Re: [PATCH] iio: gyro: ssp_gyro_sensor: Use devm_iio_device_register

From: Vaishali Thakkar
Date: Sun Sep 27 2015 - 00:17:01 EST


On Mon, Sep 21, 2015 at 4:48 PM, Karol Wrona <k.wrona@xxxxxxxxxxx> wrote:
> On 09/21/2015 11:53 AM, Jonathan Cameron wrote:
>>
>>
>> On 21 September 2015 09:18:39 BST, Karol Wrona <k.wrona@xxxxxxxxxxx> wrote:
>>> On 09/20/2015 09:18 PM, Jonathan Cameron wrote:
>>>> On 14/09/15 17:08, Vaishali Thakkar wrote:
>>>>> Use resourced managed function devm_iio_device_register to
>>>>> make error path simpler. To be compatible with the change,
>>>>> the remove function is removed as it is now redundant.
>>>>>
>>>>> Signed-off-by: Vaishali Thakkar <vthakkar1994@xxxxxxxxx>
>>>> This patch is reasonable, but makes me wonder if there is an issue
>>>> in the remove path for this driver. It relies on the ssp_sensors
>>> common
>>>> module. That in ssp_spi.c uses the fact ssp_register_consumer
>>>> has saved the struct iio_dev into a local array in the core driver.
>>>> I think this means that a remove of this function will leave a
>>> possible
>>>> null pointer de reference.
>>> You are right. In this case we need something like
>>> ssp_deregister_consumer(...) in ssp_dev.c. So I think that "remove
>>> func"
>>> should stay. Of course we can switch to devm iio register.
>> Not if you want to remove the userspace interface before doing you new function call. Doing so gives a nasty race.
> So better leave it out:
> iio_device_unregister(indio_dev) will disable the buffers and through
> ops disables the sensor and than remove iio dev ptr from the internal table.
>

Sorry for the late reply. Yes, I guess I missed the point that
'ssp_register_consumer' is
used in probe function. And I believe that devm_iio_register is useful
only when we
can convert all other functions to their devm counterparts and remove
function will go
away.

But then why don't we need ssp_deregister_consumer here in the remove function?
Is it automatically handled by iio_device_unregister? I guess Karol
tried to explain
the same thing but I am still confused. Same case applies for
ssp_sensors/ssp_dev.c.

>>>
>>> Also the same can (rather should) be done for accelerometer sensor
>>> (ssp_accel_sensor.c).
>>>
>>> Vaishali, if you want please feel free and send patch.
>>>
>>>>
>>>> Now I suspect that case doesn't actually occur because the relevant
>>>> device elements are disabled whenever this module is removed. Having
>>>> said that we might expect an ssp_unregister_consumer function that
>>>> sets the relevant pointer back to null on removal so as to avoid
>>>> any possible race conditions around driver removal / reprobing.
>>>> A spot of defensive programming rather than necessarily a bug to be
>>>> fixed!
>>>>
>>>> One little process thing. This driver was written by Karol so patches
>>>> should probably always cc Karol as well as the more general
>>>> maintainer / reviewers for IIO. Added cc.
>>>>
>>>> Jonathan
>>>>> ---
>>>>> drivers/iio/gyro/ssp_gyro_sensor.c | 12 +-----------
>>>>> 1 file changed, 1 insertion(+), 11 deletions(-)
>>>>>
>>>>> diff --git a/drivers/iio/gyro/ssp_gyro_sensor.c
>>> b/drivers/iio/gyro/ssp_gyro_sensor.c
>>>>> index 0a8afdd..ac88de7 100644
>>>>> --- a/drivers/iio/gyro/ssp_gyro_sensor.c
>>>>> +++ b/drivers/iio/gyro/ssp_gyro_sensor.c
>>>>> @@ -134,7 +134,7 @@ static int ssp_gyro_probe(struct platform_device
>>> *pdev)
>>>>>
>>>>> platform_set_drvdata(pdev, indio_dev);
>>>>>
>>>>> - ret = iio_device_register(indio_dev);
>>>>> + ret = devm_iio_device_register(&pdev->dev, indio_dev);
>>>>> if (ret < 0)
>>>>> return ret;
>>>>>
>>>>> @@ -144,21 +144,11 @@ static int ssp_gyro_probe(struct
>>> platform_device *pdev)
>>>>> return 0;
>>>>> }
>>>>>
>>>>> -static int ssp_gyro_remove(struct platform_device *pdev)
>>>>> -{
>>>>> - struct iio_dev *indio_dev = platform_get_drvdata(pdev);
>>>>> -
>>>>> - iio_device_unregister(indio_dev);
>>>>> -
>>>>> - return 0;
>>>>> -}
>>>>> -
>>>>> static struct platform_driver ssp_gyro_driver = {
>>>>> .driver = {
>>>>> .name = SSP_GYROSCOPE_NAME,
>>>>> },
>>>>> .probe = ssp_gyro_probe,
>>>>> - .remove = ssp_gyro_remove,
>>>>> };
>>>>>
>>>>> module_platform_driver(ssp_gyro_driver);
>>>>>
>>>>
>>>> --
>>>> To unsubscribe from this list: send the line "unsubscribe linux-iio"
>>> in
>>>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>>
>>
>



--
Vaishali
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/