[PATCH 3.16.y-ckt 012/133] staging: comedi: usbduxsigma: don't clobber ai_timer in command test

[Luis Henriques]

3.16.7-ckt18 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ian Abbott <abbotti@xxxxxxxxx>

commit 423b24c37dd5794a674c74b0ed56392003a69891 upstream.

`devpriv->ai_timer` is used while an asynchronous command is running on
the AI subdevice.  It also gets modified by the subdevice's `cmdtest`
handler for checking new asynchronous commands
(`usbduxsigma_ai_cmdtest()`), which is not correct as it's allowed to
check new commands while an old command is still running.  Fix it by
moving the code which sets up `devpriv->ai_timer` and
`devpriv->ai_interval` into the subdevice's `cmd` handler,
`usbduxsigma_ai_cmd()`.

** This backported patch also moves the code that sets up
`devpriv->ai_sample_count` from `usbduxsigma_ai_cmdtest()` to
`usbduxsigma_ai_cmd()` for the same reason as above. (This was not
needed in the upstream commit.) **

Note that the removed code in `usbduxsigma_ai_cmdtest()` checked that
`devpriv->ai_timer` did not end up less than than 1, but that could not
happen because `cmd->scan_begin_arg` had already been checked to be at
least the minimum required value (at least when `cmd->scan_begin_src ==
TRIG_TIMER`, which had also been checked to be the case).

Fixes: b986be8527c7 ("staging: comedi: usbduxsigma: tidy up analog input command support)
Signed-off-by: Ian Abbott <abbotti@xxxxxxxxx>
Signed-off-by: Luis Henriques <luis.henriques@xxxxxxxxxxxxx>
---
 drivers/staging/comedi/drivers/usbduxsigma.c | 53 +++++++++++++---------------
 1 file changed, 24 insertions(+), 29 deletions(-)

diff --git a/drivers/staging/comedi/drivers/usbduxsigma.c b/drivers/staging/comedi/drivers/usbduxsigma.c
index ccc3ef7ba55c..e2c0c54e0910 100644
--- a/drivers/staging/comedi/drivers/usbduxsigma.c
+++ b/drivers/staging/comedi/drivers/usbduxsigma.c
@@ -572,35 +572,6 @@ static int usbduxsigma_ai_cmdtest(struct comedi_device *dev,
 	if (err)
 		return 3;
 
-	/* Step 4: fix up any arguments */
-
-	if (high_speed) {
-		/*
-		 * every 2 channels get a time window of 125us. Thus, if we
-		 * sample all 16 channels we need 1ms. If we sample only one
-		 * channel we need only 125us
-		 */
-		devpriv->ai_interval = interval;
-		devpriv->ai_timer = cmd->scan_begin_arg / (125000 * interval);
-	} else {
-		/* interval always 1ms */
-		devpriv->ai_interval = 1;
-		devpriv->ai_timer = cmd->scan_begin_arg / 1000000;
-	}
-	if (devpriv->ai_timer < 1)
-		err |= -EINVAL;
-
-	if (cmd->stop_src == TRIG_COUNT) {
-		/* data arrives as one packet */
-		devpriv->ai_sample_count = cmd->stop_arg;
-	} else {
-		/* continuous acquisition */
-		devpriv->ai_sample_count = 0;
-	}
-
-	if (err)
-		return 4;
-
 	return 0;
 }
 
@@ -700,6 +671,30 @@ static int usbduxsigma_ai_cmd(struct comedi_device *dev,
 
 	/* set current channel of the running acquisition to zero */
 	s->async->cur_chan = 0;
+
+	if (devpriv->high_speed) {
+		/*
+		 * every 2 channels get a time window of 125us. Thus, if we
+		 * sample all 16 channels we need 1ms. If we sample only one
+		 * channel we need only 125us
+		 */
+		unsigned int interval = usbduxsigma_chans_to_interval(len);
+
+		devpriv->ai_interval = interval;
+		devpriv->ai_timer = cmd->scan_begin_arg / (125000 * interval);
+	} else {
+		/* interval always 1ms */
+		devpriv->ai_interval = 1;
+		devpriv->ai_timer = cmd->scan_begin_arg / 1000000;
+	}
+	if (cmd->stop_src == TRIG_COUNT) {
+		/* data arrives as one packet */
+		devpriv->ai_sample_count = cmd->stop_arg;
+	} else {
+		/* continuous acquisition */
+		devpriv->ai_sample_count = 0;
+	}
+
 	for (i = 0; i < len; i++) {
 		unsigned int chan  = CR_CHAN(cmd->chanlist[i]);
 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/