Re: [PATCH 3/4] ARM: dts: sun8i: Add Allwinner A83T dtsi

From: Chen-Yu Tsai
Date: Tue Sep 22 2015 - 12:15:57 EST

Next message: Matt Roper: "Re: [regression] [git pull] drm for 4.3"
Previous message: David Daney: "Re: [PATCH 3/3] PCI: generic: Add support for Cavium ThunderX PCIe root complexes."
In reply to: Maxime Ripard: "Re: [PATCH 3/4] ARM: dts: sun8i: Add Allwinner A83T dtsi"
Next in thread: Vishnu Patekar: "[PATCH 4/4] ARM: dts: sun8i: Add A83T HomletV2 Board by Allwinner"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Tue, Sep 22, 2015 at 11:54 PM, Maxime Ripard
<maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:
> On Tue, Sep 22, 2015 at 11:38:56PM +0800, Vishnu Patekar wrote:
>> Allwinner A83T is new octa-core cortex-a7 SOC.
>> This adds the basic dtsi, the clocks differs from
>> earlier sun8i SOCs.
>>
>> Signed-off-by: Vishnu Patekar <vishnupatekar0510@xxxxxxxxx>
>> ---
>> arch/arm/boot/dts/sun8i-a83t.dtsi | 243 ++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 243 insertions(+)
>> create mode 100644 arch/arm/boot/dts/sun8i-a83t.dtsi
>>
>> diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
>> new file mode 100644
>> index 0000000..f6ddd9c
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
>> @@ -0,0 +1,243 @@
>> +/*
>> + * Copyright 2015 Vishnu Patekar
>> + *
>> + * Vishnu Patekar <vishnupatekar0510@xxxxxxxxx>
>> + *
>> + * This file is dual-licensed: you can use it either under the terms
>> + * of the GPL or the X11 license, at your option. Note that this dual
>> + * licensing only applies to this file, and not this project as a
>> + * whole.
>> + *
>> + * a) This file is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of the
>> + * License, or (at your option) any later version.
>> + *
>> + * This file is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> + * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> + * conditions:
>> + *
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> +
>> + */
>> +
>> +#include "skeleton.dtsi"
>> +
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +
>> +#include <dt-bindings/pinctrl/sun4i-a10.h>
>> +
>> +/ {
>> + interrupt-parent = <&gic>;
>> +
>> + chosen {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>> + };
>> +
>> + cpus {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + cpu@0 {
>> + compatible = "arm,cortex-a7";
>> + device_type = "cpu";
>> + reg = <0>;
>> + };
>> +
>> + cpu@1 {
>> + compatible = "arm,cortex-a7";
>> + device_type = "cpu";
>> + reg = <1>;
>> + };
>> +
>> + cpu@2 {
>> + compatible = "arm,cortex-a7";
>> + device_type = "cpu";
>> + reg = <2>;
>> + };
>> +
>> + cpu@3 {
>> + compatible = "arm,cortex-a7";
>> + device_type = "cpu";
>> + reg = <3>;
>> + };
>> + cpu@4 {
>> + compatible = "arm,cortex-a7";
>> + device_type = "cpu";
>> + reg = <4>;

These don't look right. See Documentation/devicetree/bindings/arm/cpus.txt
Cluster 1 would be 0x100 ~ 0x103.

>> + };
>> +
>> + cpu@5 {
>> + compatible = "arm,cortex-a7";
>> + device_type = "cpu";
>> + reg = <5>;
>> + };
>> + cpu@6 {
>> + compatible = "arm,cortex-a7";
>> + device_type = "cpu";
>> + reg = <6>;
>> + };
>> +
>> + cpu@7 {
>> + compatible = "arm,cortex-a7";
>> + device_type = "cpu";
>> + reg = <7>;
>> + };
>> + };
>> +
>> + memory {
>> + reg = <0x40000000 0x80000000>;
>> + };
>> +
>> + timer {
>> + compatible = "arm,armv7-timer";
>> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
>> + clock-frequency = <24000000>;
>> + arm,cpu-registers-not-fw-configured;
>> + };
>> +
>> + clocks {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>> +
>> + osc24M: osc24M_clk {
>> + #clock-cells = <0>;
>> + compatible = "fixed-clock";
>> + clock-frequency = <24000000>;
>> + clock-output-names = "osc24M";
>> + };
>> +
>> + osc32k: osc32k_clk {
>> + #clock-cells = <0>;
>> + compatible = "fixed-clock";
>> + clock-frequency = <32768>;
>> + clock-output-names = "osc32k";
>> + };
>> + };
>> +
>> + soc@01c00000 {
>> + compatible = "simple-bus";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>> +
>> + pio: pinctrl@01c20800 {
>> + compatible = "allwinner,sun8i-a83t-pinctrl";
>> + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
>> + /* compatible gets set in SoC specific dtsi file */
>
> Which DTSI?
>
>> + reg = <0x01c20800 0x400>;
>> + /* interrupts get set in SoC specific dtsi file */
>
> Ditto
>
>> + clocks = <&osc24M>;
>> + gpio-controller;
>> + interrupt-controller;
>> + #interrupt-cells = <3>;
>> + #gpio-cells = <3>;
>> +
>> + uart0_pins_a: uart0@0 {
>> + allwinner,pins = "PF2", "PF4";
>> + allwinner,function = "uart0";
>> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> + };

Could you use PB9 & PB10 for uart0 pins, and not the PF ones?

http://linux-sunxi.org/User:Simos/H8HomletProtoV20_A83T shows
they are available on the headers, and I tested them before.

Thanks!
ChenYu

>> +
>> + mmc0_pins_a: mmc0@0 {
>> + allwinner,pins = "PF0", "PF1", "PF2",
>> + "PF3", "PF4", "PF5";
>> + allwinner,function = "mmc0";
>> + allwinner,drive = <SUN4I_PINCTRL_30_MA>;
>> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> + };
>> +
>> + mmc1_pins_a: mmc1@0 {
>> + allwinner,pins = "PG0", "PG1", "PG2",
>> + "PG3", "PG4", "PG5";
>> + allwinner,function = "mmc1";
>> + allwinner,drive = <SUN4I_PINCTRL_30_MA>;
>> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> + };
>> +
>> + mmc2_8bit_pins: mmc2_8bit {
>> + allwinner,pins = "PC5", "PC6", "PC8",
>> + "PC9", "PC10", "PC11",
>> + "PC12", "PC13", "PC14",
>> + "PC15";

Would we also want PC16 (SDC2_RST)?

>> + allwinner,function = "mmc2";
>> + allwinner,drive = <SUN4I_PINCTRL_30_MA>;
>> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> + };
>> +
>> + i2c0_pins_a: i2c0@0 {
>> + allwinner,pins = "PH0", "PH1";
>> + allwinner,function = "i2c0";
>> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> + };
>> +
>> + i2c1_pins_a: i2c1@0 {
>> + allwinner,pins = "PH2", "PH3";
>> + allwinner,function = "i2c1";
>> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> + };
>> +
>> + i2c2_pins_a: i2c2@0 {
>> + allwinner,pins = "PH4", "PH5";
>> + allwinner,function = "i2c2";
>> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> + };
>
> Please order those by alphabetical order.
>
>> + };
>> +
>> + uart0: serial@01c28000 {
>> + compatible = "snps,dw-apb-uart";
>> + reg = <0x01c28000 0x400>;
>> + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
>> + reg-shift = <2>;
>> + reg-io-width = <4>;
>> + clocks = <&osc24M>;
>> + status = "disabled";
>> + };
>> +
>> + gic: interrupt-controller@01c81000 {
>> + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
>> + reg = <0x01c81000 0x1000>,
>> + <0x01c82000 0x1000>,
>> + <0x01c84000 0x2000>,
>> + <0x01c86000 0x2000>;
>> + interrupt-controller;
>> + #interrupt-cells = <3>;
>> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
>> + };
>> +
>> + };
>> +};
>> --
>> 1.9.1
>>
>
> Thanks!
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux, Kernel and Android engineering
> http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Matt Roper: "Re: [regression] [git pull] drm for 4.3"
Previous message: David Daney: "Re: [PATCH 3/3] PCI: generic: Add support for Cavium ThunderX PCIe root complexes."
In reply to: Maxime Ripard: "Re: [PATCH 3/4] ARM: dts: sun8i: Add Allwinner A83T dtsi"
Next in thread: Vishnu Patekar: "[PATCH 4/4] ARM: dts: sun8i: Add A83T HomletV2 Board by Allwinner"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]