Re: [PATCH 4.2 00/30] 4.2.3-stable review
From: Sedat Dilek
Date: Thu Oct 01 2015 - 06:14:58 EST
Hi,
Linux v4.2.3-rc1 boots fine and has the ppp-fix I need here.
Guillaume Nault (1):
ppp: fix lockdep splat in ppp_dev_uninit()
Thanks to all involved people.
Regards,
- Sedat -
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.2.3-rc1-1-iniza-small (sedat.dilek@xxxxxxxxx@fambox) (gcc version 4.9.2 (Ubuntu 4.9.2-0ubuntu1~12.04) ) #1 SMP Thu Oct 1 12:04:38 CEST 2015
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.2.3-rc1-1-iniza-small root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Disabled fast string operations
[ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d9c9efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d9c9f000-0x00000000dae7efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dae7f000-0x00000000daf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0DB000000 mask FFF000000 uncachable
[ 0.000000] 5 base 100000000 mask FE0000000 write-back
[ 0.000000] 6 base 11FE00000 mask FFFE00000 uncachable
[ 0.000000] 7 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f00e0-0x000f00ef] mapped at [ffff8800000f00e0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02cce000, 0x02ccefff] PGTABLE
[ 0.000000] BRK [0x02ccf000, 0x02ccffff] PGTABLE
[ 0.000000] BRK [0x02cd0000, 0x02cd0fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11fc00000-0x11fdfffff]
[ 0.000000] [mem 0x11fc00000-0x11fdfffff] page 2M
[ 0.000000] BRK [0x02cd1000, 0x02cd1fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11fbfffff]
[ 0.000000] [mem 0x100000000-0x11fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0xc0000000-0xd9c9efff]
[ 0.000000] [mem 0xc0000000-0xd9bfffff] page 2M
[ 0.000000] [mem 0xd9c00000-0xd9c9efff] page 4k
[ 0.000000] BRK [0x02cd2000, 0x02cd2fff] PGTABLE
[ 0.000000] BRK [0x02cd3000, 0x02cd3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xdafff000-0xdaffffff]
[ 0.000000] [mem 0xdafff000-0xdaffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x40200000-0xbfffffff]
[ 0.000000] [mem 0x40200000-0xbfffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x378f4000-0x37c71fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0100 000024 (v02 SECCSD)
[ 0.000000] ACPI: XSDT 0x00000000DAFFE170 00008C (v01 SECCSD LH43STAR 00000002 PTEC 00000002)
[ 0.000000] ACPI: FACP 0x00000000DAFEF000 00010C (v05 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: DSDT 0x00000000DAFF2000 0083AC (v02 SECCSD SNB-CPT 00000000 INTL 20061109)
[ 0.000000] ACPI: FACS 0x00000000DAF47000 000040
[ 0.000000] ACPI: SLIC 0x00000000DAFFD000 000176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001)
[ 0.000000] ACPI: SSDT 0x00000000DAFFB000 001068 (v01 SECCSD PtidDevc 00001000 INTL 20061109)
[ 0.000000] ACPI: ASF! 0x00000000DAFF1000 0000A5 (v32 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: HPET 0x00000000DAFEE000 000038 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: APIC 0x00000000DAFED000 000098 (v03 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: MCFG 0x00000000DAFEC000 00003C (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: SSDT 0x00000000DAFEB000 000804 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000DAFEA000 000996 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 0x00000000DAFE9000 00003E (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: UEFI 0x00000000DAFE8000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: UEFI 0x00000000DAFE7000 00026A (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: SSDT 0x00000000DAFE6000 0000D0 (v01 Iffs IffsAsl 00003000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x11fdf8000-0x11fdfcfff]
[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b400000-ffff88011f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000011fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x000000003fffffff]
[ 0.000000] node 0: [mem 0x0000000040200000-0x00000000d9c9efff]
[ 0.000000] node 0: [mem 0x00000000dafff000-0x00000000daffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000011fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fdfffff]
[ 0.000000] On node 0 totalpages: 1021500
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 156 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13859 pages used for memmap
[ 0.000000] DMA32 zone: 886944 pages, LIFO batch:31
[ 0.000000] Normal zone: 2040 pages used for memmap
[ 0.000000] Normal zone: 130560 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xdba00000-0xdf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9c9f000-0xdae7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdae7f000-0xdaf9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 34 pages/cpu @ffff88011fa00000 s100808 r8192 d30264 u262144
[ 0.000000] pcpu-alloc: s100808 r8192 d30264 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1005381
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.3-rc1-1-iniza-small root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3918744K/4086000K available (8071K kernel code, 1369K rwdata, 3460K rodata, 1432K init, 14368K bss, 167256K reserved, 0K cma-reserved)
[ 0.000000] Running RCU self tests
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU lockdep checking is enabled.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:16640 nr_irqs:488 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536
[ 0.000000] ... CHAINHASH_SIZE: 32768
[ 0.000000] memory used by lock dependency info: 8159 kB
[ 0.000000] per task-struct memory footprint: 1920 bytes
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1596.350 MHz processor
[ 0.000079] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.70 BogoMIPS (lpj=6385400)
[ 0.000092] pid_max: default: 32768 minimum: 301
[ 0.000119] ACPI: Core revision 20150619
[ 0.020786] ACPI: All ACPI Tables successfully acquired
[ 0.020907] Security Framework initialized
[ 0.020921] AppArmor: AppArmor initialized
[ 0.020926] Yama: becoming mindful.
[ 0.021956] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.023298] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.023776] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.023800] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.025053] Initializing cgroup subsys blkio
[ 0.025089] Initializing cgroup subsys memory
[ 0.025118] Initializing cgroup subsys devices
[ 0.025152] Initializing cgroup subsys freezer
[ 0.025186] Initializing cgroup subsys perf_event
[ 0.025198] Initializing cgroup subsys hugetlb
[ 0.025250] Disabled fast string operations
[ 0.025256] CPU: Physical Processor ID: 0
[ 0.025261] CPU: Processor Core ID: 0
[ 0.025270] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.025276] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.025284] mce: CPU supports 7 MCE banks
[ 0.025304] CPU0: Thermal monitoring enabled (TM1)
[ 0.025324] process: using mwait in idle threads
[ 0.025333] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.025339] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.025573] Freeing SMP alternatives memory: 24K (ffffffff81ebe000 - ffffffff81ec4000)
[ 0.041867] ftrace: allocating 29043 entries in 114 pages
[ 0.058725] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.059374] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.099044] TSC deadline timer enabled
[ 0.099049] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz (fam: 06, model: 2a, stepping: 07)
[ 0.099105] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[ 0.099149] ... version: 3
[ 0.099155] ... bit width: 48
[ 0.099160] ... generic registers: 4
[ 0.099165] ... value mask: 0000ffffffffffff
[ 0.099170] ... max period: 0000ffffffffffff
[ 0.099175] ... fixed-purpose events: 3
[ 0.099180] ... event mask: 000000070000000f
[ 0.101370] x86: Booting SMP configuration:
[ 0.101377] .... node #0, CPUs: #1
[ 0.102423] Disabled fast string operations
[ 0.105076] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.105674] #2
[ 0.106701] Disabled fast string operations
[ 0.109366] #3<6>[ 0.110400] Disabled fast string operations
[ 0.112582] x86: Booted up 1 node, 4 CPUs
[ 0.112596] smpboot: Total of 4 processors activated (12770.80 BogoMIPS)
[ 0.117648] devtmpfs: initialized
[ 0.124764] evm: security.selinux
[ 0.124770] evm: security.SMACK64
[ 0.124775] evm: security.capability
[ 0.124958] PM: Registering ACPI NVS region [mem 0xdae7f000-0xdaf9efff] (1179648 bytes)
[ 0.125359] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.127014] NET: Registered protocol family 16
[ 0.140564] cpuidle: using governor ladder
[ 0.156538] cpuidle: using governor menu
[ 0.156685] ACPI: bus type PCI registered
[ 0.156984] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.156995] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.157010] PCI: Using configuration type 1 for base access
[ 0.157724] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.178394] ACPI: Added _OSI(Module Device)
[ 0.178403] ACPI: Added _OSI(Processor Device)
[ 0.178409] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.178415] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.192430] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.202231] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.204186] ACPI: Dynamic OEM Table Load:
[ 0.204216] ACPI: SSDT 0xFFFF88011A015800 000688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.206739] ACPI: Dynamic OEM Table Load:
[ 0.206766] ACPI: SSDT 0xFFFF88011A7C9400 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.209098] ACPI: Dynamic OEM Table Load:
[ 0.209125] ACPI: SSDT 0xFFFF88011A00EA00 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.212939] ACPI : EC: EC started
[ 0.214519] ACPI: Interpreter enabled
[ 0.214546] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[ 0.214609] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.214616] ACPI: Using IOAPIC for interrupt routing
[ 0.214699] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.238244] ACPI: Power Resource [FN00] (off)
[ 0.238739] ACPI: Power Resource [FN01] (off)
[ 0.239111] ACPI: Power Resource [FN02] (off)
[ 0.239476] ACPI: Power Resource [FN03] (off)
[ 0.239840] ACPI: Power Resource [FN04] (off)
[ 0.242511] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.242525] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.243170] \_SB_.PCI0:_OSC invalid UUID
[ 0.243172] _OSC request data:1 1f 0
[ 0.243179] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.244163] PCI host bridge to bus 0000:00
[ 0.244172] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.244180] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.244187] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.244195] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.244204] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
[ 0.244214] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.244278] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.244707] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[ 0.244744] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.244757] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.244765] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.245249] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.245313] pci 0000:00:16.0: reg 0x10: [mem 0xf0705000-0xf070500f 64bit]
[ 0.245434] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.245808] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.245864] pci 0000:00:1a.0: reg 0x10: [mem 0xf070a000-0xf070a3ff]
[ 0.246003] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.246339] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.246401] pci 0000:00:1b.0: reg 0x10: [mem 0xf0700000-0xf0703fff 64bit]
[ 0.246544] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.246742] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.246925] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.247080] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.247254] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.247438] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.247593] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.247766] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.247946] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.248101] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.248442] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.248497] pci 0000:00:1d.0: reg 0x10: [mem 0xf0709000-0xf07093ff]
[ 0.248637] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.248996] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[ 0.249468] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.249528] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f]
[ 0.249546] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097]
[ 0.249563] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087]
[ 0.249580] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093]
[ 0.249597] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.249615] pci 0000:00:1f.2: reg 0x24: [mem 0xf0708000-0xf07087ff]
[ 0.249684] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.250012] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.250051] pci 0000:00:1f.3: reg 0x10: [mem 0xf0704000-0xf07040ff 64bit]
[ 0.250099] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.250819] pci 0000:01:00.0: [8086:0091] type 00 class 0x028000
[ 0.251487] pci 0000:01:00.0: reg 0x10: [mem 0xf0600000-0xf0601fff 64bit]
[ 0.252965] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.253243] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.260960] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.260977] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff]
[ 0.261203] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.261403] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.261542] pci 0000:02:00.0: reg 0x18: [mem 0xf0404000-0xf0404fff 64bit pref]
[ 0.261628] pci 0000:02:00.0: reg 0x20: [mem 0xf0400000-0xf0403fff 64bit pref]
[ 0.261924] pci 0000:02:00.0: supports D1 D2
[ 0.261926] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.262073] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.268844] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.268857] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.268873] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.269048] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.269131] pci 0000:03:00.0: reg 0x10: [mem 0xf0500000-0xf0507fff 64bit]
[ 0.269330] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.269604] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.269620] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.271832] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.272037] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.272230] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.272418] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.272605] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[ 0.272829] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.273033] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.273220] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[ 0.274723] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.274886] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.275284] ACPI : EC: 0 stale EC events cleared
[ 0.276111] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.276119] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.276136] vgaarb: loaded
[ 0.276141] vgaarb: bridge control possible 0000:00:02.0
[ 0.276975] SCSI subsystem initialized
[ 0.277161] libata version 3.00 loaded.
[ 0.277262] ACPI: bus type USB registered
[ 0.277347] usbcore: registered new interface driver usbfs
[ 0.277390] usbcore: registered new interface driver hub
[ 0.277492] usbcore: registered new device driver usb
[ 0.278021] PCI: Using ACPI for IRQ routing
[ 0.281743] PCI: pci_cache_line_size set to 64 bytes
[ 0.281875] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.281884] e820: reserve RAM buffer [mem 0xd9c9f000-0xdbffffff]
[ 0.281887] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[ 0.281890] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff]
[ 0.282722] NetLabel: Initializing
[ 0.282728] NetLabel: domain hash size = 128
[ 0.282733] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.282795] NetLabel: unlabeled traffic allowed by default
[ 0.283030] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.283044] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.285163] clocksource: Switched to clocksource hpet
[ 0.332511] AppArmor: AppArmor Filesystem Enabled
[ 0.332793] pnp: PnP ACPI init
[ 0.333518] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.333529] system 00:00: [io 0x1000-0x100f] has been reserved
[ 0.333537] system 00:00: [io 0x5000-0x5003] has been reserved
[ 0.333545] system 00:00: [io 0xffff] has been reserved
[ 0.333553] system 00:00: [io 0x0400-0x0453] could not be reserved
[ 0.333561] system 00:00: [io 0x0458-0x047f] has been reserved
[ 0.333569] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.333577] system 00:00: [io 0x0a00-0x0a0f] has been reserved
[ 0.333584] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.333593] system 00:00: [io 0x5000-0x500f] could not be reserved
[ 0.333635] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.333733] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.333904] system 00:02: [io 0x0454-0x0457] has been reserved
[ 0.333917] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.334022] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.334158] pnp 00:04: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
[ 0.334629] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.334639] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.334647] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.334655] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.334663] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.334671] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.334679] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.334687] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.334696] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.334705] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.334716] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.335704] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.335766] pnp: PnP ACPI: found 7 devices
[ 0.347709] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.347776] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.347790] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff]
[ 0.347811] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.347819] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.347837] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.347855] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.347868] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.347889] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.347892] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.347894] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.347896] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff window]
[ 0.347898] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
[ 0.347900] pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff]
[ 0.347902] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.347904] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.347907] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff]
[ 0.348053] NET: Registered protocol family 2
[ 0.348784] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.349354] TCP bind hash table entries: 32768 (order: 9, 2097152 bytes)
[ 0.351769] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.351946] UDP hash table entries: 2048 (order: 6, 327680 bytes)
[ 0.352334] UDP-Lite hash table entries: 2048 (order: 6, 327680 bytes)
[ 0.352943] NET: Registered protocol family 1
[ 0.352979] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.354843] PCI: CLS 64 bytes, default 64
[ 0.355149] Trying to unpack rootfs image as initramfs...
[ 0.443949] Freeing initrd memory: 3576K (ffff8800378f4000 - ffff880037c72000)
[ 0.443971] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.443979] software IO TLB [mem 0xd5c9f000-0xd9c9f000] (64MB) mapped at [ffff8800d5c9f000-ffff8800d9c9efff]
[ 0.444185] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 0.444195] hw unit of domain pp0-core 2^-16 Joules
[ 0.444201] hw unit of domain package 2^-16 Joules
[ 0.444206] hw unit of domain pp1-gpu 2^-16 Joules
[ 0.444519] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
[ 0.444549] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
[ 0.444575] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28
[ 0.444601] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28
[ 0.444807] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 0.444892] Scanning for low memory corruption every 60 seconds
[ 0.446504] futex hash table entries: 2048 (order: 6, 262144 bytes)
[ 0.446681] Initialise system trusted keyring
[ 0.446837] audit: initializing netlink subsys (disabled)
[ 0.446933] audit: type=2000 audit(1443701312.428:1): initialized
[ 0.448132] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.448710] VFS: Disk quotas dquot_6.6.0
[ 0.448861] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.449880] fuse init (API version 7.23)
[ 0.452408] Key type asymmetric registered
[ 0.452436] Asymmetric key parser 'x509' registered
[ 0.452499] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.452701] io scheduler noop registered
[ 0.452710] io scheduler deadline registered (default)
[ 0.452758] io scheduler cfq registered
[ 0.452766] start plist test
[ 0.455380] end plist test
[ 0.456608] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.456637] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.456890] intel_idle: MWAIT substates: 0x21120
[ 0.456892] intel_idle: v0.4 model 0x2A
[ 0.456893] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.458505] ACPI: AC Adapter [ADP1] (on-line)
[ 0.458796] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.458857] ACPI: Lid Switch [LID0]
[ 0.459021] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.459077] ACPI: Power Button [PWRB]
[ 0.459246] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.459259] ACPI: Power Button [PWRF]
[ 0.463857] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.463866] ACPI: Thermal Zone [TZ00] (74 C)
[ 0.464757] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.464765] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.464896] GHES: HEST is not enabled!
[ 0.465352] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.476031] ACPI: Battery Slot [BAT1] (battery present)
[ 0.477081] Linux agpgart interface v0.103
[ 0.486781] brd: module loaded
[ 0.491605] loop: module loaded
[ 0.496456] ahci 0000:00:1f.2: version 3.0
[ 0.496884] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.509185] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode
[ 0.509200] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 0.535826] scsi host0: ahci
[ 0.536479] scsi host1: ahci
[ 0.537064] scsi host2: ahci
[ 0.537667] scsi host3: ahci
[ 0.538256] scsi host4: ahci
[ 0.538773] scsi host5: ahci
[ 0.538995] ata1: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708100 irq 25
[ 0.539007] ata2: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708180 irq 25
[ 0.539015] ata3: DUMMY
[ 0.539022] ata4: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708280 irq 25
[ 0.539032] ata5: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708300 irq 25
[ 0.539040] ata6: DUMMY
[ 0.540858] libphy: Fixed MDIO Bus: probed
[ 0.541325] tun: Universal TUN/TAP device driver, 1.6
[ 0.541331] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 0.541553] PPP generic driver version 2.4.2
[ 0.542023] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.542247] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
[ 0.552039] xhci_hcd 0000:03:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
[ 0.552856] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.552863] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.552871] usb usb1: Product: xHCI Host Controller
[ 0.552876] usb usb1: Manufacturer: Linux 4.2.3-rc1-1-iniza-small xhci-hcd
[ 0.552882] usb usb1: SerialNumber: 0000:03:00.0
[ 0.553876] hub 1-0:1.0: USB hub found
[ 0.553965] hub 1-0:1.0: 2 ports detected
[ 0.554920] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.554936] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[ 0.555100] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.555222] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.555228] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.555236] usb usb2: Product: xHCI Host Controller
[ 0.555241] usb usb2: Manufacturer: Linux 4.2.3-rc1-1-iniza-small xhci-hcd
[ 0.555247] usb usb2: SerialNumber: 0000:03:00.0
[ 0.555810] hub 2-0:1.0: USB hub found
[ 0.555880] hub 2-0:1.0: 2 ports detected
[ 0.556475] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.556483] ehci-pci: EHCI PCI platform driver
[ 0.556830] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.556857] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.556886] ehci-pci 0000:00:1a.0: debug port 2
[ 0.560874] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.560909] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf070a000
[ 0.573055] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.573224] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.573231] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.573239] usb usb3: Product: EHCI Host Controller
[ 0.573244] usb usb3: Manufacturer: Linux 4.2.3-rc1-1-iniza-small ehci_hcd
[ 0.573249] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.573809] hub 3-0:1.0: USB hub found
[ 0.573840] hub 3-0:1.0: 2 ports detected
[ 0.574659] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.574680] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.574706] ehci-pci 0000:00:1d.0: debug port 2
[ 0.578622] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.578654] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0709000
[ 0.589015] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.589213] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.589220] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.589228] usb usb4: Product: EHCI Host Controller
[ 0.589233] usb usb4: Manufacturer: Linux 4.2.3-rc1-1-iniza-small ehci_hcd
[ 0.589238] usb usb4: SerialNumber: 0000:00:1d.0
[ 0.589822] hub 4-0:1.0: USB hub found
[ 0.589855] hub 4-0:1.0: 2 ports detected
[ 0.590307] ehci-platform: EHCI generic platform driver
[ 0.590341] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.590359] ohci-pci: OHCI PCI platform driver
[ 0.590396] ohci-platform: OHCI generic platform driver
[ 0.590427] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.590561] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12
[ 0.596715] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.596772] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.597788] mousedev: PS/2 mouse device common for all mice
[ 0.599681] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.599728] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.599900] device-mapper: uevent: version 1.0.3
[ 0.600332] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@xxxxxxxxxx
[ 0.600372] Intel P-state driver initializing.
[ 0.601304] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.602085] NET: Registered protocol family 10
[ 0.604615] NET: Registered protocol family 17
[ 0.604696] Key type dns_resolver registered
[ 0.606798] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.607841] Loading compiled-in X.509 certificates
[ 0.609709] Loaded X.509 cert 'Build time autogenerated kernel key: 279e4eefb3540a142244e8cfce680039a3630a85'
[ 0.609763] registered taskstats version 1
[ 0.617668] Key type trusted registered
[ 0.631052] Key type encrypted registered
[ 0.631072] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.631081] evm: HMAC attrs: 0x1
[ 0.632042] rtc_cmos 00:01: setting system clock to 2015-10-01 12:08:32 UTC (1443701312)
[ 0.632217] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.632224] EDD information not available.
[ 0.856938] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.858255] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133
[ 0.858276] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.859676] ata1.00: configured for UDMA/133
[ 0.860638] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 A6C0 PQ: 0 ANSI: 5
[ 0.861969] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 0.861982] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 0.862357] sd 0:0:0:0: [sda] Write Protect is off
[ 0.862367] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.862408] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.862482] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.884771] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 0.900841] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 0.900856] sda: sda1 sda2 sda3
[ 0.902343] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.920878] usb 1-1: new low-speed USB device number 2 using xhci_hcd
[ 1.017513] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.017532] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.018488] hub 3-1:1.0: USB hub found
[ 1.018880] hub 3-1:1.0: 6 ports detected
[ 1.033448] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.033458] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.034318] hub 4-1:1.0: USB hub found
[ 1.034489] hub 4-1:1.0: 6 ports detected
[ 1.114970] usb 1-1: New USB device found, idVendor=046d, idProduct=c00e
[ 1.114988] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.114995] usb 1-1: Product: USB-PS/2 Optical Mouse
[ 1.115000] usb 1-1: Manufacturer: Logitech
[ 1.115417] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.180709] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.181607] ata2.00: ATA-8: SanDisk iSSD P4 16GB, SSD 9.14, max UDMA/133
[ 1.181632] ata2.00: 31277232 sectors, multi 1: LBA48
[ 1.182381] ata2.00: configured for UDMA/133
[ 1.182784] scsi 1:0:0:0: Direct-Access ATA SanDisk iSSD P4 9.14 PQ: 0 ANSI: 5
[ 1.183731] sd 1:0:0:0: [sdb] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 1.183825] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.184200] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.184211] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.184403] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.186156] sdb: sdb1 sdb2
[ 1.187346] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.292616] usb 3-1.4: new high-speed USB device number 3 using ehci-pci
[ 1.308607] usb 4-1.5: new full-speed USB device number 3 using ehci-pci
[ 1.405973] usb 4-1.5: New USB device found, idVendor=8086, idProduct=0189
[ 1.405983] usb 4-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.440631] tsc: Refined TSC clocksource calibration: 1596.374 MHz
[ 1.440642] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1702c3a922f, max_idle_ns: 440795242034 ns
[ 1.500483] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.545346] usb 3-1.4: New USB device found, idVendor=2232, idProduct=1018
[ 1.545357] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.545366] usb 3-1.4: Product: WebCam SC-13HDL11431N
[ 1.545371] usb 3-1.4: Manufacturer: 123
[ 1.820402] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.821470] Freeing unused kernel memory: 1432K (ffffffff81d58000 - ffffffff81ebe000)
[ 1.821482] Write protecting the kernel read-only data: 12288k
[ 1.821981] Freeing unused kernel memory: 108K (ffff8800017e5000 - ffff880001800000)
[ 1.822348] Freeing unused kernel memory: 636K (ffff880001b61000 - ffff880001c00000)
[ 1.865811] udevd[142]: starting version 175
[ 2.186639] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.186676] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.194378] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc900009ae000, e8:03:9a:36:17:a9, XID 0c900800 IRQ 31
[ 2.194401] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.264498] usbcore: registered new interface driver usbhid
[ 2.264508] usbhid: USB HID core driver
[ 2.338330] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1c.4/0000:03:00.0/usb1/1-1/1-1:1.0/0003:046D:C00E.0001/input/input5
[ 2.338925] hid-generic 0003:046D:C00E.0001: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:03:00.0-1/input0
[ 2.440152] clocksource: Switched to clocksource tsc
[ 2.908891] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[ 3.640048] random: nonblocking pool is initialized
[ 4.086492] usb 3-1.2: new high-speed USB device number 4 using ehci-pci
[ 4.181255] usb 3-1.2: New USB device found, idVendor=12d1, idProduct=1446
[ 4.181267] usb 3-1.2: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[ 4.181277] usb 3-1.2: Product: HUAWEI Mobile
[ 4.181282] usb 3-1.2: Manufacturer: HUAWEI Technology
[ 5.267427] init: ureadahead main process (431) terminated with status 5
[ 9.969404] Adding 262140k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:262140k FS
[ 10.169077] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro
[ 10.357387] udevd[665]: starting version 175
[ 11.614587] lp: driver loaded but no devices found
[ 13.661816] wmi: Mapper loaded
[ 13.802568] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150619/utaddress-254)
[ 13.802583] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.802591] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
[ 13.802600] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.802604] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
[ 13.802611] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.802615] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
[ 13.802623] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.802625] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 14.055001] samsung_laptop: detected SABI interface: SwSmi@
[ 14.791801] [drm] Initialized drm 1.1.0 20060810
[ 14.935587] Bluetooth: Core ver 2.20
[ 14.935638] NET: Registered protocol family 31
[ 14.935640] Bluetooth: HCI device and connection manager initialized
[ 14.935736] Bluetooth: HCI socket layer initialized
[ 14.936560] Bluetooth: L2CAP socket layer initialized
[ 14.936650] Bluetooth: SCO socket layer initialized
[ 15.319798] usbcore: registered new interface driver btusb
[ 15.732925] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
[ 15.747964] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c.
[ 15.763554] psmouse serio1: elantech: Elan sample query result 03, 3f, 86
[ 15.841208] usb-storage 3-1.2:1.0: USB Mass Storage device detected
[ 15.841722] scsi host6: usb-storage 3-1.2:1.0
[ 15.842429] usb-storage 3-1.2:1.1: USB Mass Storage device detected
[ 15.842709] scsi host7: usb-storage 3-1.2:1.1
[ 15.843409] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
[ 15.843671] usbcore: registered new interface driver usb-storage
[ 16.172187] Linux video capture interface: v2.00
[ 16.844057] scsi 6:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 16.844183] scsi 7:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 16.855264] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 16.857998] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 16.861377] sr 6:0:0:0: [sr0] scsi-1 drive
[ 16.861383] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 16.863607] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 16.865066] sr 6:0:0:0: Attached scsi generic sg3 type 5
[ 16.911555] cfg80211: World regulatory domain updated:
[ 16.911562] cfg80211: DFS Master region: unset
[ 16.911565] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 16.911570] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 16.911574] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 16.911577] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 16.911580] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 16.911583] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 17.190087] audit: type=1400 audit(1443694129.065:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=1035 comm="apparmor_parser"
[ 17.190099] audit: type=1400 audit(1443694129.065:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1035 comm="apparmor_parser"
[ 17.190106] audit: type=1400 audit(1443694129.065:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=1035 comm="apparmor_parser"
[ 17.190132] audit: type=1400 audit(1443694129.065:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1009 comm="apparmor_parser"
[ 17.190144] audit: type=1400 audit(1443694129.065:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1009 comm="apparmor_parser"
[ 17.190152] audit: type=1400 audit(1443694129.065:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1009 comm="apparmor_parser"
[ 17.190764] audit: type=1400 audit(1443694129.065:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1035 comm="apparmor_parser"
[ 17.190772] audit: type=1400 audit(1443694129.065:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1035 comm="apparmor_parser"
[ 17.190803] audit: type=1400 audit(1443694129.065:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1009 comm="apparmor_parser"
[ 17.190812] audit: type=1400 audit(1443694129.065:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1009 comm="apparmor_parser"
[ 17.715206] Intel(R) Wireless WiFi driver for Linux
[ 17.715211] Copyright(c) 2003- 2015 Intel Corporation
[ 17.715610] iwlwifi 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 18.074075] init: failsafe main process (1081) killed by TERM signal
[ 18.457797] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 18.469415] usb 3-1.2: USB disconnect, device number 4
[ 19.400781] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 19.400787] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 19.400789] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 19.400793] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
[ 19.401428] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled
[ 19.471310] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 20.092637] ppdev: user-space parallel port driver
[ 20.118381] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.118385] Bluetooth: BNEP filters: protocol multicast
[ 20.118394] Bluetooth: BNEP socket layer initialized
[ 20.135667] Bluetooth: RFCOMM TTY layer initialized
[ 20.135683] Bluetooth: RFCOMM socket layer initialized
[ 20.135709] Bluetooth: RFCOMM ver 1.11
[ 20.567583] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018)
[ 20.587479] input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input7
[ 20.588020] usbcore: registered new interface driver uvcvideo
[ 20.588024] USB Video Class driver (1.1.1)
[ 20.942995] [drm] Memory usable by graphics device = 2048M
[ 20.943073] [drm] Replacing VGA console driver
[ 20.950255] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 20.950263] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 20.950267] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 20.950270] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 20.950273] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 20.950280] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
[ 20.950286] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 20.955242] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 20.955246] [drm] Driver supports precise vblank timestamp query.
[ 20.956604] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 20.982041] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 20.983158] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ 20.984606] [drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 0
[ 20.990788] fbcon: inteldrmfb (fb0) is primary device
[ 21.013882] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 21.015196] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 21.015765] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 21.953111] Console: switching to colour frame buffer device 170x48
[ 21.956705] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 21.956709] i915 0000:00:02.0: registered panic notifier
[ 22.505458] usb 3-1.2: new high-speed USB device number 5 using ehci-pci
[ 22.599974] usb 3-1.2: New USB device found, idVendor=12d1, idProduct=1436
[ 22.599981] usb 3-1.2: New USB device strings: Mfr=4, Product=3, SerialNumber=0
[ 22.599985] usb 3-1.2: Product: HUAWEI Mobile
[ 22.599989] usb 3-1.2: Manufacturer: HUAWEI Technology
[ 22.603438] usb-storage 3-1.2:1.0: USB Mass Storage device detected
[ 22.604747] usb-storage 3-1.2:1.1: USB Mass Storage device detected
[ 22.605496] usb-storage 3-1.2:1.2: USB Mass Storage device detected
[ 22.606270] usb-storage 3-1.2:1.3: USB Mass Storage device detected
[ 22.607043] usb-storage 3-1.2:1.4: USB Mass Storage device detected
[ 22.607804] usb-storage 3-1.2:1.5: USB Mass Storage device detected
[ 22.608400] scsi host13: usb-storage 3-1.2:1.5
[ 22.609503] usb-storage 3-1.2:1.6: USB Mass Storage device detected
[ 22.610021] scsi host14: usb-storage 3-1.2:1.6
[ 22.840209] usbcore: registered new interface driver usbserial
[ 23.606672] scsi 13:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 23.611260] scsi 14:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 23.658985] sr 13:0:0:0: [sr0] scsi-1 drive
[ 23.660929] sr 13:0:0:0: Attached scsi CD-ROM sr0
[ 23.661348] sr 13:0:0:0: Attached scsi generic sg2 type 5
[ 23.662760] r8169 0000:02:00.0 eth0: link down
[ 23.664150] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.671328] sd 14:0:0:0: Attached scsi generic sg3 type 0
[ 23.681233] sd 14:0:0:0: [sdc] Attached SCSI removable disk
[ 24.136135] cdc_ether 3-1.2:1.1 wwan0: register 'cdc_ether' at usb-0000:00:1a.0-1.2, Mobile Broadband Network Device, 02:50:f3:00:00:00
[ 24.136259] usbcore: registered new interface driver cdc_ether
[ 24.201762] usbcore: registered new interface driver option
[ 24.202196] usbserial: USB Serial support registered for GSM modem (1-port)
[ 24.202343] option 3-1.2:1.0: GSM modem (1-port) converter detected
[ 24.205303] usb 3-1.2: GSM modem (1-port) converter now attached to ttyUSB0
[ 24.205689] option 3-1.2:1.3: GSM modem (1-port) converter detected
[ 24.206051] usb 3-1.2: GSM modem (1-port) converter now attached to ttyUSB1
[ 24.206127] option 3-1.2:1.4: GSM modem (1-port) converter detected
[ 24.206446] usb 3-1.2: GSM modem (1-port) converter now attached to ttyUSB2
[ 69.605959] PPP BSD Compression module registered
[ 69.614298] PPP Deflate Compression module registered
[ 70.418285] usb 4-1.5: USB disconnect, device number 3
Attachment:
config-4.2.3-rc1-1-iniza-small
Description: Binary data