540 000038 (v01 041311 OEMHPET 20110413 MSFT 00000097)
ACPI: SSDT 0x00000000DFE9F580 00088C (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217600000-ffff88021f5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000021fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000dfe8ffff]
node 0: [mem 0x0000000100000000-0x000000021fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000021fffffff]
On node 0 totalpages: 2096686
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 14267 pages used for memmap
DMA32 zone: 913040 pages, LIFO batch:31
Normal zone: 18432 pages used for memmap
Normal zone: 1179648 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
e820: [mem 0xdff00000-0xffefffff] available for PCI devices
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88021fc00000 s84504 r0 d30184 u524288
pcpu-alloc: s84504 r0 d30184 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2063902
Kernel command line: BOOT_IMAGE=/bzImage root=PARTUUID=c591cae0-c996-4910-a15a-fb9556df395e init=/sbin/minit fbcon=rotate:3 radeon.dpm=1 radeon.audio=0 drm_kms_helper.poll=0 quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Memory: 8158340K/8386744K available (10635K kernel code, 446K rwdata, 2124K rodata, 744K init, 656K bss, 228404K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
NR_IRQS:4352 nr_irqs:456 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3210.517 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6423.57 BogoMIPS (lpj=10701723)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150818
ACPI: 2 ACPI AML tables successfully acquired and loaded
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
Freeing SMP alternatives memory: 40K (ffffffff8212b000 - ffffffff82135000)
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Phenom(tm) II X4 955 Processor (family: 0x10, model: 0x4, stepping: 0x2)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
MCE: In-kernel MCE decoding enabled.
x86: Booting SMP configuration:
.... node #0, CPUs: #1
process: System has AMD C1E enabled
process: Switch to broadcast mode on CPU1
#2
process: Switch to broadcast mode on CPU2
#3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (25694.30 BogoMIPS)
process: Switch to broadcast mode on CPU3
process: Switch to broadcast mode on CPU0
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
xor: measuring software checksum speed
prefetch64-sse: 13339.200 MB/sec
generic_sse: 12679.200 MB/sec
xor: using function: prefetch64-sse (13339.200 MB/sec)
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [1000, ffffff]
TOM: 00000000e0000000 aka 3584M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [e0000000, efffffff] ==> none
node 0 link 0: mmio [f0000000, fbcfffff]
node 0 link 0: mmio [fbd00000, fbefffff]
node 0 link 0: mmio [fbf00000, ffefffff]
TOM2: 0000000220000000 aka 8704M
bus: [bus 00-07] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xf0000000-0xffffffff]
bus: 00 [mem 0x220000000-0xfcffffffff]
ACPI: bus type PCI registered
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
raid6: sse2x1 gen() 5511 MB/s
raid6: sse2x1 xor() 4340 MB/s
raid6: sse2x2 gen() 8711 MB/s
raid6: sse2x2 xor() 7282 MB/s
raid6: sse2x4 gen() 8094 MB/s
raid6: sse2x4 xor() 3599 MB/s
raid6: using algorithm sse2x2 gen() 8711 MB/s
raid6: .... xor() 7282 MB/s, rmw enabled
raid6: using intx1 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xdff00000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
pci 0000:00:01.0: [1022:9602] type 01 class 0x060400
pci 0000:00:06.0: [1022:9606] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xc000-0xc007]
pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb003]
pci 0000:00:11.0: reg 0x18: [io 0xa000-0xa007]
pci 0000:00:11.0: reg 0x1c: [io 0x9000-0x9003]
pci 0000:00:11.0: reg 0x20: [io 0x8000-0x800f]
pci 0000:00:11.0: reg 0x24: [mem 0xfbcffc00-0xfbcfffff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfbcfd000-0xfbcfdfff]
pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:12.1: reg 0x10: [mem 0xfbcfe000-0xfbcfefff]
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfbcff800-0xfbcff8ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfbcfb000-0xfbcfbfff]
pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:13.1: reg 0x10: [mem 0xfbcfc000-0xfbcfcfff]
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfbcff400-0xfbcff4ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfbcf4000-0xfbcf7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfbcfa000-0xfbcfafff]
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xfbd00000-0xfbefffff]
pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:01:05.0: [1002:9614] type 00 class 0x030000
pci 0000:01:05.0: reg 0x10: [mem 0xf0000000-0xf7ffffff pref]
pci 0000:01:05.0: reg 0x14: [io 0xd000-0xd0ff]
pci 0000:01:05.0: reg 0x18: [mem 0xfbee0000-0xfbeeffff]
pci 0000:01:05.0: reg 0x24: [mem 0xfbd00000-0xfbdfffff]
pci 0000:01:05.0: supports D1 D2
pci 0000:01:05.1: [1002:960f] type 00 class 0x040300
pci 0000:01:05.1: reg 0x10: [mem 0xfbefc000-0xfbefffff]
pci 0000:01:05.1: supports D1 D2
pci 0000:00:06.0: PCI bridge to [bus 02]
pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
pci 0000:00:06.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:02:00.0: [1969:1026] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xfbfc0000-0xfbffffff 64bit]
pci 0000:02:00.0: reg 0x18: [io 0xec00-0xec7f]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xdff00000-0xdfffffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *4 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: Enabled 1 GPEs in block 00 to 1F
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xdfe90000-0xdfffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: [io 0x040b] has been reserved
system 00:03: [io 0x04d6] has been reserved
system 00:03: [io 0x0c00-0x0c01] has been reserved
system 00:03: [io 0x0c14] has been reserved
system 00:03: [io 0x0c50-0x0c51] has been reserved
system 00:03: [io 0x0c52] has been reserved
system 00:03: [io 0x0c6c] has been reserved
system 00:03: [io 0x0c6f] has been reserved
system 00:03: [io 0x0cd0-0x0cd1] has been reserved
system 00:03: [io 0x0cd2-0x0cd3] has been reserved
system 00:03: [io 0x0cd4-0x0cd5] has been reserved
system 00:03: [io 0x0cd6-0x0cd7] has been reserved
system 00:03: [io 0x0cd8-0x0cdf] has been reserved
system 00:03: [io 0x0b00-0x0b3f] has been reserved
system 00:03: [io 0x0800-0x089f] could not be reserved
system 00:03: [io 0x0b00-0x0b0f] has been reserved
system 00:03: [io 0x0b20-0x0b3f] has been reserved
system 00:03: [io 0x0900-0x090f] has been reserved
system 00:03: [io 0x0910-0x091f] has been reserved
system 00:03: [io 0xfe00-0xfefe] has been reserved
system 00:03: [mem 0xdff00000-0xdfffffff] has been reserved
system 00:03: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:03: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x0230-0x023f] has been reserved
system 00:04: [io 0x0290-0x029f] has been reserved
system 00:04: [io 0x0f40-0x0f4f] has been reserved
system 00:04: [io 0x0a30-0x0a3f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:06: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:06: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:06: [mem 0x00100000-0xdfefffff] could not be reserved
system 00:06: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xfbd00000-0xfbefffff]
pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 02]
pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
pci 0000:00:06.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:14.4: PCI bridge to [bus 03]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xdff00000-0xdfffffff window]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfbd00000-0xfbefffff]
pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:03: resource 8 [mem 0xdff00000-0xdfffffff window]
pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff window]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
pci 0000:01:05.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xdbe90000-0xdfe90000] (64MB) mapped at [ffff8800dbe90000-ffff8800dfe8ffff]
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
microcode: CPU0: patch_level=0x010000c6
microcode: CPU1: patch_level=0x010000c6
microcode: CPU2: patch_level=0x010000c6
microcode: CPU3: patch_level=0x010000c6
microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
futex hash table entries: 1024 (order: 4, 65536 bytes)
9p: Installing v9fs 9p2000 file system support
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
ACPI: processor limited to max C-state 1
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[drm] Initialized drm 1.1.0 20060810
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (RS780 0x1002:0x9614 0x1043:0x834D).
[drm] register mmio base: 0xFBEE0000
[drm] register mmio size: 65536
ATOM BIOS: 113
radeon 0000:01:05.0: VRAM: 128M 0x00000000C0000000 - 0x00000000C7FFFFFF (128M used)
radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 32bits DDR
[TTM] Zone kernel: Available graphics memory: 4079190 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 128M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Loading RS780 Microcode
== power state 0 ==
ui class: none
internal class: boot
caps: video
uvd vclk: 0 dclk: 0
power level 0 sclk: 50000 vddc_index: 2
power level 1 sclk: 50000 vddc_index: 2
status: c r b
== power state 1 ==
ui class: performance
internal class: none
caps: video
uvd vclk: 0 dclk: 0
power level 0 sclk: 50000 vddc_index: 1
power level 1 sclk: 70000 vddc_index: 2
status:
== power state 2 ==
ui class: none
internal class: uvd
caps: video
uvd vclk: 53300 dclk: 40000
power level 0 sclk: 50000 vddc_index: 1
power level 1 sclk: 50000 vddc_index: 1
status:
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
radeon 0000:01:05.0: WB enabled
radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff88021638ac00
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:05.0: radeon: MSI limited to 32-bit
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm] DVI-D-1
[drm] HPD3
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] DFP3: INTERNAL_KLDSCP_LVTMA
switching from power state:
ui class: none
internal class: boot
caps: video
uvd vclk: 0 dclk: 0
power level 0 sclk: 50000 vddc_index: 2
power level 1 sclk: 50000 vddc_index: 2
status: c b
switching to power state:
ui class: performance
internal class: none
caps: video
uvd vclk: 0 dclk: 0
power level 0 sclk: 50000 vddc_index: 1
power level 1 sclk: 70000 vddc_index: 2
status: r
[drm] fb mappable at 0xF0141000
[drm] vram apper at 0xF0000000
[drm] size 7299072
[drm] fb depth is 24
[drm] pitch is 6912
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 131x105
radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.43.0 20080528 for 0000:01:05.0 on minor 0
loop: module loaded
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffd00 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffd80 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffe00 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffe80 irq 22
ata5: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcfff00 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcfff80 irq 22
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfbcff800
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 19, io mem 0xfbcff400
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:12.0: irq 16, io mem 0xfbcfd000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci-pci 0000:00:12.1: OHCI PCI host controller
ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.1: irq 16, io mem 0xfbcfe000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xfbcfb000
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci-pci 0000:00:13.1: OHCI PCI host controller
ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:13.1: irq 18, io mem 0xfbcfc000
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:14.5: irq 18, io mem 0xfbcfa000
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-8: OCZ VERTEX-TURBO, 1.7, max UDMA/133
ata1.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata3.00: ATA-9: M4-CT128M4SSD2, 0309, max UDMA/100
ata3.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/100
ata2.00: ATA-9: ST2000DM001-1CH164, CC29, max UDMA/133
ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA OCZ VERTEX-TURBO 1.7 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC29 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: Direct-Access ATA M4-CT128M4SSD2 0309 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sdc: sdc1 sdc2 sdc3
sd 2:0:0:0: [sdc] Attached SCSI disk
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usbcore: registered new interface driver usblp
usbcore: registered new interface driver usb-storage
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC enabled.
EDAC amd64: F10h detected (node 0).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0: 1024MB 1: 1024MB
EDAC amd64: MC: 2: 1024MB 3: 1024MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC MC: DCT1 chip selects:
EDAC amd64: MC: 0: 1024MB 1: 1024MB
EDAC amd64: MC: 2: 1024MB 3: 1024MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC amd64: using x4 syndromes.
EDAC amd64: MCT channel count: 2
EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbcore: registered new interface driver snd-usb-audio
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
ctnetlink v0.93: registering with nfnetlink.
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
9pnet: Installing 9P2000 support
registered taskstats version 1
Btrfs loaded
rtc_cmos 00:01: setting system clock to 2015-09-18 06:11:49 UTC (1442556709)
acpi-cpufreq: overriding BIOS provided _PSD data
ALSA device list:
No soundcards found.
snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708S: line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line
snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_via hdaudioC0D0: dig-out=0x20/0x21
snd_hda_codec_via hdaudioC0D0: inputs:
snd_hda_codec_via hdaudioC0D0: Rear Mic=0x1a
snd_hda_codec_via hdaudioC0D0: Front Mic=0x1e
snd_hda_codec_via hdaudioC0D0: Line=0x1b
snd_hda_codec_via hdaudioC0D0: CD=0x1f
snd_hda_codec_generic hdaudioC1D0: autoconfig for ID 791a: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_generic hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_generic hdaudioC1D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_generic hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_generic hdaudioC1D0: dig-out=0x3/0x0
snd_hda_codec_generic hdaudioC1D0: inputs:
input: HDA ATI HDMI HDMI as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1/input1
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input2
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
UDF-fs: warning (device sdc3): udf_fill_super: No partition found (2)
BTRFS: device fsid 7ef56edc-673e-452e-9e05-3fabf074168b devid 1 transid 25153 /dev/root
BTRFS info (device sdc3): disk space caching is enabled
BTRFS: has skinny extents
BTRFS: detected SSD devices, enabling SSD mode
VFS: Mounted root (btrfs filesystem) readonly on device 0:15.
devtmpfs: mounted
Freeing unused kernel memory: 744K (ffffffff82071000 - ffffffff8212b000)
Write protecting the kernel read-only data: 16384k
Freeing unused kernel memory: 1644K (ffff880001a65000 - ffff880001c00000)
Freeing unused kernel memory: 1972K (ffff880001e13000 - ffff880002000000)
usb 3-1: new low-speed USB device number 2 using ohci-pci
usb 4-2: new full-speed USB device number 2 using ohci-pci
input: HID 046a:0011 as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:046A:0011.0001/input/input11
BTRFS: device fsid 6b7d75bf-3d12-409c-88ed-500ac6b78510 devid 1 transid 396337 /dev/sdb2
BTRFS info (device sdb2): disk space caching is enabled
hid-generic 0003:046A:0011.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 046a:0011] on usb-0000:00:12.0-1/input0
tsc: Refined TSC clocksource calibration: 3210.826 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e483d1f2ca, max_idle_ns: 440795239699 ns
logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.1-2/input2
input: Logitech T400 as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.2/0003:046D:C52B.0004/0003:046D:4026.0005/input/input12
logitech-hidpp-device 0003:046D:4026.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech T400] on usb-0000:00:12.1-2:1
clocksource: Switched to clocksource tsc
random: nonblocking pool is initialized
BTRFS: device fsid 24cee7e4-9093-4f86-aa73-d8a59d7f3c6c devid 1 transid 16527 /dev/sda3
BTRFS info (device sda3): disk space caching is enabled
BTRFS: has skinny extents
BTRFS: detected SSD devices, enabling SSD mode
ATL1E 0000:02:00.0 eth0: NIC Link is Up <1000 Mbps Full Duplex>
BTRFS info (device sdc3): disk space caching is enabled
microcode: CPU0: new patch_level=0x010000db
microcode: CPU1: new patch_level=0x010000db
microcode: CPU2: new patch_level=0x010000db
microcode: CPU3: new patch_level=0x010000db
Adding 4095996k swap on /dev/sdb1. Priority:-1 extents:1 across:4095996k
Linux version 4.3.0-rc1-00131-ga7d5c1897198-dirty (markus@x4) (gcc version 6.0.0 20150917 (experimental) (GCC) ) #119 SMP Fri Sep 18 08:07:44 CEST 2015
Command line: BOOT_IMAGE=/bzImage root=PARTUUID=c591cae0-c996-4910-a15a-fb9556df395e init=/sbin/minit fbcon=rotate:3 radeon.dpm=1 radeon.audio=0 drm_kms_helper.poll=0 quiet
KERNEL supported cpus:
AMD AuthenticAMD
tseg: 0000000000
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e6000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dfe8ffff] usable
BIOS-e820: [mem 0x00000000dfe90000-0x00000000dfea7fff] ACPI data
BIOS-e820: [mem 0x00000000dfea8000-0x00000000dfecffff] ACPI NVS
BIOS-e820: [mem 0x00000000dfed0000-0x00000000dfefffff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: System manufacturer System Product Name/M4A78T-E, BIOS 3503 04/13/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000220000000 aka 8704M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdfe90 max_arch_pfn = 0x400000000
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x021da000, 0x021dafff] PGTABLE
BRK [0x021db000, 0x021dbfff] PGTABLE
BRK [0x021dc000, 0x021dcfff] PGTABLE
init_memory_mapping: [mem 0x21fe00000-0x21fffffff]
[mem 0x21fe00000-0x21fffffff] page 2M
BRK [0x021dd000, 0x021ddfff] PGTABLE
init_memory_mapping: [mem 0x200000000-0x21fdfffff]
[mem 0x200000000-0x21fdfffff] page 2M
init_memory_mapping: [mem 0x00100000-0xdfe8ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xdfdfffff] page 2M
[mem 0xdfe00000-0xdfe8ffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 1G
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FB880 000024 (v02 ACPIAM)
ACPI: XSDT 0x00000000DFE90100 00005C (v01 041311 XSDT1656 20110413 MSFT 00000097)
ACPI: FACP 0x00000000DFE90290 0000F4 (v03 041311 FACP1656 20110413 MSFT 00000097)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150818/tbfadt-654)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20150818/tbfadt-623)
ACPI: DSDT 0x00000000DFE90450 00E6FE (v01 A1152 A1152000 00000000 INTL 20060113)
ACPI: FACS 0x00000000DFEA8000 000040
ACPI: FACS 0x00000000DFEA8000 000040
ACPI: APIC 0x00000000DFE90390 00007C (v01 041311 APIC1656 20110413 MSFT 00000097)
ACPI: MCFG 0x00000000DFE90410 00003C (v01 041311 OEMMCFG 20110413 MSFT 00000097)
ACPI: OEMB 0x00000000DFEA8040 000072 (v01 041311 OEMB1656 20110413 MSFT 00000097)
ACPI: SRAT 0x00000000DFE9F450 0000E8 (v01 AMD FAM_F_10 00000002 AMD 00000001)
ACPI: HPET 0x00000000DFE9F540 000038 (v01 041311 OEMHPET 20110413 MSFT 00000097)
ACPI: SSDT 0x00000000DFE9F580 00088C (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217600000-ffff88021f5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000021fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000dfe8ffff]
node 0: [mem 0x0000000100000000-0x000000021fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000021fffffff]
On node 0 totalpages: 2096686
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 14267 pages used for memmap
DMA32 zone: 913040 pages, LIFO batch:31
Normal zone: 18432 pages used for memmap
Normal zone: 1179648 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
e820: [mem 0xdff00000-0xffefffff] available for PCI devices
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88021fc00000 s84504 r0 d30184 u524288
pcpu-alloc: s84504 r0 d30184 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2063902
Kernel command line: BOOT_IMAGE=/bzImage root=PARTUUID=c591cae0-c996-4910-a15a-fb9556df395e init=/sbin/minit fbcon=rotate:3 radeon.dpm=1 radeon.audio=0 drm_kms_helper.poll=0 quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Memory: 8158340K/8386744K available (10635K kernel code, 446K rwdata, 2124K rodata, 744K init, 656K bss, 228404K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
NR_IRQS:4352 nr_irqs:456 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3210.870 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6424.31 BogoMIPS (lpj=10702900)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150818
ACPI: 2 ACPI AML tables successfully acquired and loaded
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
Freeing SMP alternatives memory: 40K (ffffffff8212b000 - ffffffff82135000)
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Phenom(tm) II X4 955 Processor (family: 0x10, model: 0x4, stepping: 0x2)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
MCE: In-kernel MCE decoding enabled.
x86: Booting SMP configuration:
.... node #0, CPUs: #1
process: System has AMD C1E enabled
process: Switch to broadcast mode on CPU1
#2
process: Switch to broadcast mode on CPU2
#3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (25697.25 BogoMIPS)
process: Switch to broadcast mode on CPU3
process: Switch to broadcast mode on CPU0
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
xor: measuring software checksum speed
prefetch64-sse: 13340.400 MB/sec
generic_sse: 12678.000 MB/sec
xor: using function: prefetch64-sse (13340.400 MB/sec)
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [1000, ffffff]
TOM: 00000000e0000000 aka 3584M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [e0000000, efffffff] ==> none
node 0 link 0: mmio [f0000000, fbcfffff]
node 0 link 0: mmio [fbd00000, fbefffff]
node 0 link 0: mmio [fbf00000, ffefffff]
TOM2: 0000000220000000 aka 8704M
bus: [bus 00-07] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xf0000000-0xffffffff]
bus: 00 [mem 0x220000000-0xfcffffffff]
ACPI: bus type PCI registered
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
raid6: sse2x1 gen() 5582 MB/s
raid6: sse2x1 xor() 4349 MB/s
raid6: sse2x2 gen() 8666 MB/s
raid6: sse2x2 xor() 7323 MB/s
raid6: sse2x4 gen() 8136 MB/s
raid6: sse2x4 xor() 3675 MB/s
raid6: using algorithm sse2x2 gen() 8666 MB/s
raid6: .... xor() 7323 MB/s, rmw enabled
raid6: using intx1 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xdff00000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
pci 0000:00:01.0: [1022:9602] type 01 class 0x060400
pci 0000:00:06.0: [1022:9606] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xc000-0xc007]
pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb003]
pci 0000:00:11.0: reg 0x18: [io 0xa000-0xa007]
pci 0000:00:11.0: reg 0x1c: [io 0x9000-0x9003]
pci 0000:00:11.0: reg 0x20: [io 0x8000-0x800f]
pci 0000:00:11.0: reg 0x24: [mem 0xfbcffc00-0xfbcfffff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfbcfd000-0xfbcfdfff]
pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:12.1: reg 0x10: [mem 0xfbcfe000-0xfbcfefff]
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfbcff800-0xfbcff8ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfbcfb000-0xfbcfbfff]
pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:13.1: reg 0x10: [mem 0xfbcfc000-0xfbcfcfff]
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfbcff400-0xfbcff4ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfbcf4000-0xfbcf7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfbcfa000-0xfbcfafff]
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xfbd00000-0xfbefffff]
pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:01:05.0: [1002:9614] type 00 class 0x030000
pci 0000:01:05.0: reg 0x10: [mem 0xf0000000-0xf7ffffff pref]
pci 0000:01:05.0: reg 0x14: [io 0xd000-0xd0ff]
pci 0000:01:05.0: reg 0x18: [mem 0xfbee0000-0xfbeeffff]
pci 0000:01:05.0: reg 0x24: [mem 0xfbd00000-0xfbdfffff]
pci 0000:01:05.0: supports D1 D2
pci 0000:01:05.1: [1002:960f] type 00 class 0x040300
pci 0000:01:05.1: reg 0x10: [mem 0xfbefc000-0xfbefffff]
pci 0000:01:05.1: supports D1 D2
pci 0000:00:06.0: PCI bridge to [bus 02]
pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
pci 0000:00:06.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:02:00.0: [1969:1026] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xfbfc0000-0xfbffffff 64bit]
pci 0000:02:00.0: reg 0x18: [io 0xec00-0xec7f]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xdff00000-0xdfffffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *4 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: Enabled 1 GPEs in block 00 to 1F
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xdfe90000-0xdfffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: [io 0x040b] has been reserved
system 00:03: [io 0x04d6] has been reserved
system 00:03: [io 0x0c00-0x0c01] has been reserved
system 00:03: [io 0x0c14] has been reserved
system 00:03: [io 0x0c50-0x0c51] has been reserved
system 00:03: [io 0x0c52] has been reserved
system 00:03: [io 0x0c6c] has been reserved
system 00:03: [io 0x0c6f] has been reserved
system 00:03: [io 0x0cd0-0x0cd1] has been reserved
system 00:03: [io 0x0cd2-0x0cd3] has been reserved
system 00:03: [io 0x0cd4-0x0cd5] has been reserved
system 00:03: [io 0x0cd6-0x0cd7] has been reserved
system 00:03: [io 0x0cd8-0x0cdf] has been reserved
system 00:03: [io 0x0b00-0x0b3f] has been reserved
system 00:03: [io 0x0800-0x089f] could not be reserved
system 00:03: [io 0x0b00-0x0b0f] has been reserved
system 00:03: [io 0x0b20-0x0b3f] has been reserved
system 00:03: [io 0x0900-0x090f] has been reserved
system 00:03: [io 0x0910-0x091f] has been reserved
system 00:03: [io 0xfe00-0xfefe] has been reserved
system 00:03: [mem 0xdff00000-0xdfffffff] has been reserved
system 00:03: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:03: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x0230-0x023f] has been reserved
system 00:04: [io 0x0290-0x029f] has been reserved
system 00:04: [io 0x0f40-0x0f4f] has been reserved
system 00:04: [io 0x0a30-0x0a3f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:06: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:06: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:06: [mem 0x00100000-0xdfefffff] could not be reserved
system 00:06: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xfbd00000-0xfbefffff]
pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 02]
pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
pci 0000:00:06.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:14.4: PCI bridge to [bus 03]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xdff00000-0xdfffffff window]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfbd00000-0xfbefffff]
pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:03: resource 8 [mem 0xdff00000-0xdfffffff window]
pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff window]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
pci 0000:01:05.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xdbe90000-0xdfe90000] (64MB) mapped at [ffff8800dbe90000-ffff8800dfe8ffff]
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
microcode: CPU0: patch_level=0x010000c6
microcode: CPU1: patch_level=0x010000c6
microcode: CPU2: patch_level=0x010000c6
microcode: CPU3: patch_level=0x010000c6
microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
futex hash table entries: 1024 (order: 4, 65536 bytes)
9p: Installing v9fs 9p2000 file system support
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
ACPI: processor limited to max C-state 1
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[drm] Initialized drm 1.1.0 20060810
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (RS780 0x1002:0x9614 0x1043:0x834D).
[drm] register mmio base: 0xFBEE0000
[drm] register mmio size: 65536
ATOM BIOS: 113
radeon 0000:01:05.0: VRAM: 128M 0x00000000C0000000 - 0x00000000C7FFFFFF (128M used)
radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 32bits DDR
[TTM] Zone kernel: Available graphics memory: 4079190 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 128M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Loading RS780 Microcode
== power state 0 ==
ui class: none
internal class: boot
caps: video
uvd vclk: 0 dclk: 0
power level 0 sclk: 50000 vddc_index: 2
power level 1 sclk: 50000 vddc_index: 2
status: c r b
== power state 1 ==
ui class: performance
internal class: none
caps: video
uvd vclk: 0 dclk: 0
power level 0 sclk: 50000 vddc_index: 1
power level 1 sclk: 70000 vddc_index: 2
status:
== power state 2 ==
ui class: none
internal class: uvd
caps: video
uvd vclk: 53300 dclk: 40000
power level 0 sclk: 50000 vddc_index: 1
power level 1 sclk: 50000 vddc_index: 1
status:
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
radeon 0000:01:05.0: WB enabled
radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff8800db929c00
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:05.0: radeon: MSI limited to 32-bit
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm] DVI-D-1
[drm] HPD3
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] DFP3: INTERNAL_KLDSCP_LVTMA
switching from power state:
ui class: none
internal class: boot
caps: video
uvd vclk: 0 dclk: 0
power level 0 sclk: 50000 vddc_index: 2
power level 1 sclk: 50000 vddc_index: 2
status: c b
switching to power state:
ui class: performance
internal class: none
caps: video
uvd vclk: 0 dclk: 0
power level 0 sclk: 50000 vddc_index: 1
power level 1 sclk: 70000 vddc_index: 2
status: r
[drm] fb mappable at 0xF0141000
[drm] vram apper at 0xF0000000
[drm] size 7299072
[drm] fb depth is 24
[drm] pitch is 6912
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 131x105
radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.43.0 20080528 for 0000:01:05.0 on minor 0
loop: module loaded
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffd00 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffd80 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffe00 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffe80 irq 22
ata5: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcfff00 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcfff80 irq 22
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfbcff800
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 19, io mem 0xfbcff400
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:12.0: irq 16, io mem 0xfbcfd000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci-pci 0000:00:12.1: OHCI PCI host controller
ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.1: irq 16, io mem 0xfbcfe000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xfbcfb000
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci-pci 0000:00:13.1: OHCI PCI host controller
ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:13.1: irq 18, io mem 0xfbcfc000
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:14.5: irq 18, io mem 0xfbcfa000
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: OCZ VERTEX-TURBO, 1.7, max UDMA/133
ata1.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata3.00: ATA-9: M4-CT128M4SSD2, 0309, max UDMA/100
ata3.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: ATA-9: ST2000DM001-1CH164, CC29, max UDMA/133
ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/100
ata2.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA OCZ VERTEX-TURBO 1.7 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
scsi 1:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC29 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: Direct-Access ATA M4-CT128M4SSD2 0309 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sdc: sdc1 sdc2 sdc3
sd 2:0:0:0: [sdc] Attached SCSI disk
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usbcore: registered new interface driver usblp
usbcore: registered new interface driver usb-storage
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC enabled.
EDAC amd64: F10h detected (node 0).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0: 1024MB 1: 1024MB
EDAC amd64: MC: 2: 1024MB 3: 1024MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC MC: DCT1 chip selects:
EDAC amd64: MC: 0: 1024MB 1: 1024MB
EDAC amd64: MC: 2: 1024MB 3: 1024MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC amd64: using x4 syndromes.
EDAC amd64: MCT channel count: 2
EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbcore: registered new interface driver snd-usb-audio
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
ctnetlink v0.93: registering with nfnetlink.
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
9pnet: Installing 9P2000 support
registered taskstats version 1
Btrfs loaded
rtc_cmos 00:01: setting system clock to 2015-09-18 06:10:55 UTC (1442556655)
acpi-cpufreq: overriding BIOS provided _PSD data
ALSA device list:
No soundcards found.
snd_hda_codec_generic hdaudioC1D0: autoconfig for ID 791a: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_generic hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_generic hdaudioC1D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_generic hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_generic hdaudioC1D0: dig-out=0x3/0x0
snd_hda_codec_generic hdaudioC1D0: inputs:
snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708S: line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line
snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_via hdaudioC0D0: dig-out=0x20/0x21
snd_hda_codec_via hdaudioC0D0: inputs:
snd_hda_codec_via hdaudioC0D0: Rear Mic=0x1a
snd_hda_codec_via hdaudioC0D0: Front Mic=0x1e
snd_hda_codec_via hdaudioC0D0: Line=0x1b
snd_hda_codec_via hdaudioC0D0: CD=0x1f
input: HDA ATI HDMI HDMI as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1/input1
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input2
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
UDF-fs: warning (device sdc3): udf_fill_super: No partition found (2)
BTRFS: device fsid 7ef56edc-673e-452e-9e05-3fabf074168b devid 1 transid 25151 /dev/root
BTRFS info (device sdc3): disk space caching is enabled
BTRFS: has skinny extents
BTRFS: detected SSD devices, enabling SSD mode
VFS: Mounted root (btrfs filesystem) readonly on device 0:15.
devtmpfs: mounted
Freeing unused kernel memory: 744K (ffffffff82071000 - ffffffff8212b000)
Write protecting the kernel read-only data: 16384k
Freeing unused kernel memory: 1644K (ffff880001a65000 - ffff880001c00000)
Freeing unused kernel memory: 1972K (ffff880001e13000 - ffff880002000000)
usb 3-1: new low-speed USB device number 2 using ohci-pci
usb 4-2: new full-speed USB device number 2 using ohci-pci
input: HID 046a:0011 as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:046A:0011.0001/input/input11
BTRFS: device fsid 6b7d75bf-3d12-409c-88ed-500ac6b78510 devid 1 transid 396334 /dev/sdb2
BTRFS info (device sdb2): disk space caching is enabled
hid-generic 0003:046A:0011.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 046a:0011] on usb-0000:00:12.0-1/input0
tsc: Refined TSC clocksource calibration: 3210.826 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e483d1f2ca, max_idle_ns: 440795239699 ns
logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.1-2/input2
input: Logitech T400 as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.2/0003:046D:C52B.0004/0003:046D:4026.0005/input/input12
logitech-hidpp-device 0003:046D:4026.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech T400] on usb-0000:00:12.1-2:1
random: nonblocking pool is initialized
clocksource: Switched to clocksource tsc
BTRFS: device fsid 24cee7e4-9093-4f86-aa73-d8a59d7f3c6c devid 1 transid 16525 /dev/sda3
BTRFS info (device sda3): disk space caching is enabled
BTRFS: has skinny extents
BTRFS: detected SSD devices, enabling SSD mode
ATL1E 0000:02:00.0: swiotlb buffer is full (sz: 529461 bytes)
swiotlb: coherent allocation failed for device 0000:02:00.0 size=529461
CPU: 1 PID: 201 Comm: ifconfig Not tainted 4.3.0-rc1-00131-ga7d5c1897198-dirty #119
Hardware name: System manufacturer System Product Name/M4A78T-E, BIOS 3503 04/13/2011
0000000000081434 ffffffff81428dd3 0000000000000000 ffffffff8146e31b
ffffffff00000008 ffff880216bca000 ffff880216bca740 ffff880216b46800
0000000000081435 ffffffff820163c0 0000000000000000 ffffffff817dd982
Call Trace:
[<ffffffff81428dd3>] ? dump_stack+0x40/0x6d
[<ffffffff8146e31b>] ? swiotlb_alloc_coherent+0x17b/0x1a0
[<ffffffff817dd982>] ? atl1e_open+0x362/0x540
[<ffffffff817dd620>] ? atl1e_resume+0x120/0x120
[<ffffffff8199c5e0>] ? eth_change_mtu+0x20/0x20
[<ffffffff81970dde>] ? __dev_open+0x9e/0x1c0
[<ffffffff81979df7>] ? __dev_change_flags+0x2f7/0x440
[<ffffffff8197a0a0>] ? dev_change_flags+0x20/0x180
[<ffffffff81a22f63>] ? devinet_ioctl+0x683/0x7e0
[<ffffffff8194f40a>] ? sock_ioctl+0x16a/0x200
[<ffffffff811db28a>] ? SyS_ioctl+0x2ca/0x500
[<ffffffff8109a847>] ? __do_page_fault+0x147/0x420
[<ffffffff810a80d7>] ? entry_SYSCALL_64_fastpath+0x12/0x66
ATL1E 0000:02:00.0 eth0: pci_alloc_consistent failed, size = D529461
BTRFS info (device sdc3): disk space caching is enabled
microcode: CPU0: new patch_level=0x010000db
microcode: CPU1: new patch_level=0x010000db
microcode: CPU2: new patch_level=0x010000db
microcode: CPU3: new patch_level=0x010000db
Adding 4095996k swap on /dev/sdb1. Priority:-1 extents:1 across:4095996k
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] RS780 Host Bridge
Subsystem: Advanced Micro Devices, Inc. [AMD] RS780 Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [c4] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=12 MastHost- DefDir- DUL-
Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn+ LSEn- ExtCTL- 64b-
Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 3.00
Link Frequency 0: [b]
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [54] HyperTransport: UnitID Clumping
Capabilities: [40] HyperTransport: Retry Mode
Capabilities: [9c] HyperTransport: #1a
Capabilities: [f8] HyperTransport: #1c

00:01.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (int gfx) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fbd00000-fbefffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (int gfx)

00:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI bridge (PCIE port 2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbf00000-fbffffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag+ RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #6, PowerLimit 25.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
RootCap: CRSVisible+
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI bridge (PCIE port 2)
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [110 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-

00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (prog-if 01 [AHCI 1.0])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at c000 [size=8]
Region 1: I/O ports at b000 [size=4]
Region 2: I/O ports at a000 [size=8]
Region 3: I/O ports at 9000 [size=4]
Region 4: I/O ports at 8000 [size=16]
Region 5: Memory at fbcffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [70] SATA HBA v1.0 InCfgSpace
Kernel driver in use: ahci

00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fbcfd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci

00:12.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fbcfe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci

00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fbcff800 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci-pci

00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fbcfb000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci

00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fbcfc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci

00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at fbcff400 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci-pci

00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 3a)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+

00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller (prog-if 8a [Master SecP PriP])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 0
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at ff00 [size=16]
Capabilities: [70] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000

00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA)
Subsystem: ASUSTeK Computer Inc. SBx00 Azalia (Intel HDA)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fbcf4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: snd_hda_intel

00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (prog-if 01 [Subtractive decode])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: fff00000-000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fbcfa000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci

00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn+ LSEn+ ExtCTL- 64b-
Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Revision ID: 3.00
Link Frequency: [b]
Link Error: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-

00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: amd64_edac

00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
Kernel driver in use: k10temp

00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

01:05.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RS780D [Radeon HD 3300] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. RS780D [Radeon HD 3300]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at d000 [size=256]
Region 2: Memory at fbee0000 (32-bit, non-prefetchable) [size=64K]
Region 5: Memory at fbd00000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: radeon

01:05.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] RS780 HDMI Audio [Radeon (HD) 3000 Series]
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RS780 HDMI Audio [Radeon (HD) 3000 Series]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at fbefc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: snd_hda_intel

02:00.0 Ethernet controller: Qualcomm Atheros AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0)
Subsystem: ASUSTeK Computer Inc. AR8121/AR8113/AR8114 Gigabit or Fast Ethernet
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at ec00 [size=128]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [58] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [180 v1] Device Serial Number ff-85-cb-a6-00-24-8c-ff
Kernel driver in use: ATL1E

Next message: Laura Abbott: "Re: [RFC][PATCH] Add spurious wakeup quirk for Lynxpoint controllers"
Previous message: Dan Williams: "Re: [PATCH 1/2 v2] airo: fix IW_AUTH_ALG_OPEN_SYSTEM"
In reply to: Markus Trippelsdorf: "Re: ATL1E 0000:02:00.0: swiotlb buffer is full (sz: 529461 bytes)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]