Re: [PATCH v2] mtd: nand: pxa3xx-nand: prevent DFI bus lockup on removal

From: Brian Norris
Date: Sun Sep 27 2015 - 20:05:55 EST

On Sat, Sep 26, 2015 at 10:19:07PM +0200, Robert Jarzmik wrote:
> Robert Jarzmik <robert.jarzmik@xxxxxxx> writes:
> > After the conversion of pxa architecture to common clock framework, the
> > NAND clock can be disabled on driver exit.
> >
> > In this case, it happens that if the driver used the NAND and set the
> > DFI arbitration bit, the next access to a static memory controller area,
> > such as an ethernet card, will stall the system bus, and the core will
> > be stalled forever.
> >
> > This is especially true on pxa31x SoCs, where the NDCR was augmented
> > with a new bit to prevent this lockups by giving full ownership of the
> > DFI arbiter to the SMC, in change SCr#6.
> >
> > Fix this by clearing the DFI arbritration bit in driver exit. This
> > effectively prevents a lockup on zylonite when removing pxa3xx-nand
> > module, and using ethernet afterwards.
> >
> > Signed-off-by: Robert Jarzmik <robert.jarzmik@xxxxxxx>
> Hi Brian,
> Are you happy with this patch, and if so could you queue it please ?

It looks OK to me, but it doesn't apply to the latest l2-mtd.git. Am I
missing something? I didn't try too hard to work out the conflict

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at
Please read the FAQ at