[RFC PATCH 1/2] usb: doc: Add bindings for ULPI platform driver

[Subbaraya Sundeep Bhatta]

This patch adds binding doc info for generic ULPI PHYs
platform driver.

Signed-off-by: Subbaraya Sundeep Bhatta <sbhatta@xxxxxxxxxx>
---
 .../devicetree/bindings/usb/ulpi-platform-phy.txt  |   34 ++++++++++++++++++++
 1 files changed, 34 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/ulpi-platform-phy.txt

diff --git a/Documentation/devicetree/bindings/usb/ulpi-platform-phy.txt b/Documentation/devicetree/bindings/usb/ulpi-platform-phy.txt
new file mode 100644
index 0000000..7b8cbb4
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ulpi-platform-phy.txt
@@ -0,0 +1,34 @@
+Platform driver for generic ULPI PHYs
+
+Required properties:
+- compatible		: Should be "ulpi-phy"
+- reg			: Physical base address and size of the USB
+			  controller registers map to which this PHY
+			  is connected.
+- view-port		: Should contain viewport register offset of the
+			  USB controller to which this PHY is connected
+Optional properties:
+- drv-vbus		: required if turning VBUS on/off has to be driven
+			  by writing to PHY. This feature depends on board
+			  design.
+
+Example:
+Below example shows the PHY binding for Chipidea USB controller which has
+ulpi viewport register at 0x0170
+
+		usb_phy0: phy0 {
+                	compatible = "ulpi-phy";
+                	reg = <0xe0002000 0x1000>;
+                	view-port = <0x0170>;
+                	drv-vbus;
+        	};
+
+		usb0: usb@e0002000 {
+                        compatible = "chipidea,usb2";
+                        interrupt-parent = <&intc>;
+                        interrupts = <0 21 4>;
+                        reg = <0xe0002000 0x1000>;
+                        phy_type = "ulpi";
+			dr_mode = "host";
+			usb-phy = <&usb_phy0>;
+                };
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/