Le 18/09/2015 13:28, Josh Wu a écrit :It's is a fix, according to the dt binding of video interface.
On at91sam9x5ek/at91sam9m10g45ek/sama5d3xek boards, we use the parallelHi Josh,
connection for ov2640. So we must set the hsync/vsync property (1 means
active high).
Otherwise, the connection would be seen as BT.656 or BT.1120.
Signed-off-by: Josh Wu <josh.wu@xxxxxxxxx>
Does this patch apply because of the new enhancement that you had
proposed in "media: atmel-isi: parse the DT parameters for
vsync/hsync/pixclock polarity" or does it apply even before?
Is it a fix that applies to older kernels?
So, should I wait for the enhancements to enter media git tree or can I
take them anyway?
Bye,
---
arch/arm/boot/dts/at91sam9m10g45ek.dts | 2 ++
arch/arm/boot/dts/at91sam9x5ek.dtsi | 2 ++
arch/arm/boot/dts/sama5d3xmb.dtsi | 2 ++
3 files changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index d1ae60a..9d16ef8 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -198,6 +198,8 @@
isi_0: endpoint {
remote-endpoint = <&ov2640_0>;
bus-width = <8>;
+ vsync-active = <1>;
+ hsync-active = <1>;
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
index d237c46..479f200 100644
--- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
@@ -66,6 +66,8 @@
isi_0: endpoint@0 {
remote-endpoint = <&ov2640_0>;
bus-width = <8>;
+ vsync-active = <1>;
+ hsync-active = <1>;
};
};
};
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
index 83bee7a..8901042 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -87,6 +87,8 @@
isi_0: endpoint {
remote-endpoint = <&ov2640_0>;
bus-width = <8>;
+ vsync-active = <1>;
+ hsync-active = <1>;
};
};
};