Re: [PATCH 3/3] PCI: generic: Add support for Cavium ThunderX PCIe root complexes.
From: Lorenzo Pieralisi
Date: Tue Sep 22 2015 - 12:40:50 EST
On Tue, Sep 22, 2015 at 05:13:45PM +0100, David Daney wrote:
> On 09/22/2015 09:05 AM, Lorenzo Pieralisi wrote:
> > On Thu, Sep 17, 2015 at 11:41:34PM +0100, David Daney wrote:
[...]
> >> Properties of the host controller node:
> >>
> >> -- compatible : Must be "pci-host-cam-generic" or "pci-host-ecam-generic"
> >> - depending on the layout of configuration space (CAM vs
> >> - ECAM respectively).
> >> +- compatible : One of the following with bus:devfn:reg mapped to the
> >> + PCI config space address window in the bit positions shown:
> >> + "pci-host-cam-generic" -- 'CAM' bits 16:8:0
> >> + "pci-host-ecam-generic" -- 'ECAM' bits 20:12:0
> >> + "cavium,pci-host-thunder-pem" -- bits 24:16:0
> >
> > To me that's ECAM left shifted by 4. Is not it just a matter of defining
> > config space base address (ie reg property) differently ?
>
> No.
>
> That's like saying ECAM is just CAM shifted by 4, can't we just specify
> the "reg" differently.
Ok, sorry I was not clear, apologies. I meant to ask if it is something
that can be configured in your platform and apparently it is not,
I worded it wrongly.
> The "reg" property describes the base of the config space access window.
> CAM/ECAM/cavium,pci-host-thunder-pem describe how to generate offsets
> from that base, The offset calculation requires information that is not
> present in the "reg" property, it is enumerated in the various
> "compatible" values listed above.
Agreed, this also forces you to map in more virtual address space for
a given bus, right ? I am also a bit worried about how we can make this
work with ACPI, where MCFG accessors take the bus and devfn shifts for
granted (ie ECAM specs), so I asked.
Thanks,
Lorenzo
>
> David Daney
>
> >
> > Lorenzo
> >
> >>
> >> - device_type : Must be "pci".
> >>
> >> diff --git a/drivers/pci/host/pci-host-generic.c b/drivers/pci/host/pci-host-generic.c
> >> index e364232..e1d8d5b 100644
> >> --- a/drivers/pci/host/pci-host-generic.c
> >> +++ b/drivers/pci/host/pci-host-generic.c
> >> @@ -91,6 +91,32 @@ static struct gen_pci_cfg_bus_ops gen_pci_cfg_ecam_bus_ops = {
> >> }
> >> };
> >>
> >> +static void __iomem *gen_pci_map_cfg_bus_thunder_pem(struct pci_bus *bus,
> >> + unsigned int devfn,
> >> + int where)
> >> +{
> >> + struct gen_pci *pci = bus->sysdata;
> >> + resource_size_t idx = bus->number - pci->cfg.bus_range->start;
> >> +
> >> + /*
> >> + * Thunder PEM is a PCIe RC, but without a root bridge. On
> >> + * the primary bus, ignore accesses for devices other than
> >> + * the first device.
> >> + */
> >> + if (idx == 0 && (devfn & ~7u))
> >> + return NULL;
> >> + return pci->cfg.win[idx] + ((devfn << 16) | where);
> >> +}
> >> +
> >> +static struct gen_pci_cfg_bus_ops gen_pci_cfg_thunder_pem_bus_ops = {
> >> + .bus_shift = 24,
> >> + .ops = {
> >> + .map_bus = gen_pci_map_cfg_bus_thunder_pem,
> >> + .read = pci_generic_config_read,
> >> + .write = pci_generic_config_write,
> >> + }
> >> +};
> >> +
> >> static const struct of_device_id gen_pci_of_match[] = {
> >> { .compatible = "pci-host-cam-generic",
> >> .data = &gen_pci_cfg_cam_bus_ops },
> >> @@ -98,6 +124,9 @@ static const struct of_device_id gen_pci_of_match[] = {
> >> { .compatible = "pci-host-ecam-generic",
> >> .data = &gen_pci_cfg_ecam_bus_ops },
> >>
> >> + { .compatible = "cavium,pci-host-thunder-pem",
> >> + .data = &gen_pci_cfg_thunder_pem_bus_ops },
> >> +
> >> { },
> >> };
> >> MODULE_DEVICE_TABLE(of, gen_pci_of_match);
> >> --
> >> 1.9.1
> >>
> >> --
> >> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> >> the body of a message to majordomo@xxxxxxxxxxxxxxx
> >> More majordomo info at http://vger.kernel.org/majordomo-info.html
> >>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/