[PATCH 4.2 26/30] net: dsa: bcm_sf2: Do not override speed settings

From: Greg Kroah-Hartman
Date: Thu Oct 01 2015 - 05:25:58 EST


4.2-stable review patch. If anyone has any objections, please let me know.

------------------

From: Florian Fainelli <f.fainelli@xxxxxxxxx>

[ Upstream d2eac98f7d1b950b762a7eca05a9ce0ea1d878d2 in net-next tree,
will be pushed to Linus very soon. ]

The SF2 driver currently overrides speed settings for its port
configured using a fixed PHY, this is both unnecessary and incorrect,
because we keep feedback to the hardware parameters that we read from
the PHY device, which in the case of a fixed PHY cannot possibly change
speed.

This is a required change to allow the fixed PHY code to allow
registering a PHY with a link configured as DOWN by default and avoid
some sort of circular dependency where we require the link_update
callback to run to program the hardware, and we then utilize the fixed
PHY parameters to program the hardware with the same settings.

Fixes: 246d7f773c13 ("net: dsa: add Broadcom SF2 switch driver")
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/dsa/bcm_sf2.c | 18 +-----------------
1 file changed, 1 insertion(+), 17 deletions(-)

--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -905,15 +905,11 @@ static void bcm_sf2_sw_fixed_link_update
struct fixed_phy_status *status)
{
struct bcm_sf2_priv *priv = ds_to_priv(ds);
- u32 duplex, pause, speed;
+ u32 duplex, pause;
u32 reg;

duplex = core_readl(priv, CORE_DUPSTS);
pause = core_readl(priv, CORE_PAUSESTS);
- speed = core_readl(priv, CORE_SPDSTS);
-
- speed >>= (port * SPDSTS_SHIFT);
- speed &= SPDSTS_MASK;

status->link = 0;

@@ -948,18 +944,6 @@ static void bcm_sf2_sw_fixed_link_update
reg &= ~LINK_STS;
core_writel(priv, reg, CORE_STS_OVERRIDE_GMIIP_PORT(port));

- switch (speed) {
- case SPDSTS_10:
- status->speed = SPEED_10;
- break;
- case SPDSTS_100:
- status->speed = SPEED_100;
- break;
- case SPDSTS_1000:
- status->speed = SPEED_1000;
- break;
- }
-
if ((pause & (1 << port)) &&
(pause & (1 << (port + PAUSESTS_TX_PAUSE_SHIFT)))) {
status->asym_pause = 1;


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/