RE: [PATCH v3 2/4] iio: bcm150: Remove i2c_client from private data
From: Tirdea, Irina
Date: Wed Sep 23 2015 - 08:47:37 EST
> -----Original Message-----
> From: Markus Pargmann [mailto:mpa@xxxxxxxxxxxxxx]
> Sent: 21 September, 2015 13:55
> To: Jonathan Cameron
> Cc: Srinivas Pandruvada; Tirdea, Irina; Lars-Peter Clausen; linux-iio@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> kernel@xxxxxxxxxxxxxx; Markus Pargmann
> Subject: [PATCH v3 2/4] iio: bcm150: Remove i2c_client from private data
>
> i2c_client struct is now only used for debugging output. We can use the
> device struct as well so we can remove all struct i2c_client usage.
>
> Signed-off-by: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
> Acked-by: Jonathan Cameron <jic23@xxxxxxxxxx>
Tested-by: Irina Tirdea <irina.tirdea@xxxxxxxxx>
> ---
> drivers/iio/accel/bmc150-accel.c | 116 +++++++++++++++++++--------------------
> 1 file changed, 56 insertions(+), 60 deletions(-)
>
> diff --git a/drivers/iio/accel/bmc150-accel.c b/drivers/iio/accel/bmc150-accel.c
> index a17034fd53fb..425885dc6800 100644
> --- a/drivers/iio/accel/bmc150-accel.c
> +++ b/drivers/iio/accel/bmc150-accel.c
> @@ -186,9 +186,9 @@ enum bmc150_accel_trigger_id {
> };
>
> struct bmc150_accel_data {
> - struct i2c_client *client;
> struct regmap *regmap;
> struct device *dev;
> + int irq;
> struct bmc150_accel_interrupt interrupts[BMC150_ACCEL_INTERRUPTS];
> atomic_t active_intr;
> struct bmc150_accel_trigger triggers[BMC150_ACCEL_TRIGGERS];
> @@ -278,11 +278,11 @@ static int bmc150_accel_set_mode(struct bmc150_accel_data *data,
> lpw_bits = mode << BMC150_ACCEL_PMU_MODE_SHIFT;
> lpw_bits |= (dur_val << BMC150_ACCEL_PMU_BIT_SLEEP_DUR_SHIFT);
>
> - dev_dbg(&data->client->dev, "Set Mode bits %x\n", lpw_bits);
> + dev_dbg(data->dev, "Set Mode bits %x\n", lpw_bits);
>
> ret = regmap_write(data->regmap, BMC150_ACCEL_REG_PMU_LPW, lpw_bits);
> if (ret < 0) {
> - dev_err(&data->client->dev, "Error writing reg_pmu_lpw\n");
> + dev_err(data->dev, "Error writing reg_pmu_lpw\n");
> return ret;
> }
>
> @@ -320,18 +320,18 @@ static int bmc150_accel_update_slope(struct bmc150_accel_data *data)
> ret = regmap_write(data->regmap, BMC150_ACCEL_REG_INT_6,
> data->slope_thres);
> if (ret < 0) {
> - dev_err(&data->client->dev, "Error writing reg_int_6\n");
> + dev_err(data->dev, "Error writing reg_int_6\n");
> return ret;
> }
>
> ret = regmap_update_bits(data->regmap, BMC150_ACCEL_REG_INT_5,
> BMC150_ACCEL_SLOPE_DUR_MASK, data->slope_dur);
> if (ret < 0) {
> - dev_err(&data->client->dev, "Error updating reg_int_5\n");
> + dev_err(data->dev, "Error updating reg_int_5\n");
> return ret;
> }
>
> - dev_dbg(&data->client->dev, "%s: %x %x\n", __func__, data->slope_thres,
> + dev_dbg(data->dev, "%s: %x %x\n", __func__, data->slope_thres,
> data->slope_dur);
>
> return ret;
> @@ -380,17 +380,17 @@ static int bmc150_accel_set_power_state(struct bmc150_accel_data *data, bool on)
> int ret;
>
> if (on) {
> - ret = pm_runtime_get_sync(&data->client->dev);
> + ret = pm_runtime_get_sync(data->dev);
> } else {
> - pm_runtime_mark_last_busy(&data->client->dev);
> - ret = pm_runtime_put_autosuspend(&data->client->dev);
> + pm_runtime_mark_last_busy(data->dev);
> + ret = pm_runtime_put_autosuspend(data->dev);
> }
>
> if (ret < 0) {
> - dev_err(&data->client->dev,
> + dev_err(data->dev,
> "Failed: bmc150_accel_set_power_state for %d\n", on);
> if (on)
> - pm_runtime_put_noidle(&data->client->dev);
> + pm_runtime_put_noidle(data->dev);
>
> return ret;
> }
> @@ -473,7 +473,7 @@ static int bmc150_accel_set_interrupt(struct bmc150_accel_data *data, int i,
> ret = regmap_update_bits(data->regmap, info->map_reg, info->map_bitmask,
> (state ? info->map_bitmask : 0));
> if (ret < 0) {
> - dev_err(&data->client->dev, "Error updating reg_int_map\n");
> + dev_err(data->dev, "Error updating reg_int_map\n");
> goto out_fix_power_state;
> }
>
> @@ -481,7 +481,7 @@ static int bmc150_accel_set_interrupt(struct bmc150_accel_data *data, int i,
> ret = regmap_update_bits(data->regmap, info->en_reg, info->en_bitmask,
> (state ? info->en_bitmask : 0));
> if (ret < 0) {
> - dev_err(&data->client->dev, "Error updating reg_int_en\n");
> + dev_err(data->dev, "Error updating reg_int_en\n");
> goto out_fix_power_state;
> }
>
> @@ -507,7 +507,7 @@ static int bmc150_accel_set_scale(struct bmc150_accel_data *data, int val)
> BMC150_ACCEL_REG_PMU_RANGE,
> data->chip_info->scale_table[i].reg_range);
> if (ret < 0) {
> - dev_err(&data->client->dev,
> + dev_err(data->dev,
> "Error writing pmu_range\n");
> return ret;
> }
> @@ -529,7 +529,7 @@ static int bmc150_accel_get_temp(struct bmc150_accel_data *data, int *val)
>
> ret = regmap_read(data->regmap, BMC150_ACCEL_REG_TEMP, &value);
> if (ret < 0) {
> - dev_err(&data->client->dev, "Error reading reg_temp\n");
> + dev_err(data->dev, "Error reading reg_temp\n");
> mutex_unlock(&data->mutex);
> return ret;
> }
> @@ -558,7 +558,7 @@ static int bmc150_accel_get_axis(struct bmc150_accel_data *data,
> ret = regmap_bulk_read(data->regmap, BMC150_ACCEL_AXIS_TO_REG(axis),
> &raw_val, 2);
> if (ret < 0) {
> - dev_err(&data->client->dev, "Error reading axis %d\n", axis);
> + dev_err(data->dev, "Error reading axis %d\n", axis);
> bmc150_accel_set_power_state(data, false);
> mutex_unlock(&data->mutex);
> return ret;
> @@ -872,7 +872,7 @@ static int __bmc150_accel_fifo_flush(struct iio_dev *indio_dev,
>
> ret = regmap_read(data->regmap, BMC150_ACCEL_REG_FIFO_STATUS, &val);
> if (ret < 0) {
> - dev_err(&data->client->dev, "Error reading reg_fifo_status\n");
> + dev_err(data->dev, "Error reading reg_fifo_status\n");
> return ret;
> }
>
> @@ -1159,7 +1159,7 @@ static int bmc150_accel_trig_try_reen(struct iio_trigger *trig)
> BMC150_ACCEL_INT_MODE_LATCH_RESET);
> mutex_unlock(&data->mutex);
> if (ret < 0) {
> - dev_err(&data->client->dev,
> + dev_err(data->dev,
> "Error writing reg_int_rst_latch\n");
> return ret;
> }
> @@ -1217,7 +1217,7 @@ static int bmc150_accel_handle_roc_event(struct iio_dev *indio_dev)
>
> ret = regmap_read(data->regmap, BMC150_ACCEL_REG_INT_STATUS_2, &val);
> if (ret < 0) {
> - dev_err(&data->client->dev, "Error reading reg_int_status_2\n");
> + dev_err(data->dev, "Error reading reg_int_status_2\n");
> return ret;
> }
>
> @@ -1283,8 +1283,7 @@ static irqreturn_t bmc150_accel_irq_thread_handler(int irq, void *private)
> BMC150_ACCEL_INT_MODE_LATCH_INT |
> BMC150_ACCEL_INT_MODE_LATCH_RESET);
> if (ret)
> - dev_err(&data->client->dev,
> - "Error writing reg_int_rst_latch\n");
> + dev_err(data->dev, "Error writing reg_int_rst_latch\n");
>
> ret = IRQ_HANDLED;
> } else {
> @@ -1323,17 +1322,13 @@ static irqreturn_t bmc150_accel_irq_handler(int irq, void *private)
> return IRQ_NONE;
> }
>
> -static int bmc150_accel_gpio_probe(struct i2c_client *client,
> - struct bmc150_accel_data *data)
> +static int bmc150_accel_gpio_probe(struct bmc150_accel_data *data)
> {
> struct device *dev;
> struct gpio_desc *gpio;
> int ret;
>
> - if (!client)
> - return -EINVAL;
> -
> - dev = &client->dev;
> + dev = data->dev;
>
> /* data ready gpio interrupt pin */
> gpio = devm_gpiod_get_index(dev, BMC150_ACCEL_GPIO_NAME, 0, GPIOD_IN);
> @@ -1386,7 +1381,7 @@ static int bmc150_accel_triggers_setup(struct iio_dev *indio_dev,
> for (i = 0; i < BMC150_ACCEL_TRIGGERS; i++) {
> struct bmc150_accel_trigger *t = &data->triggers[i];
>
> - t->indio_trig = devm_iio_trigger_alloc(&data->client->dev,
> + t->indio_trig = devm_iio_trigger_alloc(data->dev,
> bmc150_accel_triggers[i].name,
> indio_dev->name,
> indio_dev->id);
> @@ -1395,7 +1390,7 @@ static int bmc150_accel_triggers_setup(struct iio_dev *indio_dev,
> break;
> }
>
> - t->indio_trig->dev.parent = &data->client->dev;
> + t->indio_trig->dev.parent = data->dev;
> t->indio_trig->ops = &bmc150_accel_trigger_ops;
> t->intr = bmc150_accel_triggers[i].intr;
> t->data = data;
> @@ -1424,7 +1419,7 @@ static int bmc150_accel_fifo_set_mode(struct bmc150_accel_data *data)
>
> ret = regmap_write(data->regmap, reg, data->fifo_mode);
> if (ret < 0) {
> - dev_err(&data->client->dev, "Error writing reg_fifo_config1\n");
> + dev_err(data->dev, "Error writing reg_fifo_config1\n");
> return ret;
> }
>
> @@ -1434,7 +1429,7 @@ static int bmc150_accel_fifo_set_mode(struct bmc150_accel_data *data)
> ret = regmap_write(data->regmap, BMC150_ACCEL_REG_FIFO_CONFIG0,
> data->watermark);
> if (ret < 0)
> - dev_err(&data->client->dev, "Error writing reg_fifo_config0\n");
> + dev_err(data->dev, "Error writing reg_fifo_config0\n");
>
> return ret;
> }
> @@ -1523,12 +1518,12 @@ static int bmc150_accel_chip_init(struct bmc150_accel_data *data)
>
> ret = regmap_read(data->regmap, BMC150_ACCEL_REG_CHIP_ID, &val);
> if (ret < 0) {
> - dev_err(&data->client->dev,
> + dev_err(data->dev,
> "Error: Reading chip id\n");
> return ret;
> }
>
> - dev_dbg(&data->client->dev, "Chip Id %x\n", val);
> + dev_dbg(data->dev, "Chip Id %x\n", val);
> for (i = 0; i < ARRAY_SIZE(bmc150_accel_chip_info_tbl); i++) {
> if (bmc150_accel_chip_info_tbl[i].chip_id == val) {
> data->chip_info = &bmc150_accel_chip_info_tbl[i];
> @@ -1537,7 +1532,7 @@ static int bmc150_accel_chip_init(struct bmc150_accel_data *data)
> }
>
> if (!data->chip_info) {
> - dev_err(&data->client->dev, "Invalid chip %x\n", val);
> + dev_err(data->dev, "Invalid chip %x\n", val);
> return -ENODEV;
> }
>
> @@ -1554,7 +1549,7 @@ static int bmc150_accel_chip_init(struct bmc150_accel_data *data)
> ret = regmap_write(data->regmap, BMC150_ACCEL_REG_PMU_RANGE,
> BMC150_ACCEL_DEF_RANGE_4G);
> if (ret < 0) {
> - dev_err(&data->client->dev,
> + dev_err(data->dev,
> "Error writing reg_pmu_range\n");
> return ret;
> }
> @@ -1573,7 +1568,7 @@ static int bmc150_accel_chip_init(struct bmc150_accel_data *data)
> BMC150_ACCEL_INT_MODE_LATCH_INT |
> BMC150_ACCEL_INT_MODE_LATCH_RESET);
> if (ret < 0) {
> - dev_err(&data->client->dev,
> + dev_err(data->dev,
> "Error writing reg_int_rst_latch\n");
> return ret;
> }
> @@ -1588,6 +1583,7 @@ static int bmc150_accel_probe(struct i2c_client *client,
> struct iio_dev *indio_dev;
> int ret;
> const char *name = NULL;
> + struct device *dev;
>
> indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
> if (!indio_dev)
> @@ -1595,12 +1591,13 @@ static int bmc150_accel_probe(struct i2c_client *client,
>
> data = iio_priv(indio_dev);
> i2c_set_clientdata(client, indio_dev);
> - data->client = client;
> data->dev = &client->dev;
> + dev = &client->dev;
> + data->irq = client->irq;
>
> data->regmap = devm_regmap_init_i2c(client, &bmc150_i2c_regmap_conf);
> if (IS_ERR(data->regmap)) {
> - dev_err(&client->dev, "Failed to initialize i2c regmap\n");
> + dev_err(dev, "Failed to initialize i2c regmap\n");
> return PTR_ERR(data->regmap);
> }
>
> @@ -1613,7 +1610,7 @@ static int bmc150_accel_probe(struct i2c_client *client,
>
> mutex_init(&data->mutex);
>
> - indio_dev->dev.parent = &client->dev;
> + indio_dev->dev.parent = dev;
> indio_dev->channels = data->chip_info->channels;
> indio_dev->num_channels = data->chip_info->num_channels;
> indio_dev->name = name ? name : data->chip_info->name;
> @@ -1625,16 +1622,16 @@ static int bmc150_accel_probe(struct i2c_client *client,
> bmc150_accel_trigger_handler,
> &bmc150_accel_buffer_ops);
> if (ret < 0) {
> - dev_err(&client->dev, "Failed: iio triggered buffer setup\n");
> + dev_err(data->dev, "Failed: iio triggered buffer setup\n");
> return ret;
> }
>
> - if (client->irq < 0)
> - client->irq = bmc150_accel_gpio_probe(client, data);
> + if (data->irq <= 0)
> + data->irq = bmc150_accel_gpio_probe(data);
>
> - if (client->irq > 0) {
> + if (data->irq > 0) {
> ret = devm_request_threaded_irq(
> - &client->dev, client->irq,
> + data->dev, data->irq,
> bmc150_accel_irq_handler,
> bmc150_accel_irq_thread_handler,
> IRQF_TRIGGER_RISING,
> @@ -1652,7 +1649,7 @@ static int bmc150_accel_probe(struct i2c_client *client,
> ret = regmap_write(data->regmap, BMC150_ACCEL_REG_INT_RST_LATCH,
> BMC150_ACCEL_INT_MODE_LATCH_RESET);
> if (ret < 0) {
> - dev_err(&data->client->dev, "Error writing reg_int_rst_latch\n");
> + dev_err(data->dev, "Error writing reg_int_rst_latch\n");
> goto err_buffer_cleanup;
> }
>
> @@ -1673,18 +1670,17 @@ static int bmc150_accel_probe(struct i2c_client *client,
>
> ret = iio_device_register(indio_dev);
> if (ret < 0) {
> - dev_err(&client->dev, "Unable to register iio device\n");
> + dev_err(data->dev, "Unable to register iio device\n");
> goto err_trigger_unregister;
> }
>
> - ret = pm_runtime_set_active(&client->dev);
> + ret = pm_runtime_set_active(dev);
> if (ret)
> goto err_iio_unregister;
>
> - pm_runtime_enable(&client->dev);
> - pm_runtime_set_autosuspend_delay(&client->dev,
> - BMC150_AUTO_SUSPEND_DELAY_MS);
> - pm_runtime_use_autosuspend(&client->dev);
> + pm_runtime_enable(dev);
> + pm_runtime_set_autosuspend_delay(dev, BMC150_AUTO_SUSPEND_DELAY_MS);
> + pm_runtime_use_autosuspend(dev);
>
> return 0;
>
> @@ -1703,9 +1699,9 @@ static int bmc150_accel_remove(struct i2c_client *client)
> struct iio_dev *indio_dev = i2c_get_clientdata(client);
> struct bmc150_accel_data *data = iio_priv(indio_dev);
>
> - pm_runtime_disable(&client->dev);
> - pm_runtime_set_suspended(&client->dev);
> - pm_runtime_put_noidle(&client->dev);
> + pm_runtime_disable(data->dev);
> + pm_runtime_set_suspended(data->dev);
> + pm_runtime_put_noidle(data->dev);
>
> iio_device_unregister(indio_dev);
>
> @@ -1723,7 +1719,7 @@ static int bmc150_accel_remove(struct i2c_client *client)
> #ifdef CONFIG_PM_SLEEP
> static int bmc150_accel_suspend(struct device *dev)
> {
> - struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
> + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> struct bmc150_accel_data *data = iio_priv(indio_dev);
>
> mutex_lock(&data->mutex);
> @@ -1735,7 +1731,7 @@ static int bmc150_accel_suspend(struct device *dev)
>
> static int bmc150_accel_resume(struct device *dev)
> {
> - struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
> + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> struct bmc150_accel_data *data = iio_priv(indio_dev);
>
> mutex_lock(&data->mutex);
> @@ -1751,11 +1747,11 @@ static int bmc150_accel_resume(struct device *dev)
> #ifdef CONFIG_PM
> static int bmc150_accel_runtime_suspend(struct device *dev)
> {
> - struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
> + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> struct bmc150_accel_data *data = iio_priv(indio_dev);
> int ret;
>
> - dev_dbg(&data->client->dev, __func__);
> + dev_dbg(data->dev, __func__);
> ret = bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_SUSPEND, 0);
> if (ret < 0)
> return -EAGAIN;
> @@ -1765,12 +1761,12 @@ static int bmc150_accel_runtime_suspend(struct device *dev)
>
> static int bmc150_accel_runtime_resume(struct device *dev)
> {
> - struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
> + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> struct bmc150_accel_data *data = iio_priv(indio_dev);
> int ret;
> int sleep_val;
>
> - dev_dbg(&data->client->dev, __func__);
> + dev_dbg(data->dev, __func__);
>
> ret = bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_NORMAL, 0);
> if (ret < 0)
> --
> 2.5.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/