[PATCH] serial: 8250: add uart_config entry for PORT_RT2880

[Mans Rullgard]

This adds an entry to the uart_config table for PORT_RT2880
enabling rx/tx FIFOs.  The UART is actually a Palmchip BK-3103
which is found in several devices from Alchemy/RMI, Ralink, and
Sigma Designs.

Signed-off-by: Mans Rullgard <mans@xxxxxxxxx>
---
 drivers/tty/serial/8250/8250_port.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 8e351c4..8f53ed5 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -261,6 +261,14 @@ configured less than Maximum supported fifo bytes */
 				  UART_FCR7_64BYTE,
 		.flags		= UART_CAP_FIFO,
 	},
+	[PORT_RT2880] = {
+		.name		= "Palmchip BK-3103",
+		.fifo_size	= 16,
+		.tx_loadsz	= 16,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+		.rxtrig_bytes	= {1, 4, 8, 14},
+		.flags		= UART_CAP_FIFO,
+	},
 };
 
 /* Uart divisor latch read */
-- 
2.5.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/