Re: [PATCH v4 2/2] iio: mcp4531: Driver for Microchip digital potentiometers

[Peter Rosin]

On 2015-09-22 20:22, Jonathan Cameron wrote:
> On 22 September 2015 16:36:49 BST, Peter Rosin <peda@xxxxxxxxxxxxxx> wrote:

*snip* lots of cosmetics that I'll fix in the next spin...

>> +
>> +static int mcp4531_read_raw(struct iio_dev *indio_dev,
>> +			    struct iio_chan_spec const *chan,
>> +			    int *val, int *val2, long mask)
>> +{
>> +	int err;
>> +
>> +	switch (mask) {
>> +	case IIO_CHAN_INFO_RAW:
>> +		err = mcp4531_get_value(indio_dev, chan->address, val);
>> +		if (err < 0)
>> +			return err;
>> +		return IIO_VAL_INT;
>> +	}
> No scale known? Be nice to relate to real world values.  I gather this may need
>  platform data of some type (can't open data sheet on phone for some reason)

...but I need more input on this.

Yes, it would be nice and yes it requires platform data, as there is
no way to retrieve if the driver is dealing with a 5, 10, 50 or 100 kOhms
pot/rheostat. You would also have to expose both the resistance between
A to W and between W to B, as you have no way to know how it's been
connected (or you'd need more platform data). Ok, for rheostats you
know how it's connected, since A isn't available, but for pots there
are two resistance values controlled with a single value X i.e.
X*scale/max and (max-X)*scale/max (ignoring the 75 Ohm wiper resistance).

But, I'd rather not go there, as I don't need any of it. Is it Ok to not
provide scaling?

Cheers,
Peter

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/