Re: [RESEND v2] mfd: s2mps11: Add manual shutdown method for Odroid XU3

[Lee Jones]

On Mon, 14 Sep 2015, Krzysztof Kozlowski wrote:

> On Odroid XU3 board (with S2MPS11 PMIC) the PWRHOLD bit in CTRL1
> register must be manually set to 0 before initiating power off sequence.
> 
> One of usual power down methods for Exynos based devices looks like:
> 1. PWRHOLD pin of PMIC is connected to PSHOLD of Exynos SoC.
> 2. Exynos holds up this pin during system operation.
> 3. ACOKB pin of PMIC is pulled up to VBATT and optionally to pin in
>    other device.
> 4. When PWRHOLD/PSHOLD goes low, the PMIC will turn off the power if
>    ACOKB goes high.
> 
> On Odroid XU3 family the difference is in (3) - the ACOKB is grounded.
> This means that PMIC must manually set PWRHOLD field to low and then
> wait for signal from Application Processor (the usual change in
> PWRHOLD/PSHOLD pin will actually cut off the power).
> 
> The patch adds respective binding allowing Odroid XU3 device to be
> powered off.
> 
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
> Reported-by: Anand Moon <linux.amoon@xxxxxxxxx>
> Tested-by: Anand Moon <linux.amoon@xxxxxxxxx>
> Reviewed-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
> Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>
> 
> ---
> 
> The rest of patchset was applied by Kukjin Kim:
>  - dt-bindings documentation:
>    https://git.kernel.org/cgit/linux/kernel/git/kgene/linux-samsung.git/commit/?h=v4.3-next/dt-samsung-new-3&id=ff1020841cf0ff868d61d44169e7cc32f73599b8
>  - DTS change:
>    https://git.kernel.org/cgit/linux/kernel/git/kgene/linux-samsung.git/commit/?h=v4.3-next/dt-samsung-new-3&id=5bcbe4ba55bb0ad75c8495ee295bab036735483e
> 
> Changes since v2:
> 1. Just rebase on current next.
> 
> Changes since v1:
> 1. Split bindings documentation to separate patch (suggested by Lee).
> 2. Fix additional empty line (suggested by Lee).
> 3. Add Anand's tested-by, Javier's reviewed-by and Lee's acked-by.
> 
> Patch is losely based on patch in Hardkernel repository and previous
> work of Anand Moon.
> ---
>  drivers/mfd/sec-core.c              | 30 ++++++++++++++++++++++++++++++
>  include/linux/mfd/samsung/core.h    |  2 ++
>  include/linux/mfd/samsung/s2mps11.h |  1 +
>  3 files changed, 33 insertions(+)

Applied, thanks.

> diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
> index d206a3e8fe87..2d1137a7a0ee 100644
> --- a/drivers/mfd/sec-core.c
> +++ b/drivers/mfd/sec-core.c
> @@ -278,6 +278,8 @@ static struct sec_platform_data *sec_pmic_i2c_parse_dt_pdata(
>  	 * not parsed here.
>  	 */
>  
> +	pd->manual_poweroff = of_property_read_bool(dev->of_node,
> +						"samsung,s2mps11-acokb-ground");
>  	return pd;
>  }
>  #else
> @@ -440,6 +442,33 @@ static int sec_pmic_remove(struct i2c_client *i2c)
>  	return 0;
>  }
>  
> +static void sec_pmic_shutdown(struct i2c_client *i2c)
> +{
> +	struct sec_pmic_dev *sec_pmic = i2c_get_clientdata(i2c);
> +	unsigned int reg, mask;
> +
> +	if (!sec_pmic->pdata->manual_poweroff)
> +		return;
> +
> +	switch (sec_pmic->device_type) {
> +	case S2MPS11X:
> +		reg = S2MPS11_REG_CTRL1;
> +		mask = S2MPS11_CTRL1_PWRHOLD_MASK;
> +		break;
> +	default:
> +		/*
> +		 * Currently only one board with S2MPS11 needs this, so just
> +		 * ignore the rest.
> +		 */
> +		dev_warn(sec_pmic->dev,
> +			"Unsupported device %lu for manual power off\n",
> +			sec_pmic->device_type);
> +		return;
> +	}
> +
> +	regmap_update_bits(sec_pmic->regmap_pmic, reg, mask, 0);
> +}
> +
>  #ifdef CONFIG_PM_SLEEP
>  static int sec_pmic_suspend(struct device *dev)
>  {
> @@ -491,6 +520,7 @@ static struct i2c_driver sec_pmic_driver = {
>  	},
>  	.probe = sec_pmic_probe,
>  	.remove = sec_pmic_remove,
> +	.shutdown = sec_pmic_shutdown,
>  	.id_table = sec_pmic_id,
>  };
>  
> diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
> index 75115384f3fc..aa78957e092f 100644
> --- a/include/linux/mfd/samsung/core.h
> +++ b/include/linux/mfd/samsung/core.h
> @@ -132,6 +132,8 @@ struct sec_platform_data {
>  	int				buck2_init;
>  	int				buck3_init;
>  	int				buck4_init;
> +	/* Whether or not manually set PWRHOLD to low during shutdown. */
> +	bool				manual_poweroff;
>  };
>  
>  /**
> diff --git a/include/linux/mfd/samsung/s2mps11.h b/include/linux/mfd/samsung/s2mps11.h
> index 7981a9d77d3f..b288965e8101 100644
> --- a/include/linux/mfd/samsung/s2mps11.h
> +++ b/include/linux/mfd/samsung/s2mps11.h
> @@ -179,6 +179,7 @@ enum s2mps11_regulators {
>  #define S2MPS11_BUCK_N_VOLTAGES (S2MPS11_BUCK_VSEL_MASK + 1)
>  #define S2MPS11_RAMP_DELAY	25000		/* uV/us */
>  
> +#define S2MPS11_CTRL1_PWRHOLD_MASK	BIT(4)
>  
>  #define S2MPS11_BUCK2_RAMP_SHIFT	6
>  #define S2MPS11_BUCK34_RAMP_SHIFT	4

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/