[PATCH] thermal: avoid division by zero in power allocator

[Andrea Arcangeli]

During boot I get a div by zero Oops regression starting in v4.3-rc3.

Reviewed-by: Javi Merino <javi.merino@xxxxxxx>
Signed-off-by: Andrea Arcangeli <aarcange@xxxxxxxxxx>
---
 drivers/thermal/power_allocator.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/thermal/power_allocator.c b/drivers/thermal/power_allocator.c
index 7ff9627..e570ff0 100644
--- a/drivers/thermal/power_allocator.c
+++ b/drivers/thermal/power_allocator.c
@@ -144,6 +144,16 @@ static void estimate_pid_constants(struct thermal_zone_device *tz,
 		switch_on_temp = 0;
 
 	temperature_threshold = control_temp - switch_on_temp;
+	/*
+	 * estimate_pid_constants() tries to find appropriate default
+	 * values for thermal zones that don't provide them. If a
+	 * system integrator has configured a thermal zone with two
+	 * passive trip points at the same temperature, that person
+	 * hasn't put any effort to set up the thermal zone properly
+	 * so just give up.
+	 */
+	if (!temperature_threshold)
+		return;
 
 	if (!tz->tzp->k_po || force)
 		tz->tzp->k_po = int_to_frac(sustainable_power) /
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/