Re: [PATCH v5 0/2] Add Cygnus PCIe Serdes/PHY support

From: Kishon Vijay Abraham I
Date: Tue Sep 29 2015 - 09:24:50 EST


Hi,

On Monday 28 September 2015 09:33 PM, Ray Jui wrote:
> Hi Kishon,
>
> Is there any more change that you want me to make with this patch series?

Nope. The patch looks good, I'll be merging it soonish.

Thanks
Kishon

>
> Thanks,
>
> Ray
>
> On 9/21/2015 10:17 AM, Ray Jui wrote:
>> This patch series adds support for the Cygnus PCIe PHY
>>
>> This patch series is based on Linux v4.3-rc1 and is avaliable in:
>> https://github.com/Broadcom/cygnus-linux/tree/cygnus-pcie-phy-v5
>>
>> Changes from v4:
>> - Add comment to explain the required 50 ms wait after PCIe AFE is brought
>> up
>> - Change some of 'dev_info' print to 'dev_dbg'
>>
>> Changes from v3:
>> - Modify the driver to use child node to represent each PCIe PHY
>> - Update device tree binding document and examples accordingly
>> - Add owner filed in phy ops
>>
>> Changes from v2:
>> - Dropped MDC/MDIO bus driver since it's not needed to enable/disable the
>> analog-front-end of the PCIe Serdes on Cygnus
>> - Optimized delay waiting for PCIe analog-front-end to be fully enabled
>> - Reduce the #phy-cell to 1 since now the MDIO PHY ID is not required
>>
>> Changes from v1:
>> - Move the MDC/MDIO bus driver from drivers/phy/* to drivers/bus/*
>> - Make the PCIe PHY device node child node of the MDIO bus
>> - Change the PCIe PHY driver to tristate so it can be compiled as a module
>> - Other minor changes
>>
>> Ray Jui (2):
>> dt-bindings: Add Cygnus PCIe PHY binding doc
>> phy: cygnus: pcie: Add Cygnus PCIe PHY support
>>
>> .../bindings/phy/brcm,cygnus-pcie-phy.txt | 47 +++++
>> drivers/phy/Kconfig | 9 +
>> drivers/phy/Makefile | 1 +
>> drivers/phy/phy-bcm-cygnus-pcie.c | 213 +++++++++++++++++++++
>> 4 files changed, 270 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt
>> create mode 100644 drivers/phy/phy-bcm-cygnus-pcie.c
>>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/